• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.431-441
• /
• 2008

A public opinion poll's importance is at this time increasing now. Especially, a news report with a fair and objective execution and investigative reporting Moral Code is very important. But a research on the basis of investigative reporting Moral Code is not yet carried out. In this paper, with the center of a public opinion poll involved in the 17th Presidential Election of Korea, investigative reporting Moral Code has been analyzed measurably how well observed in the Press. Furthermore, it has been compared with findings carried out in the year 2002. Finally, through comparing response rate with actual results acquired in a survey of public opinion, I proposed a response rate acquisition.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1555-1562
• /
• 2023

Natural circulation phenomena have been nowadays largely revisited aiming to investigate the performances of passive safety systems in carrying-out heat removal under accidental conditions. For this purpose, assessment studies using CFD (Computational Fluid Dynamics) and also 3D thermal-hydraulic system codes are considered at different levels of the design and safety demonstration issues. However, these tools have not being extensively validated for specific natural circulation flow regimes involving flow mixing, temperature stratification, flow recirculation and instabilities. In the present study, an experimental test case based on a small-scale pool test rig experiment performed by Korea Atomic Energy Research Institute, is considered for code-to-code and code-to-experimental data comparison. The test simulation is carried out using the FLUENT and the 3D thermal-hydraulic system CATHARE-2 codes. The objective is to evaluate and compare their prediction capabilities with respect to the test conditions of the experiment. It was observed that, notwithstanding their numerical and modelling differences, similar agreement results are obtained. Nevertheless, additional investigations efforts are still needed for a better representation of the considered phenomena.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.121-130
• /
• 2000

This study focused on evaluating the reliability of code formulas such as those of the current Korean Building Code(KBC 1988). UBC 1997, NBCC 1995. and BSLJ 1994 for estimating the fundamental period of RC apartment buildings with shear-wall dominant systems, representative of typical residential buildings in Korea. For this purpose, full-scale measurements were carried out on fifty RC apartment buildings, and these results were compared to those obtained by code formulas and also by dynamic analysis. Although these code formulas are based on the measured periods of buildings during various earthquakes and building period varies with the amplitude of structural deflection or strain level, ambient surveys should provide an effective tool for experimentally verifying the design period to the completed building. This comparison shows that comparatively large errors are likely to occure when the code formula of KBC 1988 is used, and all the other code formulas are not sufficient to estimate the fundamental period of apartment buildings with shear-wall dominant systems. An improved formula is proposed by regression analysis on the basis of the measured period data. The proposal is for the servicebility stress level, but it can also be applied for seismic code in the regions of low seismicity similar to Korea.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.699-700
• /
• 2011

본 논문에서는 현재 스마트폰에서 자주 사용하고 있는 QR-Code에 대해서 악의적인 변형 코드 및 올바르지 않은 URL로의 접속 등에 의해 개인정보 유출 등의 피해를 막기 위한 방법을 연구한다. QR-Code를 디코딩하여 URL 접속 시에 직접적인 필터링은 어려우므로 접속하기 전 해당 QR-Code를 디코딩하여 나온 결과와 원래의 URL을 비교할 수 있는 서버를 만들어 그 서버에 접속하여 스마트폰 사용자에게 접속 여부를 통지해주는 시스템을 구축해보아 스마트폰 사용자들에게 도움이 되고자 한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.112-121
• /
• 2013

An approach for composing a performance optimized computational code is suggested for the latest microprocessors. The concept of the code optimization, termed localization, is maximizing the utilization of the second level cache that is common to all the latest computer systems, and minimizing the access to system main memory. In this study, the localized optimization of the LU-SGS (Lower-Upper Symmetric Gauss-Seidel) code for the solution of fluid dynamic equations was carried out in three different levels and tested for several different microprocessor architectures widely used these days. The test results of localized optimization showed a remarkable performance gain of more than two times faster solution than the baseline algorithm for producing exactly the same solution on the same computer system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.55-60
• /
• 2004

This study is concerned to the perforation phenomena of the oblique dual-plate by projectile. Experiment and simulation related to that was carried out. the variables considered in this phenomena include the electrolytic zinc coated steel sheet and carbon steel rod. In the former, the confirmation and projectile velocity possible phenomena of real phenomena is done, the latter, the effect of parameter such as time-step and grid space length is analized by using the three-dimensional Lagrangian explicit time-integration finite element code, HEMP. this code use the eight node hexahedral elements and in this study, Von-Mises Criteria is used as the strength model, Mie-Gruneisen is as the Equation of State. the simulation was performed by contrast with the experiment. through the calibration of the parameter of lagrangian code, reasonable result was approached.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1397-1409
• /
• 2018

Stiffened plates with high slenderness parameters show large out-of-plane deflections, due to elastic buckling, which may occur before the plates reach their ultimate strength. From a serviceability point of view, restriction of out-of-plane deflections exceeding the fabrication tolerance is of primary importance. Compressive strength at the serviceability limit state (SLS) for slender stiffened plates under uniaxial stress was investigated through nonlinear elasto-plastic finite element analysis, considering both geometric and material nonlinearity. Both normal and high-performance steel were considered in the study. The SLS was defined based on a deflection limit and an elastic buckling strength. Probabilistic distributions of the SLS strengths were obtained through Monte Carlo simulations, in association with the response surface method. On the basis of the obtained statistical distributions, partial safety factors were proposed for SLS. Comparisons with the ultimate strength of different design codes e.g. Japanese Code, AASHTO, and Canadian Code indicate that AASHTO and Canadian Code provide significantly conservative design, while Japanese Code matches well with a 5% non-exceedance probability for compressive strength at SLS.

• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.145-150
• /
• 2017

소프트웨어 유지보수는 소프트웨어 생명주기에서 전체 비용의 많은 부분을 차지하고 있다. 소프트웨어를 유지보수하기 위해서는 코드를 읽는 것이 필수적이고, 이는 유지보수 활동에서 가장 많은 시간이 소요되는 활동이다. 코드의 가독성은 사람이 소스코드를 이해하는데 드는 어려움의 정도를 측정하는 메트릭이다. 코드의 가독성이 좋을수록 사람이 소스코드를 이해하기 쉬워진다. 본 논문에서는 소스코드의 가독성을 이분법적으로 판단하는 기존의 연구보다 향상된 기법을 사용하여, 개발 중인 소스코드의 가독성 정도를 정량적으로 측정할 수 있는 새로운 소스코드 가독성 메트릭을 제안한다. 이를 평가하기 위해, 우리는 설문조사를 수행하고 가독성을 가장 잘 설명하는 척도를 찾을 수 있도록 회귀 분석 기법을 사용해 그 결과를 분석할 것이다.

• 한국위성정보통신학회논문지
• /
• 제5권1호
• /
• pp.54-57
• /
• 2010

위성 기반 측위 시스템은 위치 기반 기술의 핵심 기술로서, CDMA 시스템을 사용한다. CDMA 시스템에서 원활한 위치 측위를 하기 위해서는 확산 부호의 정확한 동기가 이루어져야 한다. 본 논문은 확산 부호의 동기 기법 가운데 부호 추적 기법에 초점을 맞춘다. 특히 다중 경로 환경에서 기존의 부호 추적 기법인 DLL 방법은 적합하지 않다. 본 논문은 수신 신호에서 다중 경로 신호를 축출하여 이를 부호 추적 기법에 사용하는 방법을 제안한다. Spirent simulator를 이용하여 제안 기법을 검증하고 성능 평가를 보인다.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.1-8
• /
• 2013

This paper presents the results of experimental and numerical research on the slamming phenomenon. Two experimental techniques were proposed in this study. The traditional free drop tests were carried out. However, the free drop tests done in this study using an LM guide showed excellent repeatability, unlike those of other researchers. The coefficients of variation for the drop test done in this experiment were less than 0.1. The other experimental technique proposed in this study was a novel concept that used a pneumatic cylinder. The pneumatic cylinder could accelerate the specimen over a very short distance from the free surface. As a result, high rates of repeatability were achieved. In the numerical study, the development of in-house code and utilization of commercial code were carried out. The in-house code developed was based on the boundary element method. It is a potential code. This was mostly applied to the computation of the wedge entry problem. The commercial code utilized was FLUENT. Most of the previous slamming research was done under the assumption of a constant body velocity all through the impact process, which is not realistic at all. However, the interaction of a fluid and body were taken into account by employing a user-defined function in this study. The experimental and numerical results were compared. The in-house code based on BEM showed better agreement than that of the FLUENT computation when it cames to the wedge computation. However, the FLUENT proved that it could deal with a very complex geometry while BEM could not. The proposed experimental and numerical procedures were shown to be very promising tools for dealing with slamming problems.