• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1833-1842
• /
• 2016

In grid-connected converter control, grid voltage feedforward is usually introduced to suppress the influence of grid voltage distortion on the converter's grid-side AC current. However, owing to the time-delay in control systems, the suppression effect of the grid voltage distortion is seriously affected. In this paper, the positive effects of the grid voltage feedforward control are analyzed in detail, and the time-delay caused by the low-pass filter (LPF) in the voltage filtering circuits and digital control are summarized. In order to reduce the time-delay effect on the performance of the feedforward control, a voltage feedforward control strategy with time-delay compensation is proposed, in which, a leading correction of the feedforward voltage is used. The optimal leading step used in this strategy is derived from analyzing the phase-frequency characteristics of a LPF and the implementation of digital control. By using the optimal leading step, the delay in the feedforward path can be further counteracted so that the performance of the feedforward control in terms of suppressing the influence of grid voltage distortion on the converter output current can be improved. The validity of the proposed method is verified through simulation and experiment results.

• Journal of ILASS-Korea
• /
• v.3 no.1
• /
• pp.19-26
• /
• 1998

The effect of mixture component makes a nelay time and a long total combustion period $\tau_{p\;max}$. The flame propagation delay $\tau_{df}$ was determined by the record of current ion. The pressure release delay $\tau_{dp}$ and $\tau_{p\;max}$ were determined by the indicated pressure diagram in constant volume of the combustion chamber. The results are as follows: 1) The ignition delay $\tau_t$ time takes the minimum value around $\Phi=1.15$. 2) $\tau_{df}$ and $\tau_t$ time increased according to the increases of the concentrated dilution gases, because the adiabatic flame temperature decreased due to the increases of the heat capacity. But dilution gases have little effect on flame nucleus formation delay 3) The relation between $\tau_t$ time and reciprocal laminar burning velocity is almost linear. 4) The increase of the propagation length is accompanied with increased ratio of the $\tau_{df},\;\tau_{dp},\;\tau_{t},\;\tau_{p\;max}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.48-51
• /
• 1996

This note considers the $H^{\infty}$ controller design problem for linear systems with time-varying delays in states. We obtain sufficient conditions for the existence of k-th order $H^{\infty}$ controllers in terms of three linear matrix ineualities(LMIs). These sufficient conditions are dependent on the maximum value of the time derivative of time-varying delay. Furthermore, we briefly explain how to construct such controllers from the positive definite solutions of their LMIs and give an example.e.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.415-419
• /
• 1996

This paper presents motor speed and phase angle detection method using a sinusoidal AC tachogenerator. The 2-phase or 3-phase output tacho-generator can be adopted, and its' output voltages must have sinusoidal waveforms. Because the detection algorithm is simple, the proposed method can be implemented with analog devices of microprocessor conveniently. And the proposed method has a very short detection delay time. Especially in the analog implementation, there is no delay time without the settling time of analog devices. With the Experimental results, it is verified that the proposed method can accurately detect the instantaneous motor speed and phase over the wide ranges.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.406-411
• /
• 1993

A variable structure control scheme that can be applied to the process with input/output delays are proposed and its control performances are evaluated. The proposed VSCS, which is an output fedback scheme, comprises an integrator for tracking the setpoint and the Smith predictor for compensating the effects of time delay. With The VSCS, the robustness against the parameter variations and external disturbances can be achieved even when the controlled process includes I/O delays. And the desired transient response is obtained by simple adjustment of the coefficients of the switching surface equation.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.161-170
• /
• 2007

The proposed switch which has separated data plane and switching plane can make parallel processing for packet data storing, memory address pointer switching and simultaneously can be capable of switching the variable length for IP packets. The proposed architecture does not require the complicated arbitration algorithms in VOQ, also is designed for QoS of generic output queue switch as well as input queue. At the result of simulations, the proposed architecture has less average packet delay than the one of the memory-sharing based architecture and guarantees keeping a certain average packet delay in increasing switch size.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.2
• /
• pp.149-154
• /
• 2000

The purpose of this study is to measure the compression temperature in cylinder by using the fine thermocouple. As for using the thermocouple, it's response time delay should be regarded, even if it is a fine one. So, the output of thermocouple needs some compensation. The compensation circuit, which consists of a differential and an adding circuit is used for the compensate the time lag. And the time constant of the compensation circuit is determined the time between the TDC and the maximum point of the thermocouple output. Using this compensation circuit, the compression temperature is investigated of the cylinder in the diesel engine.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.142-145
• /
• 1999

In this paper, delay performances are evaluated and compared for three dual-plane switch architectures; dual input queue/dual switching plane (DQDP The terms of DQDP, DQDP-PS and DQDP-GQ were not used in [Turner88], [Lee96] and [Son97]. All these tern are designated in this letter for convenience.) switch, DQDP with plane selector (DQDP-PS) switch and DQDP based on output group queueing (DQDP-OGQ) switch. We show that under random traffic these switches give almost identical delay performances to that of the output queueing switch but under bursty traffic only the DQDP-PS and the DQDP-OGQ switches ran do.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.253-257
• /
• 2013

This paper proposes the robust observer design for nonlinear systems with delayed output and external disturbance. It is shown that by considering a nonlinear term of error dynamics as an additional state variable, the nonlinear error dynamics with time delay can be transformed into the linear one with time delay. Sufficient conditions for existence of a robust observer are characterized by linear matrix inequalities. Finally, an illustrative example is given in order to show the effectiveness of our design method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.6
• /
• pp.963-971
• /
• 1990

This paper proposes a memory intensive VLSI architecture for the realization of real-time 3x3 neighborhood processor based on the distributed arithmetic. The proposed architecture is characterized by a bit serial and multi-kernel parallel processing which exploits the pixel kernel parallelism and concurrency. The chip implements 8 neighborhood processing elements in parallel with efficirnt input and output modules which operate concurrently. Besides the a4chitectural design of a neighborhood processor, the design methodology using module generator concept has been considered and MOGOT(MOdule Generator Oriented VLSI design Tool) has been constructed based on the workstation. Based on these design environments MOGOT, it has been shown that the main part of the suggested architecture can be designed efficiently using 2\ulcorner double metal CMOS technology. It includes design of input delay and data conversion module, look-up table for inner product operation, carry save accumulator, output data converter and delay module, and control module.