• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1297-1304
• /
• 2002

The phase locked oscillator having a low phase noise and high output in Ku-band was designed. To obtain the low phase noise and high output characteristics of oscillator, the nonlinear equivalent circuits of p-HEMT was analyzed by TOM method and we have decided the trade-off bias point between the low phase noise and the output power of oscillator. The designed phase locked oscillator with prescaler for stable operation, experiment results exhibits output power of 1003m with phase noise in the phase locked state of -824BC/HB at 10mz offset from 13.250Hz, and simulation result of 1003m output power in the phase noise -840Bc/Hz at 10KHz offset frequency respectively. a good agreement has been obtained between simulations and experiments results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.233-236
• /
• 2005

Phase noise in a phase-locked-loop (PLL) is unwanted and unavoidable. It is a main concern in oscillation system especially PLL. The phase noise is derived in term of power spectrum density by using a reliable phase noise model. There are four noise sources being considered in this paper, which are generated by reference oscillator, voltage controlled oscillator, filter, and main divider. The major concern for this paper is the noise from the filter. Two types of second order low pass filter are used in the PLL system. Applying the mathematical phase noise model, the output noises are compared. The total noise from the passive filter is lower than the active filter at the offset frequency range between 1 Hz to 33 kHz.

• Journal of electromagnetic engineering and science
• /
• v.5 no.4
• /
• pp.153-160
• /
• 2005

In this paper, the novel microwave oscillator incorporating a planar cavity resonator(PCR) is presented to reduce the phase noise of the oscillator in a planar environment. Compared to the conventional planar( $\lambda$/4 open stub resonator), the phase noise is improved about 16 dBc/Hz @100 kHz. The design of the oscillator is based on a reflection type configuration using the low 1/f SiGe HBT transistor(LPT16ED). The output power is measured 2.76 dBm at 12.5 GHz. In this paper, the oscillator used to the PCR can be expected to provide a solution for low phase noise oscillator in microwave circuits.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.529-532
• /
• 2006

This letter describes a compact printed helical resonator and its application to a microwave oscillator circuit implemented in coplanar waveguide (CPW) technology. The high quality (Q)-factor and spurious-free characteristic of the resonator contribute to the phase noise reduction and the harmonic suppression of the resulting oscillator circuit, respectively. The designed resonator showed a loaded Q-factor of 180 in a chip area of only 40% of the corresponding miniaturized hairpin resonator without any spurious resonances. The fully planar oscillator incorporated with this resonator showed an additional phase noise reduction of 10.5 dB at a 1 MHz offset and a second harmonic suppression enhancement of 6 dB when compared to those of a conventional CPW oscillator without the planar helical resonator structure.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.145-149
• /
• 2003

The parallel feedback dielectric resonator oscillator (DRO) which is applicable to satellite communications and broadcasting has been investigated. In the design of oscillator, the phase noise is important parameter. In this paper, The proposed oscillator has good phase noise level because it suppressed harmonics. Measurement show the fabricated oscillator is output power of about 9 dBm at fundamental frequency of 12.0 GHz and fundamental frequency suppression of -47.5 dBc. The phase noise level is about -110 dBc/Hz at 100 KHz offset frequency.

• Journal of electromagnetic engineering and science
• /
• v.6 no.3
• /
• pp.160-164
• /
• 2006

This paper describes a compact printed helical resonator and its application to a microwave oscillator circuit implemented in coplanar waveguide(CPW) technology. The high Q-factor and spurious-free characteristic of the resonator contribute to the phase noise reduction and the harmonic suppression of the resulting oscillator circuit, respectively. The designed resonator resonating at the frequency of 5.5 GHz showed a loaded Q of 180 in a chip area of only 40 % of the corresponding miniaturized hairpin resonator without any spurious resonances. The fully planar oscillator incorporated with this resonator showed additional phase noise reduction of 10.5 dB at 1 MHz offset and a second harmonic suppression enhancement of 6 dB when compared to those of a conventional CPW oscillator without the planar helical resonator(PHR) structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.17-23
• /
• 2006

This paper has presented a low phase noise oscillator using a square open loop with microstrip structure. A square open loop resonator has a large coupling coefficient value, which makes a high Q value, and has reduced phase noise. This oscillator has presented the oscillation frequency of 5.84 GHz, harmonics of -15.83 dBc and the phase noise of -111.17 dBc/Hz at the offset frequency of 100 kHz. In conclusion, the proposal structure has improved phase noise of 15 dB at the offset frequency of 100 kHz compared with the conventional structure of oscillator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.865-870
• /
• 2001

In this paper, we analyse the effect of phase noise from PLL frequency synthesizer on 64 QAM when detecting corrupted signals. To predict the phase noise of an oscillator very accurately, we assume that the oscillator is linearly time-varying when the input impulsive current to the oscillator is small. The performance of the detector which detects the corrupted signal by oscillator phase noise is compared with that when the detector is only affected by AWGN and then analyse how much the phase noise degrades the system performance for 64 QAM.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.99-103
• /
• 2005

In this paper, a new technique to reduce the phase noise in microwave oscillators is proposed using the resonant characteristics of the Photonic Bandgap(PBG). We applied PBG structure to ground of the microstrip line resonator with the low Q(Quality factor). Therefore, we improved about 10 dBc in contrast to phase noise characteristic of the conventional microstrip line oscillator at 2.4 GHz ＠ 100 MHz offset. Output power is 7.09 dBm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1538-1543
• /
• 2013

In this paper, a novel split ring resonator is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator. Oscillator using proposed split ring resonator is designed, it has improved phase noise characteristics. At the fundamental frequency of 5.8GHz, 7.22dBm output power and -83.5 dBc@100kHz phase noise have been measured for oscillator with split ring resonator. The phase noise characteristics of oscillator is improved about 9.7dB compared to one using the general ${\lambda}/4$ microstrip resonator. Next, we designed voltage controlled oscillator using proposed split ring resonator with varactor diode. The VCO has 125MHz tuning range from 5.833GHz to 5.845GHz, and phase noise characteristic is -118~-115.5 dBc/Hz@100KHz. Due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.