• Korean Journal of Culture and Social Issue
• /
• v.21 no.2
• /
• pp.279-297
• /
• 2015

The present study examined whether individuals would respond differently, as a function of cultural self-orientations, when their requests were rejected. Also examined was whether individuals with different cultural self-orientations would predict differently how their interaction partner would respond when they rejected his or her request. Furthermore, it was investigated whether experimentally induced perspective-taking would influence responses to rejection and predictions of responses to rejection. It was found that responses to rejection as well as predictions of responses to rejection varied as a function of individual's independent self-orientation and perspective-taking. However, no significant effects were found with regard to interdependent self-orientation. Based on these results, the implications that cultural self-orientations have for request rejection and social behavior in general are discussed, and future directions are suggested.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.129-143
• /
• 2007

We have studied orientational characteristics of microcracks in Mesozoic granites and granitic dyke rocks from Seokmo-do, Ganghwa-gun. Microcracks on horizontal surfaces of rock samples from 14 sites were investigated by image processing. Orientations of these microcracks compared with those of 18 sets of joints in Mesozoic granites from Seokmo-do. From the related chart, microcrack sets show strong preferred orientations which obviously are coincident with the direction of vertical common joints. It follows that the formation of macroscopic joints may be the results of further growth and step-wise jointing of pre-existing microcracks. Orientations of microcracks from this result also compared with those of vertical rift and grain planes for Jurassic and Cretaceous granite quarries in Korea. As shown in the distribution chart, the congruence of distribution pattern among microcracks and rift and grain planes suggests that similar microcrack systems probably occur regionally in Jurassic and Cretaceous granites from Korea. In particular, whole domain of the distribution chart was divided into 16 groups in terms of the phases of distribution of microcracks and planes. These microcrack sets in each domains construct complex composite microcrack systems which have formed progressively by different geologic processes and under varying conditions.

• Journal of Distribution Science
• /
• v.11 no.10
• /
• pp.37-45
• /
• 2013

Purpose - Appropriate response to the fast changing economic environment determines SMEs' competiveness in the era of globalization and open market and, therefore, government policies to strengthen SME's competitiveness will be very important in the future. It is time to investigate the element of strategic orientation that is necessary for strengthening the competitiveness of SMEs, and its effect on the success of a business start-up. This study analyzes the network orientation in addition to existing strategic orientation, and focuses on price and quality management capability as mediators for strategic orientation and outcomes of business start-ups. Research design/data/methodology - The orientations of technology-based business founders were classified into market, technology, network, and entrepreneurial orientation. We then investigated the effect of these orientations on product price and quality management capability, as well as the influence of price and quality management capability on the outcome of a business start-up. This study is based on the nation-wide survey of the founders and members of technology-based business establishments. The survey was administered to 300 selected companies via email for a period of one month, at the end of which 175 companies replied with valid answers. Further, for effective and objective research, we used SPSS 14.0 and Amos 7.0 for structural equation modeling assumptions and hypothesis verification. Results - Except for entrepreneurial orientation, the other three orientations, namely, technology, market, and network orientations, affect the price management capability according to our results. The price management capability relates significantly with the sales and customer satisfaction. Especially, technology orientation is the core competency of start-ups that affects price and quality management capabilities. However, technology and entrepreneurial orientation do not influence the outcome of business start-ups, but affect their quality management capabilities. Conclusions - This study confirms that the strategic orientation affects product price as well as quality management capabilities, to introduce new products and achieve successful outcomes. In conclusion, new business founders face the dilemma of trade-off between price and quality in the planning stage of new product development. In particular, price management capability directly affects the outcome. Therefore, price management is more important for a successful start-up than quality management. Especially, during the initial stages of starting up a new business, price management capability entails following the market-leading company, or price penetration strategy. In this stage, price management is dependent on the information from outside rather than on the founder's decision, and it directly affects sales performance and customer satisfaction. In contrast, quality management capability is directly related to the technology capability and market experience of founders. In this case, subjective and proactive decision making is required for differentiation and development of demand in the niche market, which does not directly influence the sales performance and customer satisfaction.

• The Journal of Engineering Geology
• /
• v.8 no.1
• /
• pp.75-86
• /
• 1998

Eighteen oriented samples from the Jeongsun limestone of the Joseon Supergroup are collected. The orientations of C-axis of calcite and e twin plane, the average thickness, numbers of twins and the widths of calcite grains in 10 samples are measured. Then, the twin strain, mean width, intensity of twin and relative magnitude and orientations of principal stresses are calculated using Calcite Strain Gauge program. Twin strain, mean width and intensitv rainge between 0.801%~10.927%, $0.43{\mu\textrm{m}}~2.03{\mu\textrm{m}}$, and 33.5~113.4twim/mm, respectively. Metamorphic temperatures calculated from twin show below $70^{\circ}C$, indicating that twins were developed within 2.3km depth. In five samples, two events with different orientations of principal stress produced calcite twins, while only one event produced calcite twins in five samples. The direction of the maximum stress is almost horizontal and the minimum is almost vertical, indicating that the stress regirne is identical with thrust fault. E-W and NW-SE are the most dominant directions of comressive stress and N-S and NE-SW directions are also shown. Comparision between paleostress orientations measured in the study and others indicates that the maximum horizontal stress oriented to E-W may represent the paleostress of period either from the Silurian to the Triassic or from the Silulian to the Permian. Paleostress oriented to NW-SE may be the major direction of stress during the Daeho orogeny.

• The KIPS Transactions:PartB
• /
• v.14B no.6
• /
• pp.453-460
• /
• 2007

In this paper, we present a method to extract the text lines in poorly structured documents. The text lines may have different orientations, considerably curved shapes, and there are possibly a few wide inter-word gaps in a text line. Those text lines can be found in posters, blocks of addresses, artistic documents. Our method based on the traditional perceptual grouping but we develop novel solutions to overcome the problems of insufficient seed points and vaned orientations un a single line. In this paper, we assume that text lines contained tone connected components, in which each connected components is a set of black pixels within a letter, or some touched letters. In our scheme, the connected components closer than an iteratively incremented threshold will make together a chain. Elongate chains are identified as the seed chains of lines. Then the seed chains are extended to the left and the right regarding the local orientations. The local orientations will be reevaluated at each side of the chains when it is extended. By this process, all text lines are finally constructed. The proposed method is good for extraction of the considerably curved text lines from logos and slogans in our experiment; 98% and 94% for the straight-line extraction and the curved-line extraction, respectively.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.13-26
• /
• 2022

Calcite twins were analyzed in six oriented samples of the Pungchon limestone, Joseon Supergroup, to reconstruct the paleostress field. The orientations of c-axis of calcite and e twin plane were measured along with the average thickness and numbers of twins, and the widths of calcite grains. Twin strain, mean width, and intensity of twinning, and the relative magnitude and orientations of principal stresses were calculated using Calcite Strain Gauge program. Twin strain, mean width, and intensity of twinning showed ranges of 1.09-15.36%, 0.53-3.72 ㎛ and 21.0-53.1 twim/mm, respectively. Metamorphic temperatures calculated from the twins were 170-200℃, indicating that the twins developed after the Pungchon limestone was uplifted to at least half of the maximum burial depth. Results for five of the samples indicate that the calcite twins formed during two events with principal stress axes of different orientations, while the remaining sample recorded only one event that produced calcite twins. The axis of maximum compressive stress was oriented mainly WNW-ESE to ENE-WSW, and to a lesser degree NW-SE and NE-SW. Comparison of paleostress orientations measured here and in other studies indicates that most twins were produced during the Songrim orogeny. However, the Daebo orogeny and the Bulguksa orogeny also produced calcite twins in the Punchon limestone.

• Asia Marketing Journal
• /
• v.9 no.1
• /
• pp.73-102
• /
• 2007

The paper aims to examine the relationships among a company's design, brand, and reputation orientations. DBR (Design, Brand, Reputation) have been regarded as invisible growth engines for companies and draws a lot of interests among Brand, PR and IR mangers recently. We have tested 3 hypotheses and have developed a relationship mechanism how to develop those three key intangible marketing assets. We have conducted 131 interviews with company managers who are involved in DBR activities, used Structural Equation Model (SEM) to estimate those relationships. It was found that a company's design orientation influenced the company's brand orientation positively and this brand one influenced reputation orientations consequently. However, design orientation does not show any significant relationship with a company's reputation orientations. Thus, there is a D->B >R chain mechanism concerning these 3 intangible marketing assets. Finally, the implications of this study and suggestions of further studies are discussed.

• Information Systems Review
• /
• v.18 no.4
• /
• pp.43-67
• /
• 2016

Although many studies have stressed the importance of technology in service innovation, the roles of technology in service innovation are at the center of debates in the service innovation literature. One major research stream regards technology as a trigger for other innovation based on resource advantage theory. Conversely, another major stream considers it as an enabler of other innovations based on complementary theory. The contradictory situation induces the necessity to better understand the role of technology in service innovation. Therefore, this study aims to identify the role of technology in service innovation. This study investigates the role of technology in service innovation based on a service innovation orientation framework. Four service innovation orientations (i.e., service creation, service delivery, customer interaction, and technology) are identified on the basis of Den Hertog's 4D model. This study proposes a research model that examines the indirect effect of technology orientation on innovation performance through the service creation and service delivery orientations, and the effect of technology orientation on firm performance as a moderator between customer interaction orientation and firm performance. Based on empirical data from 193 knowledge-intensive business service firms in Korea, we explain the role of technology in service innovation. The results indicate that technology orientation influences both service creation and service delivery orientations as an antecedent but customer interaction orientation as an enabler. The three service innovation orientations, which are directly and indirectly influenced by technology orientation, positively affect firm performance. The findings also show that the role of technology is different depending on the type of service innovation orientation in this study.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2007.11a
• /
• pp.29-29
• /
• 2007

• Journal of the Korean Statistical Society
• /
• v.16 no.2
• /
• pp.55-70
• /
• 1987

The principal components regression is one of the substitues for least squares method when there exists multicollinearity in the multiple linear regression model. It is observed graphically that the performance of the principal components regression is strongly dependent upon the values of the parameters. Accordingly, a new deletion criterion which determines proper principal components to be deleted from the analysis is developed and its usefulness is checked by simulations.