• 대한전기학회논문지
• /
• 제41권7호
• /
• pp.823-828
• /
• 1992

A thermionic energy converter test station is constructed for the study of electromagnetic energy generation. Of particular interest is the frequency variations due to changes in the interelectrode gap, the electrode temperature, and the cesium vapor pressure. It is found experimentally that the most intense ratio-frequency(rf) oscillations occur at two non-overlapping regions.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.966-975
• /
• 2002

Acoustic behavior in baffled combustion chambers is numerically investigated by adopting linear acoustic analysis. Partial blade baffle, which is a variant of blade baffle, and hub-blade baffle with six blades are employed as baffle models. Through modal analysis, natural frequencies of each acoustic mode in baffled chambers are calculated and the reduction in natural frequencies caused by baffle installation is examined. Through harmonic analysis, acoustic pressure responses of each chamber to acoustic oscillating excitation are shown. The first tangential mode is found to be most sensitive to acoustic oscillation. Acoustic damping effect of baffle is quantified by damping factor. Damping effect of hub-blade baffle is the most appreciable and damping factor of partial blade baffle is much lower than that of blade baffle. Damping effect of six-blade baflle on the second tangential mode is as much as on the first tangential mode and hub-blade baffle can damp out appreciably the first tangential as well as the first radial mode with the aid of hub.

• 한국유체기계학회 논문집
• /
• 제13권5호
• /
• pp.22-28
• /
• 2010

A study has been made of cool-down process on an incompressible fluid contained in a periodically oscillating cylinder when an abrupt cooling of wall temperature is imposed. Characteristics of flow and heat transfer are investigated along the variations of oscillating frequency and amplitude. One found the flow regimes are divided into 4-modes : 1 thermal island mode, 2 thermal island mode, 4 thermal island mode and asymmetry mode. Comprehensive analysis for each mode are given with a physical mechanism on cool-down process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.609-613
• /
• 1986

The resonance frequency and the gain for oscillation of external cavity diode lasers are derived by approximating the phase and the gain conditions. By modifying single mode rate equations for the external cavity diode laser, steady state solutions and their stability are studied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.39-39
• /
• 2010

낮은 에너지를 이용하여 상대론적 영역에서 동작하는 마이크로파 출력장치를 연구하였다 그에 따른 후진파 발진기는 대전력 마이크로파를 발생시키는 장치로서 연구하였으며 관내에 전자빔을 입사시킴으로서 발진이 일어나 출력을 발생 시킨다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1859-1864
• /
• 2000

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.240-247
• /
• 2014

안압의 측정은 각막에 air puff 후 각막의 변형 즉, 각막의 두께나 변위 등 생역학적 성질을 관찰함으로써 이루어진다. 본 논문에서는 녹내장이나 라식의 진단을 위하여 사용되는 안압계의 air puff에 의한 각막의 변형을 주파수 영역에서 분석하였다. Air puff 후 각막의 중심부 주변의 변위에 대한 진동 주파수를 측정함으로써 환자와 정상인을 구별한다. 동영상으로부터 이진 영상을 구하고, 상하 변위 데이터와 곡선 정합의 차를 구하여 시간에 따른 각막 상하 진동 프로파일 데이터를 추출하였다. Fourier 변환으로 비정상인의 진동 주파수는 479.2Hz를 얻었고 정상인의 경우 단단함으로 인하여 702.8Hz의 고주파 성분을 볼 수 있었다. 또한 Hilbert-Huang 변환의 EMD 방법을 이용, 고유 모드 함수로 분해하여 국소적, 비선형, 비정상성을 가지는 데이터를 얻고 주파수와 전력을 분석하였다. 마지막으로 특정 고유 모드 함수에 대한 환자와 정상인의 전력비가 6배 이상 차이가 나는 것을 확인하였다.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.17-24
• /
• 2011

TMED(Transmission Mounted Electric Device) parallel hybrid configuration can realize EV(Electric Vehicle) mode by disengaging the clutch between an engine and a transmission-mounted motor to improve efficiencies of low load driving and regenerative braking. In the EV mode, however, jerk can be induced since there are insufficient damping elements in the drive-train. Though the jerk gives demoralizing influence upon driving comport, adding a physical damper is not applicable due to constraints of the layout. This study suggests the jerk reduction control, composed of active damping method and torque profiling method, to suppress the jerk without hardware modification. The former method creates a virtual damper by generating absorbing torque in the opposite direction of the oscillation. The latter method reduces impulse on the mated gear teeth of the drive-train by limiting the gradient of traction torque when the direction of the torque is reversed. To validate the effectiveness of the suggested strategy, a series of vehicle tests are carried out and it is observed that the amplitude of the oscillation can be reduced by up to 83%.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.123-136
• /
• 2015

The present study numerically investigates the effect of shield on the flow characteristics of Hartmann whistle. The flow characteristics of un-shielded Hartmann whistle are compared with whistles of different shield heights 15 mm, 17 mm, 20 mm, 25 mm and 30 mm. The comparison of Mach number contours and transient velocity vectors of shielded Hartmann whistles with un-shielded ones for the same conditions reveal that the presence of shield causes the exiting jet to stick to the wall of the shield without causing spill-over around the cavity inlet, thus sustaining the shock oscillation as seen in the unshielded Hartmann whistle, which has intense flow/shock oscillation and spill-over around the cavity mouth. The velocity vectors indicate jet regurgitance in shielded whistles showing inflow and outflow phases like un-shielded ones with different regurgitant phases. The sinusoidal variation of mass flow rate at the cavity inlet in un-shielded Hartmann whistle indicates jet regurgitance as the primary operating mode with large flow diversion around the cavity mouth whereas the non-sinusoidal behavior in shielded ones represent that the jet regurgitance is not the dominant operating mode. Thus, this paper sufficiently demonstrates the effect of shield in modifying the flow/shock oscillations in the vicinity of the cavity mouth.

• 한국광학회지
• /
• 제13권1호
• /
• pp.58-64
• /
• 2002

마하젠더형 광세기 변조기를 이용하여 l0 GHz 고조모드잠금된 분산보상 어븀첨가 광섬유 레이저의 출력 안정화 되먹임 제어를 하고 출력의 안정도를 측정하였다. 레이저의 출력 불안정성이 발생하였을 때 나타나는 완화진동 주파수 성분을 억압하도록 공진기 길이를 조정하여 16시간 이상 출력 안정화를 시켰다. 이때, 안정화가 진행되는 동안 rms 위상잡음과 rms진폭잡음은 각각 260 fsec-524 fsec와 4-11.5%의 사이에 분포하였고, BER은 $10^{-13}$ 으로 측정되었다.