• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.486-492
• /
• 2009

Wet oxidations (WO) of quinoline in aqueous solution were carried out at $225^{\circ}C$ and $250^{\circ}C$. In the WO at $250^{\circ}C$, quinoline was degraded completely within 30 min and the reduction in total organic carbon (TOC) of 63% was achieved during 120 min. However, the rate of the reduction in TOC was only 13% within 240 min during the WO at $225^{\circ}C$. Nicotinic and acetic acid were found to be main intermediates formed during the oxidation of quinoline. With the addition of the homogeneous catalyst $CuSO_4$ or more easily oxidizable phenol, WOs of quinoline were also carried out under moderate conditions at $200^{\circ}C$. The catalytic WO with $CuSO_4$ of 0.20 g/L showed the destruction rates of quinoline and TOC comparable to those in the WO at $250^{\circ}C$. The WOs of quinoline-phenol mixture exhibited induction periods to degrade quinoline and phenol during which free radicals were produced to initiate WOs. With increasing initial concentrations of phenol at a given initial concentration of quinoline, the induction periods in the destructions of quinoline and phenol became shorter and the reduction in TOC increased from 60% to 75% during 180 min of the WOs. The reduction rate of an induction period decreased as increasing the initial concentration ratio of phenol to quinoline. On the other hand, phenol degradation in the WOs of quinoline-phenol mixtures required a longer induction period and proceeded slower compared to the case of the WO of phenol.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.288-303
• /
• 2012

In this study, real time measurements of particle number size distribution in urban Gwangju, coastal Taean, and industrial Yeosu in Korea were conducted in 2008 to understand the occurrence of ultrafine particle (UFP) (<100 nm) events, the variation of its concentration among different sampling sites, and UFP formation pathways. Also, to investigate seasonal and long-term variation of the UFP number concentration, data were collected for the period of 5 years (2007, 2008, 2010, 2011, and 2012) in urban Gwangju. Photochemical and combustion events were found to be responsible for the formation of UFP in the urban Gwangju site, whereas only photochemical event led to the formation of UFP in the coastal Taean site. The highest UFP concentration was found in industrial Yeosu (the average UFP number fractions were 79, 59 and 58% in Yeosu, Gwangju, and Taean, respectively), suggesting that high amount of gas pollutants (e.g., $NO_2$, $SO_2$, and volatile organic carbon (VOC)) emitted from industries and their photochemical reaction contributed for the elevated UFP concentration in the industrial Yeosu site. The UFP fraction also showed a seasonal variation with the peak value in spring (61.5, 54.5, 50.5, and 40.7% in spring, fall, summer, and winter, respectively) at urban Gwangju. Annual average UFP number concentrations in urban Gwangju were $5.53{\times}10^3\;cm^{-3}$, $4.68{\times}10^3\;cm^{-3}$, $5.32{\times}10^3\;cm^{-3}$, $3.99{\times}10^3\;cm^{-3}$, and $2.16{\times}10^3\;cm^{-3}$ in the year 2007, 2008, 2010, 2011, and 2012, respectively. Comparison of the annual average UFP number concentration with urban sites in other countries showed that the UFP concentrations of the Korean sites were lower than those in other urban cities, probably due to lower source strength in the current site. TEM/EDS analysis for the size-selected UFPs showed that the UFPs were classified into various types having different chemical species. Carbonaceous particles were observed in both combustion (soot and organics) and photochemical events (sulfate and organics). In the photochemical event, an internal mixture of organic species and ammonium sulfate/bisulfate was identified. Also, internal mixtures of aged Na-rich and organic species, aged Ca-rich particles, and doughnut shaped K-containing particles with elemental composition of a strong C with minor O, S, and K-likely to be originated from biomass burning nearby agricultural area, were observed. In addition, fly ash particles were also observed in the combustion event, not in the photochemical event.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.335-340
• /
• 2010

This study was conducted to select organic materials (OM) and nitrogen sources in composting of waste mushroom bed from Agaricus bisporus. We examined physio-chemical properties of the organic materials and the mixture ratio for preparing the wasted mushroom bed (M) compost. The carbon content of sawdust was higher than those of rice straw (R) as OM source and the nitrogen content was high in the order of fowl manure (F)>> pig manure (P)> cow manure (C). The compost was prepared to maintain the criteria of above 25% organic matter and then the change of their ingredients was estimated during the process of fermentation. The temperature of waste mushroom bed+pig manure+rice straw (MRP) treatment was varied fast throughout fermentation, on the other hand the temperature of waste mushroom bed+pig manure+sawdust (MSP) treatment was steadily elevated to the middle of composting. The pH of the compost was somewhat high to pH 8.5~9.0 at the early stage, but decreased to 7.5 at the end stage of composting. The content of OM after fermentation was decreased to the level of 19~21% in rice straw, but the sawdust treatment maintained 25~27% organic matter. The waste mushroom bed+fowl manure+rice straw (MRF) treatment, which contains 26.2% organic matter and 0.68% nitrogen, was the highest among them. The volume of compost was reduced to 50% by using rice straw as organic matter, but reduced to 30% by using the sawdust. The contents of heavy metal in the compost were suitable within the legal criteria. The number of microorganisms were higher in the rice straw than those in the sawdust. It was high in the order of fowl manure> pig manure> cow manure. The major groups consisted of aerobic bacteria, gram negative bacteria and Bacillus sp. and their populations after fermentation were increased to $1{\times}10^1{\sim}1{\times}10^2\;cfu\;g^{-1}$ rather than those before fermentation. Therefore we concluded that the waste mushroom bed+fowl manure+sawdust (MSF 3:9:1 v/v/v) treatment was suitable combination for high organic matter and nitrogen source, and the periods of composting were 50~60 days.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.101-101
• /
• 2018

Quantitative measurement of chloride ion concentration has an important role in various fields of electrochemistry, medical science, biology, metallurgy, architecture, etc. Among them, its importance of architecture is ever-growing due to unexpected degradations of building structure. These situations are caused by corrosion of reinforced concrete (RC) structure of buildings. And chloride ions are the most powerful factors of RC structure corrosion. Therefore, precise inspection of chloride ion concentration must be required to increase the accuracy of durability monitoring. Multi-walled Carbon nanotubes (MWCNTs) have high chemical resistivity, large surface area and superior electrical property. Thus, it is suitable for the channels of electrical signals made by the sensor. Silver nanoparticles were added to giving the sensing property. CuBTC, one of the metal organic frameworks (MOFs), was employed as a material to improve the sensing property because of its hydrophilicity and high surface area to volume ratio. In this study, sensing element was synthesized by various chemical reaction procedures. At first, MWCNTs were functionalized with a mixture of sulfuric acid and nitric acid because of enhancement of solubility in solution and surface activation. And functionalized MWCNTs, silver nanoparticles, and CuBTC were synthesized on PTFE membrane, one by one. Electroless deposition process was performed to deposit the silver nanoparticles. CuBTC was produced by room temperature synthesis. Surface morphology and composition analysis were characterized by scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), respectively. X-ray photoelectron spectroscopy (XPS) was also performed to confirm the existence of sensing materials. The electrical properties of sensor were measured by semiconductor analyzer. The chloride ion sensing characteristics were confirmed with the variation of the resistance at 1 V.

• Economic and Environmental Geology
• /
• v.43 no.1
• /
• pp.1-12
• /
• 2010

Geochemical approaches on the two recovered piston cores were performed to understand the characteristics of organic matters and the influence of the sea level variation of the East Sea in the Hupo Basin since the Holocene. The analyzing results on organic components (TOC and TN), and isotopic compositions of organic matters showed the variation to core locations and sampling depths. In core 08HZP-01, their values were gradually changed with depth from 4 mbsf to seafloor. However, rapid variation was observed at the boundary of 4.71 mbsf (meter below seafloor) in core 08HZP-03. Based on TOC/TN, $\delta^{13}C_{org}$ and $\delta^{15}N_{org}$, the origin of organic matters in the Hupo Basin can be divided into three groups; 1) predominant marine algae, 2) $C_3$ land plant, and 3) mixture of $C_3$ land plant and marine/freshwater algae. It is likely that the vertical and spatial variations of organic and isotopic compositions reflect the shifts in sedimentary environment (including sediment transportation) by ocean currents and sea-level changes and others during the Holocene period.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.917-930
• /
• 2017

This study was conducted to evaluate Raphanus sativus extracts to methane reduction in rumen. Five different levels of R. sativus extracts were used to investigate the most effective dosing level for the decrease of methane production in the rumen. The rumen fluid was collected from a cannulated one Hanwoo cow ($BW=450{\pm}30kg$) consuming 600 g/kg timothy and 400 g/kg concentrate. On fermentation day, rumen fluid was collected at 2 hr postfeeding R. sativus extracts was dosed to achieve final concentration of 0, 1, 3, 5, 7, and 9% respectively, to fermentation bottles containing the mixture of rumen fluid and McDougall's buffer and 300 mg of timothy was added as a substrate. The fermentation was conducted for 3, 6, 9, 12, 24, 48 and 72 hr incubation time at $39^{\circ}C$ with shaking. In vitro ruminal pH values were measured normal range for ruminal fermentation. Dry matter disappearance was significantly higher (p<0.05) at 3 hr incubation time 1, 3 and 5% doses than that of control. The highest methane reduction was observed in 12 hr incubation time 5, 7 and 9%. The carbon dioxide emission was also significantly (p<0.05) lower than that of control at 12 hr incubation time 5, 7 and 9%. The total volatile fatty acid was no significant difference between control and all doses level at 12 and 24 hr incubation time. At 24 hr incubation time, the result of real-time PCR were indicated that M. archea was significantly lower (p<0.05) at all doses level comparing to that of control. In conclusion, R. sativus extracts were significantly decreased methane emission. R. sativus extracts were significantly lower (p<0.05) than that of control at 12 hr incubation time 5, 7 and 9% and no adversely effect in rumen pH, dry matter disappearance and total VFA.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.5-13
• /
• 2020

This study was conducted to evaluate effects of compressed expansion rice hull (CERH) as bulking agent on physicochemical properties of composting poultry manure (PM) and of its fertilization on lettuce and pak choi growth. Treatments were designed as follows; sawdust treatment (90% PM + 10% sawdust; SP), peatmoss treatment (90% PM + 10% peatmoss; PP), and CERH treatments [PCR1 (90% PM + 10% CERH 1.3 mm) and PCR2 (90% PM + 10% CERH 3.0 mm)]. Physicochemical properties such as temperature, water content, pH, and total carbon of composted poultry piles for 31 days were unaffected by various bulking agents. However, total nitrogen content in compost pile was higher in PP and PCR1 than that of SP or PCR2. After composting for 31 days, content ranges of N, P2O5, and K2O in the composting PM piles were 19.1~19.7%, 47.6~51.6%, 2.76~3.65%, and 2.53~2.90%, respectively. As compared to SP treatment, dry weight of lettuce treated with PP and PCR1 increased by more than 10%, but only in PP for pak choi. These results indicated that CERH 1.3 could be used as bulking agents for composting PM on behalf of peatmoss or sawdust.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.926-931
• /
• 2011

Among various techniques for hydrogen production from organic wastewater, a dark fermentation is considered to be the most feasible process due to the rapid hydrogen production rate. However, the main drawback of it is the low hydrogen production yield due to intermediate products such as organic acids. To improve the hydrogen production yield, a co-culture system of dark and photo fermentation bacteria was applied to this research. The maximum specific growth rate of R. sphaeroides was determined to be $2.93h^{-1}$ when acetic acid was used as a carbon source. It was quite high compared to that of using a mixture of volatile fatty acids (VFAs). Acetic acid was the most attractive to the cell growth of R. sphaeroides, however, not less efficient in the hydrogen production. In the co-culture system with glucose, hydrogen could be steadily produced without any lag-phase. There were distinguishable inflection points in the accumulation of hydrogen production graph that resulted from the dynamic production of VFAs or consumption of it by the interaction between the dark and photo fermentation bacteria. Lastly, the hydrogen production rate of a repeated fed-batch run was $15.9mL-H_2/L/h$, which was achievable in the sustainable hydrogen production.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.260-268
• /
• 2005

A heat-resisting diatomite protection tube, using diatomite as a main component, was manufactured through an extrusion molding of ceramic slurry in different component ratios. And its mechanical strength, carbon analysis and microstructural non-homogeneity were investigated. After fixing $60wt\%$ of porous diatomite whose particle size was $50\~100\;{\mu}m$, the optimum mixture ratio with composition variables by changing $1\;wt\%$ of each component that was silica sol$(4.3\~7.3\;wt\%)$ as an inorganic binder, CMC (Sodium CarboxyMethyl Cellulose $(6\~9\;wt\%)$) as an organic binder and paper powder$(4.7\~7.7\;wt\%)$ was obtained. As a result of the investigation on a composition containing $60\;wt\%$ diatomite, $5.3\;wt\%$ silica sol, and $7\;wt\%$ CMC, a heat-resisting protection tube that could be used as a molten steel probe for measuring the temperature and components of molten steel was developed. The bending strength, compressive strength, and elastic modulus of the protection tube developed, that contained $\le2.3\;wt\%$ carbon, were 7.1 MPa, 7.5 MPa, and 1090 MPa, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.