DOI QR코드

DOI QR Code

Orthodontic bonding to acid- or laser-etched prebleached enamel

  • Ozdemir, Fulya (Department of Orthodontics, Faculty of Dentistry, Yeditepe University) ;
  • Cakan, Umut (Department of Prosthodontics, Faculty of Dentistry, Istanbul Medipol University) ;
  • Gonul, Nese (Private Practice) ;
  • Cakan, Derya Germec (Department of Orthodontics, Faculty of Dentistry, Yeditepe University)
  • Received : 2012.09.24
  • Accepted : 2012.11.30
  • Published : 2013.06.25

Abstract

Objective: Bonding forces of brackets to enamel surfaces may be affected by the procedures used for bleaching and enamel etching. The aim of this study was to investigate the bonding strength of orthodontic brackets to laser-etched surfaces of bleached teeth. Methods: In a nonbleached control group, acid etching (group A) or Er:YAG laser application (group B) was performed prior to bracket bonding (n = 13 in each group). Similar surface treatments were performed at 1 day (groups C and D; n = 13 in each subgroup) or at 3 weeks (groups E and F; n = 13 in each subgroup) after 38% hydrogen peroxide bleaching in another set of teeth. The specimens were debonded after thermocycling. Results: Laser etching of bleached teeth resulted in clinically unacceptable low bonding strength. In the case of acid-etched teeth, waiting for 3 weeks before attachment of brackets to the bleached surfaces resulted in similar, but not identical, bond strength values as those obtained with nonbleached surfaces. However, in the laser-etched groups, the bonding strength after 3 weeks was the same as that for the nonbleached group. Conclusions: When teeth bleached with 38% hydrogen peroxide are meant to be bonded immediately, acid etching is preferable.

Keywords

References

  1. Titley K, Torneck CD, Smith DC. Effect of concentrated hydrogen peroxide solution on the surface morphology of cut human dentin. Endod Dent Traumatol 1988;4:32-6. https://doi.org/10.1111/j.1600-9657.1988.tb00290.x
  2. Cavalli V, Arrais CA, Giannini M, Ambrosano GM. High-concentrated carbamide peroxide bleaching agents effects on enamel surface. J Oral Rehabil 2004;31:155-9. https://doi.org/10.1111/j.1365-2842.2004.01138.x
  3. Patusco VC, Montenegro G, Lenza MA, Alves de Carvalho A. Bond strength of metallic brackets after dental bleaching. Angle Orthod 2009;79:122-6. https://doi.org/10.2319/072507-345.1
  4. McCracken MS, Haywood VB. Demineralization effects of 10 percent carbamide peroxide. J Dent 1996;24:395-8. https://doi.org/10.1016/0300-5712(95)00113-1
  5. Hegedus C, Bistey T, Flora-Nagy E, Keszthelyi G, Jenei A. An atomic force microscopy study on the effect of bleaching agents on enamel surface. J Dent 1999;27:509-15. https://doi.org/10.1016/S0300-5712(99)00006-8
  6. Rueggeberg FA, Margeson DH. The effect of oxygen inhibition on an unfilled/filled composite system. J Dent Res 1990;69:1652-8. https://doi.org/10.1177/00220345900690100501
  7. Kalili T, Caputo AA, Mito R, Sperbeck G, Matyas J. In vitro toothbrush abrasion and bond strength of bleached enamel. Pract Periodontics Aesthet Dent 1991;3:22-4.
  8. Titley KC, Torneck CD, Smith DC, Chernecky R, Adibfar A. Scanning electron microscopy observations on the penetration and structure of resin tags in bleached and unbleached bovine enamel. J Endod 1991;17:72-5. https://doi.org/10.1016/S0099-2399(06)81611-0
  9. Dishman MV, Covey DA, Baughan LW. The effects of peroxide bleaching on composite to enamel bond strength. Dent Mater 1994;10:33-6. https://doi.org/10.1016/0109-5641(94)90019-1
  10. Cvitko E, Denehy GE, Swift EJ Jr, Pires JA. Bond strength of composite resin to enamel bleached with carbamide peroxide. J Esthet Dent 1991;3:100-2. https://doi.org/10.1111/j.1708-8240.1991.tb00976.x
  11. Uysal T, Sisman A. Can previously bleached teeth be bonded safely using self-etching primer systems? Angle Orthod 2008;78:711-5. https://doi.org/10.2319/0003-3219(2008)078[0711:CPBTBB]2.0.CO;2
  12. Bulut H, Kaya AD, Turkun M. Tensile bond strength of brackets after antioxidant treatment on bleached teeth. Eur J Orthod 2005;27:466-71. https://doi.org/10.1093/ejo/cji044
  13. Sung EC, Chan SM, Mito R, Caputo AA. Effect of carbamide peroxide bleaching on the shear bond strength of composite to dental bonding agent enhanced enamel. J Prosthet Dent 1999;82:595-9. https://doi.org/10.1016/S0022-3913(99)70060-0
  14. Barghi N, Godwin JM. Reducing the adverse effect of bleaching on composite-enamel bond. J Esthet Dent 1994;6:157-61. https://doi.org/10.1111/j.1708-8240.1994.tb00852.x
  15. Lee BS, Hsieh TT, Lee YL, Lan WH, Hsu YJ, Wen PH, et al. Bond strengths of orthodontic bracket after acid-etched, Er:YAG laser-irradiated and combined treatment on enamel surface. Angle Orthod 2003; 73:565-70.
  16. Gokcelik A, Ozel Y, Ozel E, Arhun N, Attar N, Firatli S, et al. The influence of Er:YAG laser conditioning versus self-etching adhesives with acid etching on the shear bond strength of orthodontic brackets. Photomed Laser Surg 2007;25:508-12. https://doi.org/10.1089/pho.2007.2096
  17. Berk N, Başaran G, Ozer T. Comparison of sandblasting, laser irradiation, and conventional acid etching for orthodontic bonding of molar tubes. Eur J Orthod 2008;30:183-9. https://doi.org/10.1093/ejo/cjm103
  18. von Fraunhofer JA, Allen DJ, Orbell GM. Laser etching of enamel for direct bonding. Angle Orthod 1993;63:73-6.
  19. Martinez-Insua A, Da Silva Dominguez L, Rivera FG, Santana-Penin UA. Differences in bonding to acidetched or Er:YAG-laser-treated enamel and dentin surfaces. J Prosthet Dent 2000;84:280-8. https://doi.org/10.1067/mpr.2000.108600
  20. Usumez S, Orhan M, Usumez A. Laser etching of enamel for direct bonding with an Er,Cr:YSGG hydrokinetic laser system. Am J Orthod Dentofacial Orthop 2002;122:649-56. https://doi.org/10.1067/mod.2002.127294
  21. Mullins JM, Kao EC, Martin CA, Gunel E, Ngan P. Tooth whitening effects on bracket bond strength in vivo. Angle Orthod 2009;79:777-83. https://doi.org/10.2319/042308-226.1
  22. Torneck CD, Titley KC, Smith DC, Adibfar A. The influence of time of hydrogen peroxide exposure on the adhesion of composite resin to bleached bovine enamel. J Endod 1990;16:123-8. https://doi.org/10.1016/S0099-2399(06)81588-8
  23. Titley KC, Torneck CD, Ruse ND, Krmec D. Adhesion of a resin composite to bleached and unbleached human enamel. J Endod 1993;19:112-5. https://doi.org/10.1016/S0099-2399(06)80504-2
  24. Cavalli V, Reis AF, Giannini M, Ambrosano GM. The effect of elapsed time following bleaching on enamel bond strength of resin composite. Oper Dent 2001;26:597-602.
  25. Turkkahraman H, Adanir N, Gungor AY. Bleaching and desensitizer application effects on shear bond strengths of orthodontic brackets. Angle Orthod 2007;77:489-93. https://doi.org/10.2319/0003-3219(2007)077[0489:BADAEO]2.0.CO;2
  26. Abe R, Endo T, Shimooka S. Effects of tooth bleaching on shear bond strength of brackets rebonded with a self-etching adhesive system. Odontology 2011;99:83-7. https://doi.org/10.1007/s10266-010-0138-z
  27. Uysal T, Basciftci FA, Uşümez S, Sari Z, Buyukerkmen A. Can previously bleached teeth be bonded safely? Am J Orthod Dentofacial Orthop 2003;123: 628-32. https://doi.org/10.1016/S0889-5406(03)00151-3
  28. Cecchini RC, Zezell DM, de Oliveira E, de Freitas PM, Eduardo Cde P. Effect of Er:YAG laser on enamel acid resistance: morphological and atomic spectrometry analysis. Lasers Surg Med 2005;37: 366-72. https://doi.org/10.1002/lsm.20247
  29. Basaran G, Ozer T, Berk N, Hamamci O. Etching enamel for orthodontics with an erbium, chromium: yttrium-scandium-gallium-garnet laser system. Angle Orthod 2007;77:117-23. https://doi.org/10.2319/120605-426R.1
  30. Ozer T, Basaran G, Berk N. Laser etching of enamel for orthodontic bonding. Am J Orthod Dentofacial Orthop 2008;134:193-7. https://doi.org/10.1016/j.ajodo.2006.04.055
  31. Bishara SE, Gordan VV, VonWald L, Jakobsen JR. Shear bond strength of composite, glass ionomer, and acidic primer adhesive systems. Am J Orthod Dentofacial Orthop 1999;115:24-8. https://doi.org/10.1016/S0889-5406(99)70312-4
  32. Maijer R, Smith DC. A new surface treatment for bonding. J Biomed Mater Res 1979;13:975-85. https://doi.org/10.1002/jbm.820130614

Cited by

  1. Bond strengths of brackets bonded to enamel surfaces conditioned with femtosecond and Er:YAG laser systems vol.31, pp.6, 2013, https://doi.org/10.1007/s10103-016-1961-4
  2. Effect of enamel sealants on tooth bleaching and on the color stability of the result vol.105, pp.2, 2013, https://doi.org/10.1007/s10266-016-0253-6
  3. Effect of enamel surface pretreatment with different laser types and antioxidizing agents office-bleaching on the shear bond strength of orthodontic brackets vol.30, pp.6, 2020, https://doi.org/10.1088/1555-6611/ab8a50
  4. Effect of different bleaching treatment protocols on shear bond strength of bonded orthodontic brackets with no-primer adhesive resin vol.10, pp.1, 2013, https://doi.org/10.4103/jos.jos_5_19