정중이개란 상악 중절치 사이의 치간이개를 말한다. 이는 혼합 치열기에서 ugly ducking stage에 흔히 관찰할 수 있으며 일반적으로 견치가 맹출하면서 자연적으로 소실되므로 꼭 치료가 필요한 것은 아니다. 그러나 견치 맹출 후에도 정중이개가 2mm이하로 계속 존재하거나 견치 맹출 전이라도 3mm이상의 정중이개가 존재하는 경우에서는 치료의 적응증이 될 수 있다. 특히 후자의 경우 심미적인 면에서 뿐만 아니라, 이로 인해 측절치와 견치의 맹출공간이 부족해지는 문제가 발생하므로 교정치료가 권장된다. 정중이개 치료시 사용되는 장치물은 finger spring 등을 이용한 가철성 장치물과, 교정용 band, tube, bracket 등을 부착시켜 rubber elastics이나 coil spring 등을 사용하는 고정성 장치물로 나뉘어진다. 그러나 정중이개의 치료를 위해 rubber band를 band, tube, bracket 등과 같은 적절한 부가장치 없이 사용하면 rubber band가 치근은 따라 치은 하방으로 이동하게 되고 치주 인대를 파괴하며 치근단 부위에 이르러 치아동요, 치아정출 및 탈락 등 치아에 치명적인 손상을 입힐 수 있다. 본 증례는 정중이개의 치료를 위해 부적절하게 rubber band를 사용하여 외상을 받은 치아를 관찰하여 다소의 지견을 얻었기에 이를 보고하는 바이다.
Abdi, Amir Hossein;Motamedian, Saeed Reza;Balaghi, Ehsan;Nouri, Mahtab
대한치과교정학회지
/
제48권4호
/
pp.236-244
/
2018
Objective: The aim of this study is to compare the adaptation of a straight wire between brackets positioned at the mid-lingual surface and those placed gingivally by using a three-dimensional simulation software. Methods: This cross-sectional study was performed using OrthoAid, an in-house software. The subjects were 36 adolescents with normal Class I occlusion. For each dental cast, two bracket positioning approaches, namely the middle and gingival, were examined. In the middle group, the reference points were placed on the mid-lingual surface of each tooth, while in the gingival group, the reference points were positioned lingually on the anterior teeth. A 4th degree polynomial was adopted, and the in-plane and off-plane root mean squares (RMSs) of the distances between the reference points and the fitted polynomial curve were calculated using the software. Statistical analysis was performed using the paired-samples t-test (${\alpha}=0.05$). Results: The mean in-plane RMS of the polynomial curve to the bracket distance in the gingival group was significantly lower than that in the middle group (p < 0.001). The off-plane RMS was higher in the gingivally positioned brackets in the maxilla than in the middle group (p < 0.001). However, the off-plane RMS in mandible was not statistically significantly different between the two groups (p = 0.274). Conclusions: The results demonstrated that the gingival placement of lingual brackets on the anterior teeth could decrease the distance between a tooth and the straight wire.
Park, Kyung Hee;Bayome, Mohamed;Park, Jae Hyun;Lee, Jeong Woo;Baek, Seung-Hak;Kook, Yoon-Ah
대한치과교정학회지
/
제45권2호
/
pp.74-81
/
2015
Objective: The purposes of this study were 1) to classify lingual dental arch form types based on the lingual bracket points and 2) to provide a new lingual arch form template based on this classification for clinical application through the analysis of three-dimensional virtual models of normal occlusion sample. Methods: Maxillary and mandibular casts of 115 young adults with normal occlusion were scanned in their occluded positions and lingual bracket points were digitized on the virtual models by using Rapidform 2006 software. Sixty-eight cases (dataset 1) were used in K-means cluster analysis to classify arch forms with intercanine, interpremolar and intermolar widths and width/depth ratios as determinants. The best-fit curves of the mean arch forms were generated. The remaining cases (dataset 2) were mapped into the obtained clusters and a multivariate test was performed to assess the differences between the clusters. Results: Four-cluster classification demonstrated maximum inter-cluster distance. Wide, narrow, tapering, and ovoid types were described according to the intercanine and intermolar widths and their best-fit curves were depicted. No significant differences in arch depths existed among the clusters. Strong to moderate correlations were found between maxillary and mandibular arch widths. Conclusions: Lingual arch forms have been classified into 4 types based on their anterior and posterior dimensions. A template of the 4 arch forms has been depicted. Three-dimensional analysis of the lingual bracket points provides more accurate identification of arch form and, consequently, archwire selection.
The purpose of this study was to evaluate and compare the shear bond strengths and failure sites of metal brackets bonded with chemically cured adhesive and light-cured adhesive. 10 brackets were bonded on prepared enamel surfaces with $Transbond^{circledR}$ (Unitek/3M; U.S.A.) light-cured orthodontic adhesive and another 10 brackets were bonded with $Ortho-one^{\circledR}$ (Bisco:U.S.A.) chemically cured orthodontic adhesive. 24 hours after bonding, the Instron universal testing machine was used to measure the shear bond strengths. The failure sites were examined under streoscopic microscope. The results were as follows: 1 . The mean shear bond strength of metal brackets bonded with light-cured adhesive was lower than that of metal brackets bonded with chemically cured adhesive, but the difference was not statistically significant (p < 0.05). 2. Regardless of the type of adhesives, the brackets were failed primarily at the bracket base-adhesive interface. 3. Bonding of metal brackets with light-cured adhesive is considered to be clinically acceptable.
Objective: Bonding forces of brackets to enamel surfaces may be affected by the procedures used for bleaching and enamel etching. The aim of this study was to investigate the bonding strength of orthodontic brackets to laser-etched surfaces of bleached teeth. Methods: In a nonbleached control group, acid etching (group A) or Er:YAG laser application (group B) was performed prior to bracket bonding (n = 13 in each group). Similar surface treatments were performed at 1 day (groups C and D; n = 13 in each subgroup) or at 3 weeks (groups E and F; n = 13 in each subgroup) after 38% hydrogen peroxide bleaching in another set of teeth. The specimens were debonded after thermocycling. Results: Laser etching of bleached teeth resulted in clinically unacceptable low bonding strength. In the case of acid-etched teeth, waiting for 3 weeks before attachment of brackets to the bleached surfaces resulted in similar, but not identical, bond strength values as those obtained with nonbleached surfaces. However, in the laser-etched groups, the bonding strength after 3 weeks was the same as that for the nonbleached group. Conclusions: When teeth bleached with 38% hydrogen peroxide are meant to be bonded immediately, acid etching is preferable.
There are various types of localized tooth malpositions in the mixed dentition, such as abnormal tooth axis, anterior crossbite of some incisors, impaction, midline diastema, ectopic eruption, and so forth. We, Pediatric Dentists, have usually used removable appliances for these instances. But, removable orthodontic appliances, as is known, have marked limitations in some situations, for example, severe rotation, intrusion and extrusion, root torque, closure of large diastema, traction of impacted tooth, etc. In such cases, Whip spring, combined with fixed or removable appliance, can increase utilities of removable orthodontic appliances. The authors have applied whip springs to some cases showing localized positional and arrangement problems, and have witnessed the results as follows; 1. The refined and elaborate control of direction and magnitude of force by the operator, and accurate compliance of the patients were requisite for the treatment with it. 2. It showed special effectiveness for de rotation of incisors. Although it yields some benefit for root movement, the special consideration for incomplete roots in this age bracket was required. 3. In the localized malalignment cases in mixed dentition, uncurable with traditional removable appliances but practically unrealistic with fixed appliance therapy, the whip spring was thought to be a good alternative.
As an alternative to the conventional fixed appliance that uses orthodontic brackets, a simple round tube without a bonding base can be bonded to the tooth surface by covering the tube with flowable resin. In this technique, bent wires cannot be inserted into the simple tubes; therefore, repositioning of the simple tubes is often required for adjustments. To reduce repositioning of simple tubes, a dome-shaped resin covering of the simple tube can be designed with a customized in-and-out compensation, using three-dimensional computer-aided design software based on digital simulation of orthodontic tooth movement. In the present case, the use of simple tubes bonded with customized resin coverings in a Class I nonextraction case is described in a 17-year-old male, in whom moderate crowding of the anterior teeth was treated over an 8-month period. This case shows that simple tubes can be used as an alternative to brackets in some Class I nonextraction cases, with the potential benefit of reducing decalcification.
Crystal growth 용액인 황화이온을 함유한 폴리아크릴산 용액에 의한 법랑질 표면처리는 법랑질 표면에 crystal growth를 유도함으로써 통상적인 산부식법을 대체하여 교정용 브라켓을 접착하기 위한 법랑질 전처치의 방법으로 사용될 수 있음이 제안된 바 있다. 이 연구는 crystal growth후 교정용 브라켓 접착제로 브라켓을 접착하는 방법의 임상적용 가능성을 구명하기 위하여 시행되었다. 발거된 사람소구치의 법랑질 표면을 $25\%$ 폴리아크릴산과 0.3M 황산을 함유한 기본 crystal growth 용액, 각각 0.3M lithium sulfate, 0.3M magnesium sulfate, 0.3M potassium sulfate를 첨가한 crystal growth 용액, $37\%$ 인산용액, 퍼미스로 각각 처리한 후, 교정용 광중합형 글래스아이오노머 시멘트와 교정용 레진접착제로 금속브라켓을 접착하였다. $37^{\circ}C$의 증류수에 24시간 침지시킨 후, 브라켓 전단결합강도를 측정하고 접착 파절양태를 관찰하였으며 표면처리된 법랑질 표면과 브라켓 제거후의 법랑질 표면을 주사전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. Crystal growth후 광중합형 글래스아이오노머 시멘트로 브라켓 접착시 0.3M magnesium sulfate를 함유한 군의 브라켓 전단결합강도가 가장 높았다(p<0.01). Crystal growth후 광중합형 글래스아이오노머 시멘트로 접착한 군의 브라켓 전단결합강도는 crystal growth 후 레진접착제로 접착한 군보다 높았다(p<0.001). Magnesium sulfate, 또는 potassium sulfate를 함유한 crystal growth 용액으로 법랑질 표면을 처리한 후 글래스아이오노머시멘트로 접착한 군의 브라켓 전단결합강도는 산부식 후 레진 접착제로 접착한 군과 유의한 차이를 보이지 않았다. 브라켓 제거시 잔류접착제의 양은 글래스아이오노머 시멘트로 접착한 것이 가장 적었다. 이상의 결과는 magnesium sulfate나 potassium sulfate를 함유한 crystal growth 용액으로 법랑질 표면처리 후 교정용 광중합형 글래스 아이오노머 시멘트로 브라켓을 접착하는 방법이 통상적으로 사용되는 산부식 후 교정용 레진접착제에 의한 브라켓 접착법을 대체할 수 있음을 시사한다.
여러가지 교정장치 중에서 고정성 장치는 개개치아의 이동에 있어 가장 효과적으로 사용되는 장치이므로 그 작용기전과 역학적 관계를 이해하는 것이 중요하다. 고정성 장치의 탄선형태는 크게 continuous arch, segmented arch, sectional arch로 나누어 볼수있는데, segmented arch나 sectional arch는 힘의 작용점이 단순하고 interbracket distance도 길어 술자 임의대로 force system 조절이 가능한 반면 continuous arch에 서는 bracket geometry가 다양하고, interbracket distance가 좁아 force system의 조절이나 그 역학적 분석이 어려운게 사실이다. 저자는 공학에서의 3 dimensional elastic beam이 continuous arch의 형태와 유사한 점에 착안하여 continuous arch 의 force system을 분석하고자 하였으며, 이를 위해 다양한 형상을 갖는 3개의 bracket geometry를 표본형상으로 설정하고 기울기, 변위 및 interbracket distance에 따른 힘과 moment의 변화양상을 분석하고, 저자가 임의로 제작한 불규칙한 치아배열을 갖는 3차원 모형을 일례로하여 0.016 NiTi archwire를 bracket내에 삽입했을 때 발생되는 초기 힘과 moment를 분석 비교해본 결과 다음과 같은 결론을 얻었다. 1. Bracket의 변위 또는 기울기에 따라 나타나는 힘의 양상이 선형 대칭적인 비례관계를 보였다. 2. Interbracket distance에 따라 나타나는 힘의 양상은 비선형 대칭적인 반비례관계를 보였다. 3. 3차원 모형에서 bracket 형상이 비교적 단순한 부위에서는 표본형상과 비교분석이 가능했지만 인접치의 형상이 복잡한 부위에서는 표본형상의 예측량보다 힘이 크게 발생 되었다.나타나지 않았다. 하악의 arch length discrepancy는 하악 절치의 MD/FL index와, 상악의 arch length discrepancy는 측절치의 MD/FL index에서 상관관계를 나타내었다. 4. 정상군과 밀집군의 각 계측항목의 t-검정 결과 하악의 arch length discrepancy, overbite에서만 유의차를 나타내었다. 검사에서 Plaque Index(p<0.01)와 Gingival Index(p<0.001)가 상당히 낮은것으로 나타났다. 겔형 불화주석군에서 한 증례는 미미한 치관착색을, 두 증례는 보통정도의 치관착색을 보였다. 치아탈회 연구에서는 겔형 불화주석군과 불화나트륨 양치액군이 치료후 치아탈회값에서 치료전 치아탈회값을 뺀 치아탈회값이 대조군에 비해 구강전체및 제1대구치에서 현저하게 낮은 값(p<0.05)을 보였다. 비록 겔형 불화주석군이 불화나트륨 양치액군보다 일관되게 낮은 치아탈회값을 보였을지라도 통계적으로 그 차이는 단지 유의성을 보이는 정도였다.는 골기질의 주성분인 type I 교원질의 합성을 선택적으로 억제하는 기능과 alkaline phosphatase의 활성을 크게 증가시키지 못한 점 등으로 미루어 볼 때, 골개조를 억제하는 방향으로 작용한다고 볼 수 있으며, 교정치료 과정중 골개조를 억제하는 부위에서 사용을 시도해 볼 수 있겠다.>신뢰구간은 상악에서 정상교합군은 $79.5-81.0\%$, 비발치군은 $81.6-84.9\%$, 발치군은 $70.1-72.2\%$로 나타났으며, 하악에서 정상교합군은 $79.8-82.2\%$, 비발치군은 $82.1-85.5\%$, 발치군은 $73.1-75.1\%$로 나타났다. 7. 최대치아근원심폭경합, 기저악궁폭경, 기저악궁장경, 최대치아근원심폭경 합에 대한
The purpose of this article is to introduce a new virtual orthodontic treatment (VOT) system, which can be used to construct three-dimensional (3D) virtual models, establish a 3D virtual setup, enable the placement of the virtual brackets at the predetermined position, and fabricate the transfer jig with a customized bracket base for indirect bonding (IDB) using the stereolithographic technique. A 26-year-old woman presented with anterior openbite, crowding in the upper and lower arches, and narrow and tapered upper arch, despite having an acceptable profile and balanced facial proportion. The treatment plan was rapid palatal expansion (RPE) without extraction. After 10 days of RPE, sufficient space was obtained for decrowding. After a 10-week retention period, accurate pretreatment plaster models were obtained using silicone rubber impression. IDB was performed according to the protocol of the VOT system. Crowding of the upper and lower arches was effectively resolved, and anterior openbite was corrected to normal overbite. Superimposition of the 3D virtual setup models (3D-VSM) and post-treatment 3D virtual models showed that the latter deviated only slightly from the former. Thus, the use of the VOT system helped obtain an acceptable outcome in this case of mild crowding treated without extraction. More cases should be treated using this system, and the pre- and post-treatment virtual models should be compared to obtain feedback regarding the procedure; this will support doctors and dental laboratory technicians during the learning curve.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.