• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4317-4328
• /
• 2023

To ensure the measuring accuracy of the wall temperature, the outer wall temperature measurement values by using three kinds of thermocouple welding methods were analyzed and evaluated in the paper, including single-point flush-mounted in the wall groove method, single-point insert-mounted in the wall groove, and outer surface direct welding method, based on the application of a tube-in-tube condensing heat exchanger. And the impacts of silver, tin, and thermal resistance adhesive as filling materials on wall temperature measurement were also investigated, and the results were compared to that obtained without filling materials. The results showed that the wall temperatures measured by the three welding methods were lower than the theoretically calculated value. And the wall temperature measured by the outer surface direct welding method was lowest under the same experimental conditions. The wall temperatures measured by single-point flush-mounted and insert-mounted in the wall groove methods were also affected by different welding filling materials. It was found that the greater the thermal resistance of filling materials, the smaller the heat loss. By analyzing the reasons for the low measured value of wall temperature, a new wall temperature measurement method was developed to improve the accuracy of the current measurement method. Meanwhile, the outer wall temperature measurement experiments of vertical and horizontal heat transfer tubes were carried out to validate and calibrate the improved outer wall temperature measurement method. The results showed that the average outer wall temperature deviation measured by the improved wall temperature measurement method ranged from - 0.82% to +2.29% for vertical tubes and - 4.75% to - 1.44% for horizontal tubes, and the improved measurement method had good measurement accuracy.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.375-382
• /
• 2013

Down through the years, human needs and desires have required a robot system to work at hazardous environments instead. Current painting task is costly and laborious, and it exposes workers to significant health and safety risks. Automation system offers potential improvement in this area and is especially well suited to the outer-wall painting tasks in concrete structures. This paper introduces the result of gondola-type building management robot(G-BMR) platform and mechanism for moving/tasking on building outer-wall for the outer-wall painting. Its technical and economic feasibility are conducted, and it is concluded that developing G-BMR is physically and economically feasible in this research. And we discuss about the future of G-BMR and automation in construction field.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.369-382
• /
• 2016

The studies on the rural housing have focused on folk housing, but this study focuses on the contemporary rural housing with special reference to the roof types/materials and the outer wall materials. The research area of this study is the fourteen rural settlements in Jeju Island. The hip roof type, the hip/flat roof type, the simple-flat roof type, the gable roof type, and the eyebrow-and-flat roof type are the most frequent roof types. Among the roof materials, the precoated steel plate, the artificial slate, the cement, the cement/roof tile, and the cement/artificial slate are the most frequent materials. The cement holds more than a half of the outer wall materials, and the cement/basalt rock, the tile/cement, the tile, and the diverse siding are the next frequent outer wall materials. The comparison of the rural housing reveals that there are some clear differences between Jeju Island and Gyeongnam Province in terms of the roof types and the outer wall materials.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.40-47
• /
• 2015

In this study, temperature characteristics and fire damage form were analyzed to investigate flame spreading form and fire probability from ignition sources subject to drivit component materials which is finishing material in architecture. Ignition sources were limited to a gas torch and exterior panel board fire, and the size of the sample was manufacture in 30 cm length ${\times}$ 50 cm height ${\times}$ 5cm thickness size. Marble (inner wall) + 3 mm drivit (outer wall), marble (inner wall) + 4 mm plaster stone (outer wall), sandwich panel + 3 mm driver bit (outer wall), sandwich panel + 3 mm driver bit + insulation (outer wall), and gypsum board (inner wall) + 3 mm drivit (outer wall) were prepared for the sample. As result of the research for temperature characteristics, large temperature difference by each material was shown in $218^{\circ}C{\sim}995^{\circ}C$ at 30 seconds and $501^{\circ}C{\sim}1078^{\circ}C$ at 300 seconds. Especially when the inner wall was a plaster board, lowest temperature of $501^{\circ}C$ was shown at 300 seconds and marble inner wall showed the following lowest temperature of $900^{\circ}C$. Temperature rising over $1000^{\circ}C$ was shown in other materials. Regarding fire damage form, drivit or gypsum board outer wall parts exposed to fire showed combustion and carbonization to show calcination(breaking phenomenon) and influence of heat exposure was higher as calcination became more severe.

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.75-85
• /
• 2018

The Grenpell tower fire in England in June of 2016 is a representative example of damage caused by a vertical fire spreading through external insulation. Organic insulation materials, which are widely used in external insulation, have the disadvantage that they have good insulation performance but are vulnerable to fire. Aluminum composite panels are used as exterior wall finishing materials, and plastics used in aluminum are regarded as the cause of vertical fire spread. Due to the steel frame used to secure the aluminum composite panel to the outer wall, a cavity is formed between the outer wall and outer wall finish. When a fire occurs on the outer wall, the flammable outer wall as well as the flame generated from the heat-insulating material spreads vertically through the cavity, resulting in damage to people and property. In Korea, material unit performance tests are carried out by the Ministry of Land, Infrastructure and Transport notice 2015 - 744. However, in the UK, the BS 8414 test is used to measure the vertical fire spreading time on the outer wall in real scale fire tests. In this study, the risk of external wall fire was evaluated in an actual fire by conducting a real scale wall fire test (BS 8414), which was carried out in Europe, using aluminum composite panels of semi-noncombustible materials suitable for current domestic standards. The purpose of this study was to confirm the limitations of material unit evaluation of finishing materials and to confirm the necessity of introducing a system to prevent the spread of outer wall fire through an actual scale fire test.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.32-39
• /
• 2016

The purpose of this study is create a comparative analysis of the characteristics of various materials which were used on the outer wall of F.L.Wright's works. The research results will be summarized as follows: 1) Wright thought that the outer wall was not just a physical object which divides the space of a house but it includes the image of the total exterior form, as well as, the economical factors of the age. 2) He tried to sublimate architectural image of his own style with the change of time because he recognized difficulties and limitations of traditional materials and economic feasibility. 3) He used nature-friendly material like wood and brick which were used in various methods of his natural architectural concept. 4) Some of Wright's early works were acculturated by classical architectural components such as the column to emphasize verticality of architectural form. The columns play a division role in the face of the outer wall creating a dynamic image and this also controls the amount of light that enters inside the house.

• Journal of the Korean housing association
• /
• v.21 no.1
• /
• pp.23-30
• /
• 2010

The purpose of this study is to analyze the elevations of standard rural house designs after the 1990's. Various types of analysis were carried out on a total of 18 different sizes and 50 types of designs with p'yong sizes ranging from 12 to 44. The objects of analysis are the various elevations & the roof types that were supplied in the standard rural house design according to each year 1995 (8 sizes 20 types), 1997 (8 sizes 8 types), 1998 (l size 8 types), 2000 (2 sizes 4 types), 2001 (2 sizes 4 types), and 2004 (3 sizes 6 types). Results from the analysis demonstrate that (1) The gable roof has been used as the roofing type for standard rural house design since 1990. However the roof types of the standard rural house design includes only a few different types of gable roofs and roof materials(most roof types use asphalt shingle). (2) While most front elevations have been altered from asymmetrical to symmetrical most rear elevations have evolved from symmetrical to asymmetrical proportions since the 1990's (3) While siding materials and red-brick were most commonly used the main outer-wall materials prior to 2000, environmentally-friendly materials have been used as outer-wall materials since 2000. (4) In terms of the analysis of outer-wall objects before 2000 the walls were even, yet after 2000 these outer-walls evolved to become concave-convex walls. In other words, the evolution of the outer-wall has included a variety of wall types.

• Applied Microscopy
• /
• v.14 no.2
• /
• pp.38-51
• /
• 1984

Fine structure of dormant and swollen conidiospore from Trichoderma koningii and the mechanism of protoplasting from the conidiospore were studied by scanning and transmission electron microscopy. The cell wall of dormant conidiospore was two-layered structure which consisted of electron dense outer layer and electron transparent inner layer. After 8.5 hrs incubation. the conidiospore was swollen and the outer layer of cell wall shown unequal thickness and partial breakage. Protoplast was released through the pore which has been formed by the breakage of outer layer and dissolution of newly synthesized cell wall for germ-tube formation. Swollen conidiospore and protoplast in releasing process contained various cell organelles and vacuoles with electron dense materials. The protoplast contained looser cytoplasm and had no cell wall materials outside of plasmamembrane.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.3
• /
• pp.125-131
• /
• 2004

Nowadays, it seems we are in the high time of construction design because development of construction technology widen the option of construction exterior closing materials and deepen the high-tech construction method with all various materials. When we see the flow of construction market, the mainstream is the high-rise intelligent building, which makes the best use of the small midtown area efficently. Therefore, Alum curtain wall is becoming the main material of exterior construction, the concept of which is changing from just a simple window frame to an outer wall which has comprehensive function and capability. As we think of the importance of Curtain wall as a comprehensive outer wall, We should do thorough technical examination and verification at the stage of construction design and plan of carrying out construction.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.66-73
• /
• 2014

This study was considered to occur the local wall thinning at elbow which is flowing the steam and high-pressure water of high-temperature. The angle of elbow is ${\Theta}=45^{\circ}$ and $67.545^{\circ}$. The damage behaviors of inner or outer wall thinning elbow under internal pressure were calculated by FEA(finite element analysis). We compared the simulated results by FEA with experimental data. The FEA results are as follows: In the FEA results of three types of wall thinning ratio, the circumferential and longitudinal stresses show the similar values regardless of the angle of elbow, respectively. The circumferential strain was greater at elbow of small angle, but the longitudinal strain was nearly same. The FEM stress of outer wall thinning elbow was slightly higher than that of the inner wall thinning elbow, and strain was also slightly higher. In the experiments, the circumferential strain was increased with the increase in the internal pressure, and increased rapidly on about 0.2% of strain. The longitudinal strain was small. The strain at break was much smaller than 0.2%. In the relation between pressure and eroded ratio, the criteria that can be used safely under operating pressure and design pressure were obtained. The results of FEA were in relatively good agreement with those of the experiment.