• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.793-796
• /
• 2005

A structure and a design of device were developed to fabricate large-scale active matrix organic light-emitting diode (AMOLED) display with good color purity and high aperture ratio. With these technologies, we developed a full color 14.1 inch WXGA AMOLED display. For the integration of OLED on an active matrix a-Si TFT backplane, an efficient top emission OLED is essential since the TFT circuitry covers a large position of the pixel aperture. These technologies will enable up the OLED applications to larger size displays such as desktop monitors and TVs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.589-593
• /
• 2005

It is well known that proper encapsulation is crucial for the lifetime of organic light emitting diode (OLED) displays. With the development of increasingly better barrier coatings and perimeter seals, it has now become very desirable to be able to precisely measure the rate of water vapor and oxygen permeation through barrier coatings and perimeter sealing. This paper demonstrates a new permeation measurement method that uses tritium-containing water (HTO) as a tracer material. The theoretical detection limit of this direct method is $2.4{\times}10^{-8}g/(m^2day)$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.81-84
• /
• 2003

Conductive polyaniline(PANI)-camphosulfonic acid (CSA) film applied as a hole injection layer in ITO/PANI/P3HT/LiF/Al device. In the AFM images, electrochemically polymerized PANI-CSA films have the small particles and smooth sufficient for application as hole injection layer. By insertion of PANI-CSA buffer layer, the turn on voltage of ITO/PANI/P3HT/LiF/Al device lowed by 3V, whereas that of ITO/P3HT/LiF/Al device shows 5V.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.3 s.12
• /
• pp.17-22
• /
• 2005

LED lamp was designed by the serial-parallel integration of LED chips in metal-interconnection. The 7 $4.5{\times}4.5\;in^{2}$ masks were designed with the contact type of chrome-no mirror?dark. The white epitaxial thin film was grown by metal-organic chemical vapor deposition. The active layers were consisted with the serial order of multi-quantum wells for blue, green and red lights. The fabricated LED chip showed the electroluminescence peaked at 450, 560 and 600 nm. For the current injection of 20 mA, the operating voltage was measured to 4.25 V and the optical emission power was obtained to 0.7 $\mu$W.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.259-264
• /
• 2006

ITO 투명전도막은 현재 FPD(flat panel display)소자의 전극으로 사용되고 있다. 특히 근래에 많은 연구가 진행되고 있는 유기발광다이오드(organic light emitting diode: OLED) 소자의 제작에 투명전도막으로 많은 응용이 되고 있다. ITO 를 이용한 디스플레이 소자는 ITO 의 계면 상태와 전기적 특성에 따라 그 특성이 크게 변한다. 본 연구에서는 $O_2$ 플라즈마 처리를 통하여 ITO 투명전도막의 전기적 특성 및 표면상태의 변화에 대하여 조사하고, 이러한 특성 변화에 따라 현재 많은 연구가 진행되고 있는 OLED 소자의 제작에 응용하기 위하여 유기용액을 이용한 접촉각 측정을 통하여 $O_2$ 플라즈마 처리에 따른 ITO 투명전도막과 유기용액의 접착력에 대하여 고찰하였다.

• Applied Science and Convergence Technology
• /
• v.23 no.3
• /
• pp.139-144
• /
• 2014

GaN deposition equipment and processes for the fabrication of white LEDs (Light Emitting Diode) using MOCVD (Metal Organic Chemical Vapor Deposition) were numerically modeled to analyze the effects of a reactive gas introduction strategy. The source gases, TMGa and $NH_3$, were injected from a shower head at the top of the chamber; the carrier gases, $H_2$ or $N_2$, were introduced using two types of injection structures: vertical and horizontal. Wafers sat on the holder at a radial distance between 100 mm and 150 mm. The non-uniformity of the deposition rates for vertical and horizontal injection were 4.3% and 3.1%, respectively. In the case of using $H_2$ as a carrier gas instead of $N_2$, the uniform deposition zone was increased by 20%.

• Journal of Information Display
• /
• v.12 no.2
• /
• pp.85-87
• /
• 2011

The contrast ratio is one of the most important performance parameters for display devices. The general method of measuring the contrast ratio is to determine the ratio of the full-screen white pattern to the full-screen black pattern, according to the Video Electronics Standards Association standard. Real TV images seldom have these images, however, and the conventional method does not reflect the true performance of the display in actual use. In this paper, a new contrast ratio measurement method that uses image patterns is proposed, to demonstrate that active matrix organic light-emitting diode TVs have a higher contrast than LED (LCD) TVs.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.106-107
• /
• 2011

Organic Light Emitting Diode(OLED), Optical Photovotaic Device(OPV)와 같은 유기소자에서 전극으로 적용되어지고 있는 Indium Tin Oxide (ITO) 박막의 유연성을 향상시키기 위하여 중간층으로 투명도(~80%)와 전도도(~1000 S/cm)가 우수한 PEDOT:PSS(PH1000)을 적용하였다. PEDOT:PSS(PH1000)의 적용으로 인하여 ITO 박막의 유연성이 현저히 개선됨과 동시에 PEDOT:PSS(PH1000)의 우수한 전도도로 인하여 보다 얇은 ITO의 두께에서도 우수한 면 저항(25 ${\Omega}/{\square}$ ~ 220 ${\Omega}/{\square}$) 및 비저항(3.75E-4 ${\Omega}{\cdot}cm$ ~ 4.40E-4 ${\Omega}{\cdot}cm$)의 값을 측정하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.141-145
• /
• 2021

The brightness of the Organic Light Emitting Diode (OLED) display is controlled by thin-film transistors (TFTs). Regardless of the materials and the structures of TFTs, an OLED suffers from the instable threshold voltage (V_th) of a TFT during operation. When designing an OLED pixel with circuit simulation tool such as SPICE, a designer needs to take V_th shift into account to improve the reliability of the circuit and various compensation methods have been proposed. In this paper, the effect of the compensation circuits from two typical OLED pixel circuits proposed in the literature are studied by the transient simulation with a SPICE tool in which the stretched-exponential time dependent V_th shift function is implemented. The simulation results show that the compensation circuits improve the reliability at the beginning of each frame, but V_th shifts from all TFTs in a pixel need to be considered to improve long-time reliability.

• Electronics and Telecommunications Trends
• /
• v.38 no.1
• /
• pp.26-35
• /
• 2023

Inkjet printing is a typical printing technology with many advantages, such as material cost reduction, noncontact pattern formation without a mask, and process simplification. With the recent and rapid development of ink materials, parts and equipment, and process technologies related to inkjet printing, it is becoming a major process in various areas of the display industry. In particular, for the QD-OLED (quantum dot-organic light-emitting diode) display announced by Samsung Display in 2022, quantum dot pixel production by applying inkjet printing is a key technology. We analyze inkjet printing technology for mass production applied to the display industry and discuss the technology development trends in academia and industry toward the realization of next-generation displays.