• 대한화학회지
• /
• 제57권5호
• /
• pp.547-553
• /
• 2013

전해연마를 한 지르코늄(Zr)을 가지고 $F^-$ 이온이 함유된 무기 전해질과 유기 전해질에서 2 단계 양극산화를 진행하여 산화 지르코늄($ZrO_2$) 나노 다공성 산화막을 제조하였다. 2 단계 양극산화를 진행하면서 무기 전해질에서보다 유기 전해질에서 만들어진 지르코늄 산화막이 보다 균일한 나노 다공성 산화막을 가지게 되었다. 나노 다공성 산화막의 크기와 구조는 FE-SEM(field emission scanning electron microscopy), XRD(X-ray diffraction), EDS(energy dispersive spectroscopy)를 이용하여 특성을 분석하였고 형광스펙트럼을 측정하여 $ZrO_2$ 나노 다공성 산화막의 형광성을 알아보았다.

• Journal of Electrochemical Science and Technology
• /
• 제8권4호
• /
• pp.314-322
• /
• 2017

The electrolyte plays one of the most significant roles in the performance of electrochemical supercapacitors. Most liquid organic electrolytes used commercially have temperature and potential range constraints, which limit the possible energy and power output of the supercapacitor. The effect of elevated temperature on a lithium bis(oxalate)borate(LiBOB) salt-based electrolyte was evaluated in a symmetric supercapacitor assembled with activated carbon electrodes and different electrolyte blends of acetonitrile(ACN) and propylene carbonate(PC). The electrochemical properties were investigated using linear sweep voltammetry, cyclic voltammetry, galvanostatic charge-discharge cycles, and electrochemical impedance spectroscopy. In particular, it was shown that LiBOB is stable at an operational temperature of $80^{\circ}C$, and that, blending the solvents helps to improve the overall performance of the supercapacitor. The cells retained about 81% of the initial specific capacitance after 1000 galvanic cycles in the potential range of 0-2.5 V. Thus, LiBOB/ACN:PC electrolytes exhibit a promising role in supercapacitor applications under elevated temperature conditions.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.129-135
• /
• 2018

The aim of this study is to assess the applicability of ferrate(VI) in the efficient treatment of aqueous waste contaminated with potassium hydrogen phthalate (KHP) which is known to be a potent endocrine disrupting chemicals. Simulated batch reactor operations were conducted at a wide range of pH (7.0 to 12.0) and molar ratios of KHP to ferrate(VI). Kinetic studies were performed in the degradation process and overall rate constant was found to be 83.40 L/mol/min at pH 8.0. The stoichiometry of ferrate(VI) and KHP was found to be 1:1. Further, lower pH values and higher KHP concentrations were favoured greatly the degradation of KHP by ferrate(VI). Total organic carbon analysis showed that partial mineralization of KHP was achieved. The presence of several background electrolytes were studied in the degradation of KHP by ferrate(VI).

• 한국재료학회지
• /
• 제30권4호
• /
• pp.160-168
• /
• 2020

The current density in copper electroplating is directly related with the productivity; then, to increase the productivity, an increase in current density is required. This study is based on an analysis of changes in surface characteristics and mechanical properties by applying the addition of Alcian Blue (AB, C₅₆H₆₈Cl₄CuN₁₆S₄). The amount of Alcian Blue in the electrolytes is changed from 0 to 100 ppm. When Alcian Blue is added at 20 ppm, a seed layer is formed homogeneously on the surface at the initial stage of nucleation. However, crystals electroplated in electrolytes with more than 40 ppm of Alcian Blue are observed to have growth in the vertical direction on the surface and the shapes are like pyramids. This tendency of initial nucleation formation causes protrusions when the thickness of copper foil is 12 ㎛. Thereafter, a lot of extrusions are observed on the group of 100 ppm Alcian Blue. Tensile strength of groups with added Alcian Blue increased by more than 140% compare to no-addition group, but elongation is reduced. These results are due to the decrease of crystal size and changes of prior crystal growth plane from (111) and (200) to (220) due to Alcian Blue.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.78-78
• /
• 2007

In semiconductor devices, Cu has been used for the formation of multilevel metal interconnects by the damascene technique. Also lower dielectric constant materials is needed for the below 65 nm technology node. However, the low-k materials has porous structure and they can be easily damaged by high down pressure during conventional CMP. Also, Cu surface are vulnerable to have surface scratches by abrasive particles in CMP slurry. In order to overcome these technical difficulties in CMP, electro-chemical mechanical planarization (ECMP) has been introduced. ECMP uses abrasive free electrolyte, soft pad and low down-force. Especially, electrolyte is an important process factor in ECMP. The purpose of this study was to characterize KOH and $KNO_3$ based electrolytes on electro-chemical mechanical. planarization. Also, the effect of additives such as an organic acid and oxidizer on ECMP behavior was investigated. The removal rate and static etch rate were measured to evaluate the effect of electro chemical reaction.

• 유기물자원화
• /
• 제26권4호
• /
• pp.5-10
• /
• 2018

본 연구에서는 압력, 전해질, 유기물 등 가스하이드레이트 부존 지역의 물리화학적 인자가 치환반응에 미치는 영향을 실험적으로 규명하였다. 가스 주입 시 초기 압력이 높을수록 초반 반응속도는 향상되었으나 시간이 지남에 따라 치환효율이 일정한 값으로 수렴하였다. 전해질과 유기물 등의 경우 가스하이드레이트 해리 후 재생성 과정에서 일부 영향을 미치는 것으로 밝혀졌다. 향후 실제 유기성 메탄 하이드레이트가 부존된 퇴적토를 활용한 추가 연구를 통해 국내 해저 지질특성에 적용 가능한 기술 개발이 가능할 것으로 기대된다. 궁극적으로 향후 동해 울릉 분지의 가스하이드레이트 매장 지역 현장 적용을 통해서 유기성 자원인 메탄을 회수하고 활용할 수 있을 것으로 예상된다.

• 전기화학회지
• /
• 제5권2호
• /
• pp.47-51
• /
• 2002

본 연구에서는 높은 인장강도와 탄성력을 가지는 다공성 폴리우레탄(polyurethane, PU)을 지지체(matrix)로 이용하고, 유기 전해액 ethylene carbonate(EC), propylene carbonate(PC), tetraethylene glycol dimethylether(TG)와 1M $LiCF_3SO_3$를 부피비 1:1 비율로 혼합하여 액체 전해액을 제조하였으며, 높은 이론용량을 가지는 Li/S전지에 적용하여 전기 화학적 특성을 조사하였다. 1M $LiCF_3SO_3$에 TG를 첨가할 경우 유기 전해액의 함침량이 약 $750\%$ 증가하였으며 방전용량$(1065mAh/g{\cdot}sulfur)$ 및 사이클 특성이 가장 우수하였다. 1M $LiCF_3SO_3$에 TG/EC(v/v,1:1) 및 PC/EC(v/v,1:1)를 첨가한 경우 이온 전도도는 각각 $3.15\times10^{-3}(S/cm)$ 와 $3.18\times10^{-3}(S/cm)$로 나타났다.

• The Korean Journal of Physiology
• /
• 제2권1호
• /
• pp.59-71
• /
• 1968

The uptake of phenolsulfonphthalein (PSP) and of paraaminohippuric acid (PAH) by cortical slices of the rabbit kidney was investigated while varying the composition of medium. The overall uptake of these substances displayed typical active transport characteristics and was significantly enhanced in presence of acetate. When the phosphate buffer was used the optimal pH was 7.4 for both substances. However, when the tris-buffer was used the optimal pH was 7.4 for PSP and 8.3 for PAH. Removal of $Na^+$ from the medium resulted in a significant reduction in the uptake. Similar results, though lesser in magnitude, were obtained when either $K^+\;or\;Ca^{++}$ was removed from the medium. However, there was no additive effect when $K^+\;and/or\;Ca^{++}$ were additionally removed from the $Na^+-free$ medium. The presence of ${NH_4}^+$ greatly reduced while $Li^+\;and\;Mg^{++}$ moderately reduced the uptake of both substances. However, choline had no effect. In substrate-leached slices, acetate greatly enhance the uptake of organic acids; but this action was not demonstrable in absence of $Na^+,\;K^+\;or\;Ca^{++}$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.222-225
• /
• 2009

In this paper, $TiO_2$ nanotube is prepared and the preparation is influenced by electrochemical etching rate and chemical dissolution rate. Especially, the chemical dissolution rate is lowered as the length $TiO_2$ nanotube increases. Titanium foil were anodized at various bias or current such as 20V, 55V and 0.1A (bath temperature $25^{\circ}C$) in organic electrolytes (ethylene glycol, glycerol) and then annealed at $450^{\circ}C$ and $650^{\circ}C$ to obtain the crystallized tubular $TiO_2$ on the Ti foil. Higher efficiency (89.1%) for the Cr(VI) reduction was obtained with the prepared sample compared to that (20.9%) with the sample in 0.5% HF electrolyte earlier studied.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.350-354
• /
• 2009

In this work, polymer - inorganic composites have prepared using polymer such as polyethylene glycol (PEG)/poly (methyl methacrylate, PMMA) and inorganic nanofillers materials such as TiO2 nanotubes (TiNTs)/carbon nanotubes (CNTs). The extensive structural, morphological and ionic properties revealed that the high surface area and tubular feature of nanofillers improved the interaction and cross-linking to polymer matrix which is significantly enhanced the ionic conductivity and electrical properties of composite electrolytes. Comparably high conversion efficiency ~4.5% has been observed by using the newly prepared PEG-TiNTs composite solid electrolyte as compared with PMMA-CNTs electrolyte based DSSCs (~3%). The detailed comparative properties would be discussed in term of their structural, morphology, ionic and photovoltaic properties.