• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.547-553
• /
• 2013

Zirconium oxide ($ZrO_2$) nano porous membranes were fabricated by electrochemical two-step anodization with an electropolished zirconium substrate in inorganic water-based and organic electrolyte systems containing small amounts of fluoride. Using two-step anodization and organic electrolytes, highly regular and ordered nanotubular $ZrO_2$ oxide layers can be compared with aqueous electrolytes. The morphology and size of the nano porous layers were characterized by FE-SEM (field emission scanning electron microscopy), XRD (X-ray diffraction), and EDS (energy dispersive spectroscopy). Luminescence properties were investigated by photoluminescence measurements.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.4
• /
• pp.314-322
• /
• 2017

The electrolyte plays one of the most significant roles in the performance of electrochemical supercapacitors. Most liquid organic electrolytes used commercially have temperature and potential range constraints, which limit the possible energy and power output of the supercapacitor. The effect of elevated temperature on a lithium bis(oxalate)borate(LiBOB) salt-based electrolyte was evaluated in a symmetric supercapacitor assembled with activated carbon electrodes and different electrolyte blends of acetonitrile(ACN) and propylene carbonate(PC). The electrochemical properties were investigated using linear sweep voltammetry, cyclic voltammetry, galvanostatic charge-discharge cycles, and electrochemical impedance spectroscopy. In particular, it was shown that LiBOB is stable at an operational temperature of $80^{\circ}C$, and that, blending the solvents helps to improve the overall performance of the supercapacitor. The cells retained about 81% of the initial specific capacitance after 1000 galvanic cycles in the potential range of 0-2.5 V. Thus, LiBOB/ACN:PC electrolytes exhibit a promising role in supercapacitor applications under elevated temperature conditions.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.129-135
• /
• 2018

The aim of this study is to assess the applicability of ferrate(VI) in the efficient treatment of aqueous waste contaminated with potassium hydrogen phthalate (KHP) which is known to be a potent endocrine disrupting chemicals. Simulated batch reactor operations were conducted at a wide range of pH (7.0 to 12.0) and molar ratios of KHP to ferrate(VI). Kinetic studies were performed in the degradation process and overall rate constant was found to be 83.40 L/mol/min at pH 8.0. The stoichiometry of ferrate(VI) and KHP was found to be 1:1. Further, lower pH values and higher KHP concentrations were favoured greatly the degradation of KHP by ferrate(VI). Total organic carbon analysis showed that partial mineralization of KHP was achieved. The presence of several background electrolytes were studied in the degradation of KHP by ferrate(VI).

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.160-168
• /
• 2020

The current density in copper electroplating is directly related with the productivity; then, to increase the productivity, an increase in current density is required. This study is based on an analysis of changes in surface characteristics and mechanical properties by applying the addition of Alcian Blue (AB, C₅₆H₆₈Cl₄CuN₁₆S₄). The amount of Alcian Blue in the electrolytes is changed from 0 to 100 ppm. When Alcian Blue is added at 20 ppm, a seed layer is formed homogeneously on the surface at the initial stage of nucleation. However, crystals electroplated in electrolytes with more than 40 ppm of Alcian Blue are observed to have growth in the vertical direction on the surface and the shapes are like pyramids. This tendency of initial nucleation formation causes protrusions when the thickness of copper foil is 12 ㎛. Thereafter, a lot of extrusions are observed on the group of 100 ppm Alcian Blue. Tensile strength of groups with added Alcian Blue increased by more than 140% compare to no-addition group, but elongation is reduced. These results are due to the decrease of crystal size and changes of prior crystal growth plane from (111) and (200) to (220) due to Alcian Blue.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.78-78
• /
• 2007

In semiconductor devices, Cu has been used for the formation of multilevel metal interconnects by the damascene technique. Also lower dielectric constant materials is needed for the below 65 nm technology node. However, the low-k materials has porous structure and they can be easily damaged by high down pressure during conventional CMP. Also, Cu surface are vulnerable to have surface scratches by abrasive particles in CMP slurry. In order to overcome these technical difficulties in CMP, electro-chemical mechanical planarization (ECMP) has been introduced. ECMP uses abrasive free electrolyte, soft pad and low down-force. Especially, electrolyte is an important process factor in ECMP. The purpose of this study was to characterize KOH and $KNO_3$ based electrolytes on electro-chemical mechanical. planarization. Also, the effect of additives such as an organic acid and oxidizer on ECMP behavior was investigated. The removal rate and static etch rate were measured to evaluate the effect of electro chemical reaction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.5-10
• /
• 2018

In this study, the effect of physico-chemical factors (e.g., pressure, electrolyte, and organic matter) in the gas hydrate deposit on CH4-CO2 replacement process was investigated experimentally. The higher initial pressure during gas injection led the higher reaction rate at the first time, but finally it did not. Electrolytes and organic matter have some effects on reforming process after dissociation of gas hydrate. It is expected that further research using real marine sediments with actual gas hydrate will enable the development of technologies applicable to the characteristics of domestic seabed geology. Ultimately, it is expected that it will be possible to recover and utilize methane as an organic resource through application of domestic gas hydrate deposit in the Ulleung Basin, East Sea.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.47-51
• /
• 2002

Polyurethane was used as matrix for polymer electrolytes with liquid electrolyte consist of organic solvent as ethylene carbonate(EC), propylene carbonate(PC), and tetraethylene glycol dimethylether(TG) and 1M $LiCF_3SO_3$, which has high mechanical strength and porosity. Electrochemical properties fur polyurethane electrolytes with various liquid electrolytes were evaluated. The amount of immersed liquid electrolyte for TG with 1M $LiCF_3SO_3$ was increased to about $750\%$ by weight, and initial discharge capacity and cycle performance was better than others. Ionic conductivity for TG/EC(v/v,1:1) and PC/EC(v/v, 1:1) with 1M $LiCF_3SO_3$ was about $3.15\times10^{-3} S/cm, \;3.18\times10^{-3}S/cm$

• The Korean Journal of Physiology
• /
• v.2 no.1
• /
• pp.59-71
• /
• 1968

The uptake of phenolsulfonphthalein (PSP) and of paraaminohippuric acid (PAH) by cortical slices of the rabbit kidney was investigated while varying the composition of medium. The overall uptake of these substances displayed typical active transport characteristics and was significantly enhanced in presence of acetate. When the phosphate buffer was used the optimal pH was 7.4 for both substances. However, when the tris-buffer was used the optimal pH was 7.4 for PSP and 8.3 for PAH. Removal of $Na^+$ from the medium resulted in a significant reduction in the uptake. Similar results, though lesser in magnitude, were obtained when either $K^+\;or\;Ca^{++}$ was removed from the medium. However, there was no additive effect when $K^+\;and/or\;Ca^{++}$ were additionally removed from the $Na^+-free$ medium. The presence of ${NH_4}^+$ greatly reduced while $Li^+\;and\;Mg^{++}$ moderately reduced the uptake of both substances. However, choline had no effect. In substrate-leached slices, acetate greatly enhance the uptake of organic acids; but this action was not demonstrable in absence of $Na^+,\;K^+\;or\;Ca^{++}$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.222-225
• /
• 2009

In this paper, $TiO_2$ nanotube is prepared and the preparation is influenced by electrochemical etching rate and chemical dissolution rate. Especially, the chemical dissolution rate is lowered as the length $TiO_2$ nanotube increases. Titanium foil were anodized at various bias or current such as 20V, 55V and 0.1A (bath temperature $25^{\circ}C$) in organic electrolytes (ethylene glycol, glycerol) and then annealed at $450^{\circ}C$ and $650^{\circ}C$ to obtain the crystallized tubular $TiO_2$ on the Ti foil. Higher efficiency (89.1%) for the Cr(VI) reduction was obtained with the prepared sample compared to that (20.9%) with the sample in 0.5% HF electrolyte earlier studied.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.350-354
• /
• 2009

In this work, polymer - inorganic composites have prepared using polymer such as polyethylene glycol (PEG)/poly (methyl methacrylate, PMMA) and inorganic nanofillers materials such as TiO2 nanotubes (TiNTs)/carbon nanotubes (CNTs). The extensive structural, morphological and ionic properties revealed that the high surface area and tubular feature of nanofillers improved the interaction and cross-linking to polymer matrix which is significantly enhanced the ionic conductivity and electrical properties of composite electrolytes. Comparably high conversion efficiency ~4.5% has been observed by using the newly prepared PEG-TiNTs composite solid electrolyte as compared with PMMA-CNTs electrolyte based DSSCs (~3%). The detailed comparative properties would be discussed in term of their structural, morphology, ionic and photovoltaic properties.