• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.69-72
• /
• 2003

Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor powders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. XRD and DC magnetization analysis were performed in order to investigate the fraction of Bi-2223 phase in Bi-2223/Ag HTS tape. We could achieve best Ic of 70 A class at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process. DC magnetization analysis was useful to investigate the fraction of Bi-2223 phase in the Bi-2223/Ag tape.

• 한국결정성장학회지
• /
• 제15권2호
• /
• pp.51-56
• /
• 2005

We prepared orthorhombic $LiMnO_2$ by emulsion drying method. The thermo-gravimetric measurement and X-ray diffraction studies indicated that the orthorhombic $LiMnO_2$ phase was formed above $800^{\circ}C$ by oxygen evaporation process from $LiMn_2O_4$ and $Li_2MnO_3$. In this process, we could control the ordering of $LiMnO_2$ with heating rate. It was observed that electrochemical properties depended on the ordering of this material; the ordered one exhibited good capacity retention, whereas the disordered one suffered capacity fading upon cycling, especially in the 3 V region. Transmission electron microscopic (TEM) study showed that this difference is related with difference in the stress relieving effects in the samples.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1232-1233
• /
• 2006

To co-fire with commercial LTCC (Low Temperature Co-fired Ceramic) materials at $850^{\circ}C{\sim}880^{\circ}C$, different contents of $B_2O_3$ were added to the $Bi_2O_3-ZnO-Nb_2O_5$ (BZN) ceramics. According to the test results, the cubic phase of BZN was transformed into orthorhombic in all the test materials. $BiNbO_4$ phase was formed in test materials with $2{\sim}5wt%$ of $B_2O_3$ addition. The phase transformation of cubic BZN was controlled during the synthesis process with excess ZnO content. The Cubic and orthorhombic phases of BZN could coexist and be sintered densely at $850^{\circ}C/2hr$.

• 공업화학
• /
• 제10권2호
• /
• pp.231-236
• /
• 1999

결정상과 분산도가 조절된 $MoO_3$/$SiO_2$ 담지촉매를 제조하여 촉매의 표면특성과 디벤조티오펜 탈황반응의 활성도를 고찰하였다. Mo의 표면담지량은 4 atoms $Mo/nm^2$이었으며, 실리카 표면 위에 형성된 $MoO_3$의 결정상은 sintered hexagonal, sintered orthorhombic, 및 dispersed hexagonal상이었다. XRD, Raman, 및 $O_2$ 흡착 결과 $MoO_3$의 표면분산도는 sintered hexagonal < sintered orthorhombic < dispersed hexagonal 순으로 증가하였다. TPR 결과 $MoO_3$ 결정은 $650^{\circ}C$에서 $MoO_2$로, $1000^{\circ}C$에서 Mo로 환원됨을 알 수 있었다. 디벤조티오펜 탈황반응을 30기압, $350{\sim}500^{\circ}C$ 온도범위에서 수행하였으며, 실험 결과 활성도는 $MoO_3$ 결정체의 $SiO_2$ 표면에서의 분산도에 비례하여 증가함을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제5권6호
• /
• pp.558-561
• /
• 2004

암모늄헵타몰리브데이트(ammonium heptamolybdate, AHM)를 전구체로 제조한 실리카 담지 몰리브드늄$(MoO_{3}/SiO_{2})$ 촉매의 구조적 특성을 x-ray 회절기(XRD)를 사용하여 자세히 고찰하였다. 몰리브드늄의 표면담지량은 0.2부터 4.0 atoms $Mo/nm^{2}$로 변화하였으며, 담지촉매의 소성온도는 $300\~500^{\circ}C$로 변화하여 열역학적으로 형성 가능한 모든 몰리브드늄산화물의 구조를 고찰하였다. 담지량이 큰 경우(4 atoms $Mo/nm^{2}$), $300^{\circ}C$소성에서는 뭉쳐있거나 잘 분산된 hexagonal 형태의 결정체가 형성되었으며, $500^{\circ}C$로 소성온도를 증가하면 뭉친 orthorhombic 형태의 $MoO_{3}$ 결정체가 형성되었다. 뭉친 orthorhombic 형태의 결정체는 담지량이 1.1 atom $Mo/nm^{2}$이상이 되면 형성된 반면 잘 분산된 hexagonal 형태의 결정체는 가장 큰 표면 담지량 4.0 atoms $Mo/nm^{2}$에서도 고찰하기가 어려웠다. 이러한 hexagonal 결정체의 담체 표면에서의 높은 분산은 암모니아로 인한 몰리브드늄 산화물($MoO_{3}$)과 실리카($SiO_{2}$) 담체 사이의 강한 표면작용에 기인한 것으로 생각된다.

• Bulletin of the Korean Chemical Society
• /
• 제6권4호
• /
• pp.183-186
• /
• 1985

The lattice vibrational calculation of orthorhombic hydrogen chloride is performed using physically realistic potential function which can reproduce the X-ray structure and heat of sublimation of the low temperature phase. The polar coordinates representation is introduced in order to describe the intermolecular interactions in a molecular crystal. The splitting in internal modes is calculated as 49 $cm^{-1}$ and the other modes are in good agreement with experimental results.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.753-756
• /
• 2019

Orthorhombic dysprosium manganite DyMnO₃ with single phase is synthesized using solid-state reaction technique and the crystal structure and dielectric properties as functions of temperature and frequency are investigated. Thermally activated dielectric relaxations are shown in the temperature dependence of the complex permittivity, and the respective peaks are found to be shifted to higher temperatures as the measuring frequency increases. In Arrhenius plots, activation energies of 0.32 and 0.24 eV for the high- and low-temperature relaxations are observed, respectively. Analysis of the relationship between the real and imaginary parts of the permittivity and the frequencies allows us to explain the dielectric behavior of DyMnO₃ ceramics by the universal dielectric response model. A separation of the intrinsic grain and grain boundary properties is achieved using an equivalent circuit model. The dielectric responses of this circuit are discerned by impedance spectroscopy study. The determined grain and grain boundary effects in the orthorhombic DyMnO₃ ceramics are responsible for the observed high- and low-temperature relaxations in the dielectric properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.585-588
• /
• 2003

Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor powders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. AC magnetization analysis were performed in order to investigate the fraction of Bi-2223 phase in Bi-2223/Ag HTS tape. The cross sections of 55 filaments and 61 filaments were investigated after rolled in order to understand deformation mechanism of superconducting cores. We could achieve best Ic of 70 A class at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process. AC magnetization analysis was useful to investigate the fraction of Bi-2223 phase in the Bi-2223/Ag tape.

• 한국자기공명학회논문지
• /
• 제2권1호
• /
• pp.24-32
• /
• 1998

Drawn polyethylene was studied by 13C cross polarization magic angle spinning techniques. Solid-solid phase transition from orthorhombic to monoclinic crystalline phase by drawing was observed. In addition, using a synchronized magic angle spinning 2 dimension technique, we confirmed that macroscopic ordering of the polyethylene was produced by drawing.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.105-108
• /
• 2003

Long length of Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor owders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. We designed and made a continuous Ic measurement system for Bi-2223/Ag HTS tape. We could achieve best Ic of 65 A at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process.