• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.

• Journal of Adhesion and Interface
• /
• v.7 no.2
• /
• pp.12-18
• /
• 2006

Recently, as industries and technologies are increased, superior adhesives having more and more developed functions and properties have been demanded. In this article, to use the merits and viscoelastic properties of poly(ethylene/butylene) rubber resin and to supplement the demerits, semi-structure pressure sensitive adhesives (PSAs) are developed. Aslo, it can be said environmentally friendly PSAs because of not use the organic solvent and not emit volatile organic compounds (VOCs).

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.23-31
• /
• 2004

Normally, coating is used for protecting reinforced concrete. For this purpose, both organic and inorganic coatings are used. The advantages of inorganic coatings are lower absorption of UV, non-burning etc. On the other hand, organic coatings have the advantage of low permeability of $CO_2, SO_2$ and water. Organic coatings provide better protection for reinforced concrete. However, organic coatings such as epoxy, urethane and acryl reduce long-term adhesive strength by the difference of their thermal expansion coefficients and elastic modules from those of concrete, and the formed coating cover of these is blistered by poor breathing. Also, when organic coatings are applied to the wet surface of concrete, they have a problem with adhesion. In this study, a new coating material for protecting concrete was hybridized with polymer and ceramics. And tests were carried out on its physical and durable characteristics, and safety characteristic on elution. All results were compared with organic coating materials and epoxies and showed that the performance of the developed coating material was not inferior to that of other organic coatings in protecting concrete. On the other hand, safety characteristic on elution was superior to epoxies which were used in this study. So, the developed coating material was considered as a suitable protecting coating material which have advantages of inorganic and organic coatings for protecting underground concrete structures, especially in contact with water.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.179-184
• /
• 2005

Materials used for repairing and restoring both pottery and porcelain are practically organic, which makes the analysis procedure difficult in the course of time. It is, however, important in the field of conservation to analyze the material applied in the past. In consequence, this research will examine the components of the restoration materials collected in the process of ceramic conservation: the fillings using SEM-EDS and FT-IR; retouching materials; the adhesive used between the filling and retouching material.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.287-288
• /
• 2003

Polyurethane(PU) materials have been generally used in the automobile, paint, furniture, adhesive, and textile industries. The use of Waterborne PU was motivated form the environmental point of view, i.e. reduction of solvent emissions into the atmosphere(volatile organic compounds, VOC)[1]. Generally speaking, phase change materials (PCM) have the capability of absorbing or releasing thermal energy to reduce or eliminate heat transfer at the temperature range of the particular temperature stabilizing material[2]. (omitted)

• Architectural research
• /
• v.7 no.1
• /
• pp.19-26
• /
• 2005

Unlike other countries, Korea uses various kinds of wall-paper as finishing material. Conventional wall-paper consists of paper and vinyl, and petrochemical ink is used for the decoration of the surface. Adhesive is used to paste the wall with the wall-paper, which emit substantial amounts of VOCs and formaldehyde. In this study, VOCs characteristics emitted from specimens made of concrete, mortar, gypsum board and wall-paper were investigated using small chamber method. Moreover, concentration and emission factor of BTEX(Benzene, Toluene, Ethylbenzene, m,p,o-Xylene) and TVOC were investigated, and concentration and emission factor decay were estimated. As a result of the prediction, both time-dependent concentration decay and cumulative concentration can be converted into the logarithmic scale. Furthermore, prediction equations were developed from the experimental results under accurately controlled experimental conditions. Therefore, there may be difference if the estimated equations are directly applied to real buildings. Further research should be done on the generalization of the developed prediction equations.

• Journal of Adhesion and Interface
• /
• v.8 no.1
• /
• pp.28-33
• /
• 2007

It is a main trend not to use organic solvents in the adhesive industry from the recent environmental and safe points of view. For example, water-based, hot-melt, or UV curable adhesives are being investigated. Several different kinds of tackifiers that are formulated in the adhesives in order to give them more functional properties like initial tack and higher adhesion, etc., have been proposed to meet the recent trend. Firstly, the characteristics and fundamental properties of the respective materials are presented. In Japan, the trend to develop the water-based adhesives is most remarkable. While the environmental regulations are getting harder, Arakawa Chemical has been spending a lot of energy for the research, and developed toluene-free and solvent free tackifier dispersions that are presented precisely.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.56-59
• /
• 2011

The demand for cold rolled steel (CR) for structural members is gradually increasing. If no surface treatment (coating for corrosion resistance) for CR is conducted, its use is very limited because CR is vulnerable to corrosion. Therefore, we need to develop a coating solution to provide high corrosion resistance for CR. In this study, an organic/inorganic coating solution with Si and Ti (Si polysilicate 7 wt.% + Urethane 13 wt.% + Ti amorphous 0.5 wt.%; LR-0727(1)) was used to evaluate the corrosion resistance of CR under a salt spray test. The specimens with the LR-0727(1) coating were heat treated in a drying oven at $120{\sim}210^{\circ}C$for 5 min. The corrosion resistance was investigated using a salt spray test of 7 h. In addition, an adhesive test was conducted. Rust showed under a heat treatment of $150^{\circ}C$, but no vestiges were found over $160^{\circ}C$. The specimens with heat treatment at $160^{\circ}C$ or more did not experience delamination. From these results, it is considered that the temperature limit for optimum heat treatment is $160^{\circ}C$ considering energy efficiency.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.3 s.31
• /
• pp.207-222
• /
• 1989

New process for the preparation of the artificially soild cloth (ASC) used for detergency evaluation was developed and its detergency was also studied. ASC was prepared by the dipping of cotton cloth in the water in which oily soil, protein (gelatine), carbon black and clay had been dispersed. The clay used for this ASC was red yellowish soil around Mt. Kumjung and was a typical soil in Pusan area. Adhesive status of soil at prepared ASc was examined by an electron microscope, and crystallyzation and color change of used clay were evaluated with the determination of X-ray diffraction and surface reflectance. For the evaluation of detergency by the washing with commercial and model detergents, the behavior of soil removal from this ASC comparing with naturally soiled collar cloth was examined. Those results are summerized as followings; 1) Adhesive ststus of soil at prepared ASc was very similar to that of naturally soiled collar cloth. 2) A crystalline of clay calcined at $800^{\circ}C$ was disappeared in part and color of calcined clay changed into reddish yellow by the decomposition of organic matters. 3) More uniform ASc was prepared with clay calcined at $800^{\circ}C\;that\;200^{\circ}C$ however its detergency prepared from clay calcined at $800^{\circ}C$ was poor 4) A significant relationship between the content of inorganic matter in ASc and K/S value was found, however no significant result between the content of protein contaminated and K/S value was observed. 5) Detergency of prepared ASc had a very similar to that of naturally soiled collar cloh.

• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.295-307
• /
• 2019

In the process of the conservation treatment of the glass eyes of the stone standing Maitreya of Daejosa temple, Buyeo (Treasure No. 217), a blackish material, expected to be the adhesive for fixing the glass eyes, was collected and analyzed. Infrared spectroscopy and pyrolysis/gas chromatography/mass spectrometry (pyrolysis/GC/MS) were employed to identify the organic material in the sample. The IR analysis revealed the presence of materials such as apatite or bone black. The pyrogram of the sample was similar to that of Asian lacquer, among traditional adhesives. In particular, the pyrolysis/GC/MS analysis with online methylation detected 1,2-dimethoxy-3-pentadecylbenzene, methyl 7-(2,3- dimethoxyphenyl) heptanoate, and methyl 8-(2,3-dimethoxyphenyl)octanoate. These are known to be the pyrolysis products of catechol and its oxidation product, which indicated the presence of Asian lacquer in the sample. X-ray diffraction, X-ray fluorescence, and thermal gravimetry analysis showed that the sample contained ca. 60% inorganic substances, including apatite. Radiocarbon dating of the sample suggested that the blackish material was applied between the late 13^th and early 15^th century, revealing some discrepancy with the art-historical manufacturing time of the Maitreya. From the above analysis, it was concluded that Asian lacquer and bone ash were used to attach the glass eyes by forming a thick blackish lacquer layer.