• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.16-22
• /
• 1999

In this paper, an efficient algorithm for estimating real edge locations to subpixel values is described. Digital images are acquired by projection into image plane and sampling process. However, most of real edge locations are lost in this process, which causes low measurement accuracy. For accurate measurement, we propose an algorithm which estimates the real boundary between two adjacent pixels in digital imagery, with subpixel accuracy. We first define 1D edge operator based on the moment invariant. To extend it to 2D data, the edge orientation of each pixel is estimated by the LSE(Least Squares Error)line/circle fitting of a set of pixels around edge boundary. Then, using the pixels along the line perpendicular to the estimated edge orientation the real boundary is calculated with subpixel accuracy. Experimental results using real images show that the proposed method is robust in local noise, while maintaining low measurement error.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.591-595
• /
• 2000

In this paper color coordinate system transformation based visual servo controller has been considered Mobile robot always has a position error and an orientation error resulted from wheel slipping etc.. Even more, the errors have accumulative properties. So feedback from environments is important. In this paper by using color model faster land mark extraction can be achieved. And the global position and the orientation of mobile robot can be known by only two land mark positions in image coordinate system. Finally, the adoption of visual information in path tracking problem makes visual servo control.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.401-407
• /
• 2019

In this paper, the position estimation considering wheel slip of mecanum wheeled mobile robots is discussed. Since the mecanum wheeled mobile robot does not need a space to rotate, it is very suitable in narrow industrial fields. However, the slip caused by the roller attached to the wheel makes it difficult to estimate the position precisely. Due to these limitations, mecanum wheels are rarely applied to unmanned mobile robots in automation factories. In this paper, a method to compensate the orientation and distance error caused by the slip is proposed. The exact orientation is measured by fusing gyro and magnetometer sensor data with application of Kalman filter. In addition, the kinematic model accounting slip effects will be defined to compensate the distance error.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.80-85
• /
• 2006

In an effort to reduce the evaluation time of the precision of manufactured disk cams, an effective measuring method with an exclusively built profile-measuring machine and subsequent data analysis procedure is proposed. The design and measuring data are interpolated by cubic spline curves to compute the precision error which is defined by the maximum and minimum distances between two curves. The minimum zone criterion of ISO is employed to evaluate the form error, and genetic algorithm is used to search the orientation and location of design data for the measured data which minimizes the form error. The proposed system was applied to marine engine cams, and it shows that the form error is reduced to 30% down compared with the method which minimizes the form error with the assumption that the centers of measured data design cam curve are identical.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.410-413
• /
• 1993

Chamferless peg-in-hole process of the cylindrical type parts using force/torque sensor and vision sensor is analyzed and simulated in this paper. Peg-in-hole process is classified to the normal mode (only position error) and tilted mode(position and orientation error). The tilted mode is sub-classified to the small and the big tilted mode according to the relative orientation error. Since the big tilted node happened very rare, most papers dealt with only the normal or the small tilted mode. But the most errors of the peg-in-hole process happened in the big tilted mode. This problem is analyzed and simulated in this paper using the force/torque sensor and vision senor. In the normal mode, fuzzy logic is introduced to combine the data of the force/torque sensor and vision sensor. Also the whole processing algorithms and simulations are presented.

• 전자공학회논문지SC
• /
• 제47권6호
• /
• pp.80-85
• /
• 2010

현재 BGA 409 chip의 외관검사는 대부분 현미경을 이용한 육안검사로 이루어지고 있다. 그러나 인간의 시력에 의존하여 검사하는 현재의 외관검사 방법은 검사자의 육체적, 정신적 부분에 의하여 검사 결과가 변화하기 때문에 안정적인 결과를 기대하기 어렵다. 따라서 육안검사 시 발생하는 문제점을 개선하기 위해 BGA 솔더볼 외관검사의 비전 시스템이 개발 되었고, 이는 기존의 검사 방법에 비해 BGA 409 chip의 솔더볼의 외관검사의 신뢰성과 효율성을 증가시켰다. 하지만 BGA 솔더볼의 크기가 미세하고 그 특징의 구분이 힘들어 검사의 정확도가 떨어지고 오리엔테이션 오류가 발생하였다. 이에 본 논문에서는 BGA 솔더볼 외관검사의 정확도를 향상시키기 위해 에지 검출 알고리즘의 보완과 특징들만을 비교하는 패턴매칭 기법을 제안하였으며, 또한 특징 공간 설정의 기준이 되는 기준 영역의 개선을 통해 오리엔테이션 오류의 개선을 제안하였다. 즉, 본 논문에서는 기존의 비전 시스템의 정확도와 오리엔테이션 오류를 개선하는 방법을 제안함으로써 BGA 솔더볼 외관검사의 정확도를 향상시켜 결과적으로 BGA 솔더볼 외관검사의 에러율을 줄이고 검사 속도의 향상 등 기존의 외관검사 방법에 비해 향상된 검사 결과를 획득하였다.

• Journal of Astronomy and Space Sciences
• /
• 제19권4호
• /
• pp.351-366
• /
• 2002

본 연구에서는 저가의 INS와 GPS 정보를 합성하여 고기동 환경에서 항체의 위치와 자세정보를 연속적으로 제공할 수 있는 약결합 방식의 통합 알고리즘을 구현하였고, 4S-Van에 장착된 이미지 센서의 위치와 자세결정 방법에 사용하였다. (D)GPS/INS 통합을 실시하기 전 IMU의 초기 정렬과정에서 방위각은 두 대의 GPS를 통해 결정하였으며 칼만 필터를 이용한 정밀정렬을 수행하였다. 통합 알고리즘의 성능평가를 위해 차량 테스트와 시뮬레이션 테스트를 병행하였다. 통합 결과 차량 시험을 기준으로 나타난 위치 오차는 직선도로에서 l0cm 내외의 정확도를 보이며 자세오차의 경우 시뮬레이션을 기준으로 롤각은 $0^{\circ}.01$, 피치각은 $0^{\circ}.03$, 요각은 $0^{\circ}.1$ 내외의 정확도를 보였다. 구현된 (D)GPS/INS 알고리즘은 기하보정 방법을 통해 이미지센서의 위치와 자세정보 제공자로서 활용될 수 있다. 따라서 4S-Van에 장착된 이미지 센서의 영상획득 시각에 대한 기하학적인 정보를 통해 지상의 건물이나 도로 시설물 등에 대한 3차원 공간 자료 구축이 가능하다고 보며, 구축된 정보를 통해 기존의 수치지도 갱신, 도로 시설물 관리, 비디오 GIS 데이터 베이스 구축 등에 대한 공간 자료 연계 및 응용에 활용할 계획이다.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.87-92
• /
• 2001

An error analysis is very important for a precision machine to estimate its performances. This study proposes a new parallel device, cubic parallel manipulator. Errors of the proposed cubic parallel manipulator include upper and down universal joint errors, due to the directional changes in the forces in the links, and actuation errors. An error analysis is presented based on an error model formed through the relation between the universal joint errors of the cubic parallel manipulator and the end effector accuracy. The analysis shows that the method can be used in predicting the accuracy of other cubic parallel devices.

• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.45-50
• /
• 2003

In any rapid prototyping process, the layer by layer building process introduces an area error between the staircase and the surface line specified by the computer-aided design model. This affects the dimensional accuracy as well as the surface finish for different Road Widths. This paper describes a methodology for computing the area error for any Road Width by the fused deposition modelling system. This technique can be applied to determine the best Road Width of the part, based on the minimum area error. This technique is verified by comparing the results with the experimental measurements of the area error with Road Widths.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.397-401
• /
• 1997

An error analysis is very important for a precision machine to estimate its performances. This study deals with error of a new parallel device, cubic parallel manipulator. There are so many error sources in this mechanism. Errors of the cubic parallel device vary depending on the stiffness of the manipulator. The stiffness of each link depends on the directions of the link and actuation force. In this paper, the stiffness of the manipulator is calculated by ARAQUS and the position and orlentation errors are predicted within a given workspace. The analysis shows that the method can be used in predicting the accuracy of other parallel devices and in designing parallel devices.