• 한국디지털건축인테리어학회논문집
• /
• 제12권3호
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.

• 접착 및 계면
• /
• 제7권2호
• /
• pp.12-18
• /
• 2006

산업과 기술이 발전하면서 점점 더 향상된 기능과 성능이 우수한 접착제를 요구하고 있다. 고무수지의 장점, viscoelastic 한 점을 이용하고 단점을 보완하기 위하여 반구조 형태의 점착 접착제를 개발하였다. 또 용매를 이용하지 않아 요즈음에 문제가 되는 환경에도 부담을 줄이는 친환경성 점착제라 할 수 있다. 한편에 epoxy functional group과 다른 한편에 hydroxyl functional group을 함유하고 있는 poly(ethylene/butylene)과 한편에 hydroxyl functional group를 가지고 있는 poly(ethylene/butylene)에 UV 개시제를 이용하여 interpenetrating polymer network (IPN) 구조를 형성하고 여기에 점착 부여 수지로써 hydrocarbon resin을 첨가하여 고온에서 고무 수지가 갖고 있는 단점을 보완하였다.

• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.23-31
• /
• 2004

일반적으로 코팅은 철근 콘크리트를 보호하기 위해 사용되어지며, 이러한 목적으로 사용되어지는 코팅에는 무기계 뿐만 아니라 유기계 코팅이 있다. 무기계 코팅의 장점은 자외선 흡수성이 적고 불연성이라는 것이며, 반면 유기계 코형의 장점은 $CO_2, SO_2$투과성 및 물의 투수성이 낮으며, 철근 콘크리트의 보호능력은 유기계 코팅이 더 우수하다. 그러나 에폭시, 우레탄 및 아크릴과 같은 유기계 코팅은 콘크리트와의 열팽창계수와 탄성계수 차이로 인해 장기 접착강도가 저하되고, 통기성이 부족하여 형성된 막에 들뜸이 발생된다. 또한 유기계 코팅이 콘크러트의 습윤면에 적용될 경우에는 접착의 문제가 발생된다. 본 연구에서는 콘크리트를 보호하기 위해 폴리머와 세라믹을 합성시켜 개발된 코팅제의 물리 성능과 내구 성능 및 용출 안전성에 대한 시험을 하였다. 개발된 코팅계에 대하여 유기계 코팅재 및 에폭시와 비교하였으며, 시험결과 개발된 코팅재는 콘크리트를 보호하기 위한 유기계 코팅재에 비해 성능이 떨어지지 않았고, 반면 용출 안전성 측면에서는 에폭시보다 더 우수함을 보였다. 특히 물과 접해 있는 지하 콘크리트구조물을 보호하는 데에 적합하며, 무기계와 유기계 코팅재의 장점을 갖은 콘크리트 보호용 코팅재라고 판단된다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2005년도 제22회 학술대회 발표 논문집
• /
• pp.179-184
• /
• 2005

Materials used for repairing and restoring both pottery and porcelain are practically organic, which makes the analysis procedure difficult in the course of time. It is, however, important in the field of conservation to analyze the material applied in the past. In consequence, this research will examine the components of the restoration materials collected in the process of ceramic conservation: the fillings using SEM-EDS and FT-IR; retouching materials; the adhesive used between the filling and retouching material.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.287-288
• /
• 2003

Polyurethane(PU) materials have been generally used in the automobile, paint, furniture, adhesive, and textile industries. The use of Waterborne PU was motivated form the environmental point of view, i.e. reduction of solvent emissions into the atmosphere(volatile organic compounds, VOC)[1]. Generally speaking, phase change materials (PCM) have the capability of absorbing or releasing thermal energy to reduce or eliminate heat transfer at the temperature range of the particular temperature stabilizing material[2]. (omitted)

• Architectural research
• /
• 제7권1호
• /
• pp.19-26
• /
• 2005

Unlike other countries, Korea uses various kinds of wall-paper as finishing material. Conventional wall-paper consists of paper and vinyl, and petrochemical ink is used for the decoration of the surface. Adhesive is used to paste the wall with the wall-paper, which emit substantial amounts of VOCs and formaldehyde. In this study, VOCs characteristics emitted from specimens made of concrete, mortar, gypsum board and wall-paper were investigated using small chamber method. Moreover, concentration and emission factor of BTEX(Benzene, Toluene, Ethylbenzene, m,p,o-Xylene) and TVOC were investigated, and concentration and emission factor decay were estimated. As a result of the prediction, both time-dependent concentration decay and cumulative concentration can be converted into the logarithmic scale. Furthermore, prediction equations were developed from the experimental results under accurately controlled experimental conditions. Therefore, there may be difference if the estimated equations are directly applied to real buildings. Further research should be done on the generalization of the developed prediction equations.

• 접착 및 계면
• /
• 제8권1호
• /
• pp.28-33
• /
• 2007

It is a main trend not to use organic solvents in the adhesive industry from the recent environmental and safe points of view. For example, water-based, hot-melt, or UV curable adhesives are being investigated. Several different kinds of tackifiers that are formulated in the adhesives in order to give them more functional properties like initial tack and higher adhesion, etc., have been proposed to meet the recent trend. Firstly, the characteristics and fundamental properties of the respective materials are presented. In Japan, the trend to develop the water-based adhesives is most remarkable. While the environmental regulations are getting harder, Arakawa Chemical has been spending a lot of energy for the research, and developed toluene-free and solvent free tackifier dispersions that are presented precisely.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.56-59
• /
• 2011

The demand for cold rolled steel (CR) for structural members is gradually increasing. If no surface treatment (coating for corrosion resistance) for CR is conducted, its use is very limited because CR is vulnerable to corrosion. Therefore, we need to develop a coating solution to provide high corrosion resistance for CR. In this study, an organic/inorganic coating solution with Si and Ti (Si polysilicate 7 wt.% + Urethane 13 wt.% + Ti amorphous 0.5 wt.%; LR-0727(1)) was used to evaluate the corrosion resistance of CR under a salt spray test. The specimens with the LR-0727(1) coating were heat treated in a drying oven at $120{\sim}210^{\circ}C$for 5 min. The corrosion resistance was investigated using a salt spray test of 7 h. In addition, an adhesive test was conducted. Rust showed under a heat treatment of $150^{\circ}C$, but no vestiges were found over $160^{\circ}C$. The specimens with heat treatment at $160^{\circ}C$ or more did not experience delamination. From these results, it is considered that the temperature limit for optimum heat treatment is $160^{\circ}C$ considering energy efficiency.

• 한국의류학회지
• /
• 제13권3호
• /
• pp.207-222
• /
• 1989

New process for the preparation of the artificially soild cloth (ASC) used for detergency evaluation was developed and its detergency was also studied. ASC was prepared by the dipping of cotton cloth in the water in which oily soil, protein (gelatine), carbon black and clay had been dispersed. The clay used for this ASC was red yellowish soil around Mt. Kumjung and was a typical soil in Pusan area. Adhesive status of soil at prepared ASc was examined by an electron microscope, and crystallyzation and color change of used clay were evaluated with the determination of X-ray diffraction and surface reflectance. For the evaluation of detergency by the washing with commercial and model detergents, the behavior of soil removal from this ASC comparing with naturally soiled collar cloth was examined. Those results are summerized as followings; 1) Adhesive ststus of soil at prepared ASc was very similar to that of naturally soiled collar cloth. 2) A crystalline of clay calcined at $800^{\circ}C$ was disappeared in part and color of calcined clay changed into reddish yellow by the decomposition of organic matters. 3) More uniform ASc was prepared with clay calcined at $800^{\circ}C\;that\;200^{\circ}C$ however its detergency prepared from clay calcined at $800^{\circ}C$ was poor 4) A significant relationship between the content of inorganic matter in ASc and K/S value was found, however no significant result between the content of protein contaminated and K/S value was observed. 5) Detergency of prepared ASc had a very similar to that of naturally soiled collar cloh.

• 보존과학회지
• /
• 제35권4호
• /
• pp.295-307
• /
• 2019

In the process of the conservation treatment of the glass eyes of the stone standing Maitreya of Daejosa temple, Buyeo (Treasure No. 217), a blackish material, expected to be the adhesive for fixing the glass eyes, was collected and analyzed. Infrared spectroscopy and pyrolysis/gas chromatography/mass spectrometry (pyrolysis/GC/MS) were employed to identify the organic material in the sample. The IR analysis revealed the presence of materials such as apatite or bone black. The pyrogram of the sample was similar to that of Asian lacquer, among traditional adhesives. In particular, the pyrolysis/GC/MS analysis with online methylation detected 1,2-dimethoxy-3-pentadecylbenzene, methyl 7-(2,3- dimethoxyphenyl) heptanoate, and methyl 8-(2,3-dimethoxyphenyl)octanoate. These are known to be the pyrolysis products of catechol and its oxidation product, which indicated the presence of Asian lacquer in the sample. X-ray diffraction, X-ray fluorescence, and thermal gravimetry analysis showed that the sample contained ca. 60% inorganic substances, including apatite. Radiocarbon dating of the sample suggested that the blackish material was applied between the late 13^th and early 15^th century, revealing some discrepancy with the art-historical manufacturing time of the Maitreya. From the above analysis, it was concluded that Asian lacquer and bone ash were used to attach the glass eyes by forming a thick blackish lacquer layer.