• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.551-562
• /
• 1999

This study was undertaken to investigate the relation between orthodontic force magnitude and the amount of tooth movement. And more light force application for reducing root resorption Twenty-four rats were divided into three experimental groups(A, B, C) based on force magnitude and application method. Springs of 50g force were applied to A group, springs of 100g force were applied to B group and springs of 25g force were applied to C group initially, and after 4 days springs of C group were changed to springs of 50g force. Two kinds of $sentally^{(R)}$(GAC U.S.A.) closed coil spring, 50g and 100g, were used. And we made 25g springs by heat treatment process of 50g springs. Each spring was inserted between the maxillary central incisor and the maxillary left first molar. Amounts of tooth movement were measured everyday by digital caliper($Digimatic^{(R)}$, Mitutoyo, Japan) under inhalation anesthesia for 15 days. After 15 days, all rats were sacrificed and histological samples were obtained with Hematoxyline-Eosin stain and Masson's trichrome stain. Following conclusion were made; 1. Group B showed the mean cumulative tooth movement of $2.19{\pm}0.41mm$ at 15th day, which was greatest among three groups, followed by group C($2.06{\pm}0.10mm$), group A($1.90{\pm}0.49mm$) respectively. however, there was no statistically difference among three groups. 2. All groups showed general tooth movement pattern and A, B, C group finished lag phase at 9th, 8th, 7th day, but there was no statistical significance. 3. Group A,B,C showed root resorption and especially group B showed the most severe root resorption and group C showed milder root resorption than other groups. According to the above results, large initial force with the development of a flirty widespread hyalinized zone may cause severe root resorption, so initial force should be applied lightly to reduce hyalinized area and eventually root resorption and then increased force will induce efficient tooth movement.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.159-174
• /
• 2008

Objective: The purpose of this study was to investigate whether cortical punching could stimulate the expression of OPG, RANK, and RANKL during tooth movement by immunohistochemistry. Methods: 34 sprague-dawley rats (15 weeks old) were allocated into 3 groups: TMC group (experimental group; Tooth Movement with Corticotomy, n = 16), TM group (control group; Tooth Movement only group, n = 16), and non-treatment group (n = 2). 20 gm of orthodontic force was applied to rat incisors by inserting elastic bands. The duration of force application was 1, 4, 7 and 14 days. A microscrew (diameter 1.2 mm) was used for cortical punching of the palatal side of the upper incisors in the TMC group. Results: Distributions of OPG, RANK, and RANKL were evaluated by immunohistochemistry. OPG, RANK and RANKL were observed on experimental and control groups. On the compression side, the degree of the expression of OPG decreased in both groups. The expression of RANK was most prominent in the experimental group of day 4. The expression of RANKL was most intensive and extensive in the experimental group of day 7. However, the expression of OPG was decreased in the experimental and control groups compared to the non treatment group. The expression of OPG, RANK and RANKL after force application were decreased at day 14. Conclusions: These findings suggested that cortical punching might stimulate remodeling of alveolar bone during a 2 week period of tooth movement without any pathologic change.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.547-554
• /
• 1994

This study was carried out in order to find out the soft tissue profile changes associated with maxillary incisor retraction in Angle's class I malocclusion patients. For this study fifty two female adult patients (Maximum Retraction Group 23, Minimum Retraction Group 29) who received orthodontic treatment were chosen. Following conclusions were obtained by analysing the changes of soft tissue and hard tissue before and after treatment. 1. When considering the mean changes of soft tissue and hard tissue, UP, LIP, Ls, Li (p<0.001), Point B, Si (p<0.01), Point A, Ss (p<0.05) were significant posterior movement in Maximum Retraction Group and UIP (p<0.001), LIP, Ls, Li (p<0.01), Point B, Si (p<0.05) were significant posterior movement in Minimum Retraction Group. 2. When considering the correlations between hard tissue and soft tissue changes, greater correlations were found in Minimum Retraction Group between UIP and Ls (p<0.01), Point A and Ss, UIP and Li, Point B and Si (p<0.05) than Minimum Retraction Group. 3. Correlations (p<0.01) were found between upper incisor retraction and posterior movement of the upper and lower lip in Thin Lip-Thickness Group, whereas no significant correlations were found in Thick Lip-Thickness Group. 4. Mean changes of the soft tissue thickness subsequent to incisor retraction were increased (p<0.01) in upper lip (Ls-Ls'), whereas no changes were found in lower lip.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.587-592
• /
• 1995

The purpose of this study was to observe the pattern of bone remodellings in the periodontal ligament of dog, in which experimental tooth movement was performed A control and 5 experimental dogs, one and half year in age, were studied. Light force (50-75g) was applied by placing open-coil spring between left mandibular premolars ; heavy force (250-300g), between right mandibular premolars. Experimental dogs were sacrificed at 12 hours, 1, 3 ,7 and 14 days after force application, respectively. And soft X-ray films were obtained and read on the sectioned periodontal tissue around mandibular premolars. The results were as follows. 1. New bone formation began to be observed in tension side at 7-day and increased at 14-day , No difference was observed between light force group and heavy force group. 2. Bone resorption was observed as a shape of destruction of lamina dura at 3-day and increased gradually at 7-day, 14-day.

• The korean journal of orthodontics
• /
• v.48 no.5
• /
• pp.304-315
• /
• 2018

Objective: The purpose of this study was to analyze initial displacement and stress distribution of the maxillofacial complex during dentoskeletal maxillary protraction with various appliance designs placed on the palatal region by using three-dimensional finite element analysis. Methods: Six models of maxillary protraction were developed: conventional facemask (Type A), facemask with dentoskeletal hybrid anchorage (Type B), facemask with a palatal plate (Type C), intraoral traction using a Class III palatal plate (Type D), facemask with a palatal plate combined with rapid maxillary expansion (RME; Type E), and Class III palatal plate intraoral traction with RME (Type F). In Types A, B, C, and D, maxillary protraction alone was performed, whereas in Types E and F, transverse expansion was performed simultaneously with maxillary protraction. Results: Type C displayed the greatest amount of anterior dentoskeletal displacement in the sagittal plane. Types A and B resulted in similar amounts of anterior displacement of all the maxillofacial landmarks. Type D showed little movement, but Type E with expansion and the palatal plate displayed a larger range of movement of the maxillofacial landmarks in all directions. Conclusions: The palatal plate served as an effective skeletal anchor for use with the facemask in maxillary protraction. In contrast, the intraoral use of Class III palatal plates showed minimal skeletal and dental effects in maxillary protraction. In addition, palatal expansion with the protraction force showed minimal effect on the forward movement of the maxillary complex.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.236-244
• /
• 2015

Objective: The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods: The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results: Mean maxillary 1st molar distalization was $2.3{\pm}1.1mm$, at a rate of $0.4{\pm}0.2mm/month$, and rotation was not significant. Intermolar width increased by $2.9{\pm}1.8mm$. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions: Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement.

• The korean journal of orthodontics
• /
• v.35 no.2 s.109
• /
• pp.153-161
• /
• 2005

Tooth movement facilitated by corticotomy and distraction osteoseresis was discussed. In this study, a portion of cortical bone which can provide resistance to tooth movement in alveolar bone was removed Active bone deposition was thor Possible in the tension side. Teeth moved at such a speedy rate as we could not imagine from conventional orthodontic treatment. which lead to the reduction of the total treatment Period Posterior movement of the canine or molar teeth was possible without any side effects such as anchorage loss, root resorption or Periodontal breakdown.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.42-52
• /
• 2022

Objective: This study compared soft tissue changes after extraction of the four premolars followed by maximum retraction of the anterior teeth according to the type of anterior teeth movement: tipping and translation. Methods: Patients who had undergone orthodontic treatment involving the extraction of four premolars were retrospectively selected and divided into either the tipping (n = 27) or translation (n = 26) groups based on the retraction of the incisor root apex and the axis changes of the incisors during the treatment period. Lateral pre- and post-treatment cephalograms were analyzed. Results: There were no significant differences between the tipping and translation groups before treatment. The retraction amounts of the root apex of the upper and lower incisors in the tipping group were 0.33 and 0.26 mm, respectively, and 5.02 and 5.31 mm, respectively, in the translation group (p < 0.001). The posterior movements of soft tissue points A and B in the tipping group were 0.61 and 1.25 mm, respectively, and 1.10 and 3.25 mm, respectively, in the translation group (p < 0.01). The mentolabial sulcus angle increased by 5.89° in the tipping group, whereas it decreased by 8.13° in the translation group (p < 0.001). Conclusions: An increased amount of retraction of the incisor root apex led to the increased posterior movement of soft tissue points A and B, and this appeared more distinct in cases involving the lower incisor and lower lip.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.23-34
• /
• 2023

Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment. Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37℃. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the "stressed" position in a 37℃ water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days. Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level. Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.223-248
• /
• 1987

The early tissue reactions in the periodontal tissues of the tension zones following the application of force (30gm) to the maxillary first molar teeth of the albino rats were studied by the light microscopy and electron microscopy The increase of periodontal fibroblasts was evident, particularly in 1 day survival period. Osteoblast differentiation and new bone formation on the alveolar bone surface were occurred from 1 day survival period. Mononuclear phagocytes occurred consistently and in relatively high number adjacent to and at some distance from blood vessel Extensive breakdown of collagen fibers was observed. The increase of the phagocytosis of collagen by the active fibroblasts was evident Also, collagen fibrils were sparse or lost near the macrophage.