• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.229-236
• /
• 2002

본 논문은 실용화된 지반개량용 마이크로시멘트 및 보통포틀랜드시멘트의 주입특성에 관한 연구로서 기초물성, 고결율, 침투성과 같이 실험적으로 주입재의 입도와 다짐정도를 조정하고, 주입대상 토사지반의 투수계수를 3종류로 변화시컥 약액주입의 주요 특성을 검토한 것이다. 주입재의 적용성을 평가하기 위하여 고결성 시험 및 침투성 시험을 실시한 결과, 모형토사지반의 상대밀도에 따른 투수계수를 $10^{-4}$~$10^{-2}$cm/sec로 변화시킨 경우, 마이크로시멘트는 투수 계수 $10^{-4}$cm/sec에서 유효고결율 75%, 침투주입율 86%로서 침투성 및 고결성이 우수한 결과를 나타낸 반면, OPC는 $10^{-2}$cm/sec에서 유효고결율 및 침투주입율이 50% 미만으로서 원활한 침투주입이 될 수 없음을 알 수 있었다. 댐 기초 지반 및 연약지반의 보강을 위해 주입재의 침투성이 요구되는 경우에는 마이크로시멘트가 적용성이 매우 우수한 것으로 판단된다. 동수지중 모형시험 결과 유속이 상대적으로 느린 경우 주입압이 높을수록, 완결형 주입재가 고결효과가 우수한 반면, 유속이 빠른 경우에는 완결형의 경우 주입재의 대부분이 외부로 유출되는 등 유효고결율이 매우 낮아 고결효과가 불량함을 알 수 있었다.

• Advances in concrete construction
• /
• 제2권1호
• /
• pp.29-37
• /
• 2014

Increasing emphasis on energy conservation and environmental protection has led to the investigation of the alternatives to customary building materials. Some of the significant goals behind understaking such investigations are to reduce the greenhouse gasemissions and minimize the energy required formaterial production.The usage of concrete around the world is second only to water. Ordinary Portland Cement (OPC) is conventionally used as the primary binder to produce concrete. The cement production is a significant industrial activity in terms of its volume and contribution to greenhouse gas emission. Globally, the production of cement contributes at least 5 to 7 % of $CO_2$. Another major problem of the environment is to dispose off the fly ash, a hazardous waste material, which is produced by thermal power plant by combustion of coal in power generation processes. The geopolymer concrete aims at utilizing the maximum amount of fly ash and reduce $CO_2$ emission in atmosphere by avoiding use of cement to making concrete. This paper reports an experimental work conducted to investigate the effect of curing conditions on the compressive strength of geopolymer concrete prepared by using fly ash as base material and combination of sodium hydroxide and sodium silicate as alkaline activator.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.58-68
• /
• 2009

In this study, rheological properties of ternary system cement containing ground fly ash(F3, Blaine specific surface area $8,100\;cm^2/g$) were investigated using mini slump, coaxial cylinder viscometer and conduction calorimeter. In the results, the segregation resistance was observed at high W/B and PC area while the replacement ratio of F3 was increasing. The 2:5:3 system was shown in higher fluidity and lower hydration heat than 3:4:3 system. The segregation range of cement pastes occurred over 175 mm in average diameter by mini slump and below $10\;dynesec/cm^2$ of the plastic viscosity or below 50 cP of the yield stress by coaxial cylinder viscometer. It was observed that even if BFS and FA blended together admixture properties would remaine as they were separately. The properties of admixture would not be changed. On the above results, the decreased replacement ratio of OPC and increased replacement ratio of admixtures would be possible.

• 콘크리트학회논문집
• /
• 제12권3호
• /
• pp.47-55
• /
• 2000

Protections from the frost damage at early ages are one of the serious problems to be considered in cold weather concreting. Frost damage at early ages brings about the harmful influences on the concrete structures such as surface cracks and declination of strength development. Therefore, in this paper, protecting periods of frost damage at early ages according to the standard specifications provided in KCI(Korean Concrete Institute) are suggested by appling logistic curve, which evaluates the strength development of concrete with maturity. W/B, kinds of cement and curing temperatures are selected as test parameters. According to the results, the estimation of strength development by logistic curve has a good agreement between calculated values and measured values. As W/B and compressive strength for protecting from frost damages at early ages increase, it is prolonged. It shows that the protecting periods of FAC(Fly Ash Cement) and BSC(Blast-furnace Slag Cement) concrete are longer than those of OPC(Ordinary Portland Cement) concrete. The protecting peridos from frost damage at early age by JASS are somewhat shorter than those by this paper.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.297-304
• /
• 2002

This study is about penetrability of Micro Cement(MC) used for ground improvement. In this study, the characteristics of chemical grouting such as solidification, penetrability were analyzed experimentally by changing permeability of ground, grain size and relative density of grout material. For evaluating applicability of grout material, solidification test and penetrability test were performed. From the results of the tests, effective solidification ratio and penetrability ratio of MC was each 75%, 86% to be excellent when ground permeability was in the range of 10$^{-2}$ and 10$^{-4}$ cm/sec. Otherwise, those of Ordinary Portland Cement(OPC) were both lower than 50% to be poor. When penetrability of grout material is needed for improvement of dam foundation and soft ground, application of MC Is much superior to that of the other materials. The results of the grouting tests in the water flowing ground show that solidification effect of long gel-time grout material is excellent as injection pressure increases when groundwater velocity is relatively low. But when groundwater velocity is relatively high, solidification effect of long gel-time grout material is very poor because most grout materials are outflowed. Therefore, as groundwater velocity is high, effective solidification ratio of long gel-time grout material is better than that of short gel-time grout material, also penetration distance of long gel-time grout material is longer than that of short gel-time grout material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.297-298
• /
• 2023

In the concrete industry, efforts are being made to reduce CO₂ emissions, and technologies that collect, store, and utilize CO₂ have recently been studied. This study analyzed the change in compressive strength after the accelerated carbonation test of Non-Sintered Cement(NSC) mortar. Type C Fly Ash and Type F Fly Ash were mixed in a 1:1 ratio and then mixed with Blast Furnace Slag fine powder to produce NSC. The mortar produced was cured underwater until the target age. In addition, an accelerated carbonation test was conducted under the condition of a concentration of 5 (±1.0%) of CO₂ gas for 14 days. The mortar compressive strength was measured before and after 14 days of accelerated carbonation test based on the 7th and 28th days of age. As a result of the experiment, the compressive strength was improved in all binder. In general, the compressive strength of NSC mortar subjected to the accelerated carbonation test was similar to that of Ordinary Portland Cement(OPC) mortar not subjected to the accelerated carbonation test.

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3942-3949
• /
• 2024

This study focuses on investigating the chemical degradation characteristics of cementitious barriers used in low-and intermediate-level radioactive waste repository by reactive transport modeling. The impact of the blending with supplementary cementitious materials (SCMs) in the barriers on the chemical degradation was evaluated to find the optimum barrier design. A number of different barrier designs were examined by replacing ordinary Portland cement (OPC) by SCMs (i.e., fly ash, silica fume, and blast-furnace slag). The simulation results showed that silica fume blended barrier has better durability against chemical degradation by rainwater compared to fly ash or blast-furnace slag blended barriers. In addition, the chemical durability of silica fume-based barrier increased with increasing replacement level up to about 20 %. It seems that the amount of formed calcium silicate hydrate (CSH) in the initial cement-based barrier highly affects the overall chemical durability. The newly developed reactive transport model demonstrated its capability for understanding the barrier performance and investigating the optimal design of the barrier system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권5호
• /
• pp.165-172
• /
• 2021

이 연구는 건설재료로 활용 가능성이 높은 다양한 무기계 재료의 탄소포집에 대한 성능 평가를 목적으로 한다. 이러한 목적을 위해 광물탄산화가 가능한 보통포틀랜드 시멘트(OPC), 고로슬래그 미분말(GGBS), 순환유동층 보일러 애시(CFBC)의 탄산화 반응에 대한 특성 변화를 분석하였다. 촉진 탄산화 실험을 통해 모든 재료에 대한 탄산화 양생을 수행하였으며, 탄산화 재령에 따라 열중량 분석에 의해 탄소포집량을 정량분석하였다. 모든 재료에서 탄소포집 효과가 확인되었고, 실험결과 탄소포집량은 CFBC, OPC, GGBS 순으로 나타났다. CFBC, OPC, GGBS의 28일 탄소포집량은 각각 9.4 wt.%, 3.9 wt.%, wt.1.3 %이다. 탄소포집은 탄산화 초기에 빠르게 발생하였으며, 재령이 증가함에 따라 느리게 발생하였다. SEM 이미지 분석을 통해, 모든 실험체에서 탄산화 양생에 의해 발생된 추가적인 생성물은 탄산칼슘(CaCO₃)으로 나타났다.

• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.347-353
• /
• 2009

콘크리트 내의 염소이온 침투에 영향을 미치는 정성적인 주요 인자로는 물-결합재비, 시멘트 종류, 재령, 주위 환경의 염소이온 농도 및 건습조건 등이 있다. 이에 따라 이 연구에서는 염소이온 확산실험을 통해 시멘트 종류 및 환경조건이 염소이온 확산특성에 미치는 영향을 조사하였다. 이를 위하여 물-결합재비 32%, 38% 및 43%에 대해서 보통 포틀랜드 시멘트(OPC), 2성분계 시멘트(BBC) 및 3성분계 시멘트(TBC) 각각을 사용한 콘크리트의 확산계수를 측정하였으며, 또한 물-결합재비 43%에 대해서 표준양생 및 해양환경에 폭로된 콘크리트의 확산계수를 측정하였다. 그 결과, 염소이온 침투 저항성은 물-결합재비가 감소함에 따라 증가하고, 2성분계 및 3성분계 시멘트를 사용한 콘크리트의 침투 저항성이 OPC 콘크리트에 비하여 우수한 것으로 나타났다. 따라서, 염해환경에 노출된 철근콘크리트 구조물의 내구수명을 증진시키기 위하여 광물질 혼화재를 혼입한 2성분계 혹은 3성분계 시멘트의 사용이 요구된다. 한편, 현장 폭로 시편의 염소이온 침투 저항성은 일정하지 않은 대기온도 하에서 염소이온의 침투, 파랑 및 건습반복의 영향으로 표준양생 시편의 경우보다 다소 저하되는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.97-108
• /
• 2008

시멘트 대체 재료로서 플라이애쉬의 사용은 시멘트 생산비용을 절감시키는 효과를 창출하였다. 반면에 플라이애쉬 혼입콘크리트는 OPC에 비해 상대적으로 긴 양생시간과 초기강도의 발현 저하를 들 수 있어 이의 해결을 위해 물리적 방법, 온도 및 화학적 방법 등과 같은 다양한 활성화 기술의 적용을 통하여 플라이애쉬 혼입 콘크리트의 수화를 가속시킬 수 있고, 콘크리트의 부식 저항성을 향상시킬 수가 있다. 본 연구에서는 10~40%의 치환률을 가진 활성화된 플라이애쉬 시편을 통해 개방 회로형 전위측정(Open circuit potential measurement)을 수행하였고, 투수시험, 급속염화물침투시험 및 SEM(Scanning electron microscopy)촬영을 통해 OPC 콘크리트와 비교 분석 하였다. 또한, 치환률의 임계범위 20~30%의 경우에 있어서 활성화된 플라이애쉬를 사용한 콘크리트가 열화저항성에 있어서 개선효과가 나타나고 있음을 확인하였다. 또한 플라이애쉬를 화학적으로 활성화시킨 경우가 본 연구에서 수행된 다른 활성화 방법들에 비해 더욱 좋은 결과를 나타나고 있음도 확인하였다.