• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.483-488
• /
• 2015

Blast furnace slag(BFS) is well known for its hardening mechanism in ordinary Portland cement with alkali activation due to its latent hydraulic property. The possibility of using calcium compound as activator for BFS has been investigated in this study. The hydration properties of calcium compound activated BFS binders were explored using heat of hydration, powder X-ray diffraction and compressive strength testing. Heat of hydration results indicate that the hydration heat of BFS is lower than OPC paste by about 50%. And ettringite as hydration product was formed continuously as the calcium sulfate was decreased. The maximum compressive strength of hardened BFS mortar at 28 days is confirmed to be 83% as compared with hardened OPC mortar.

• International Journal of Concrete Structures and Materials
• /
• 제19권1E호
• /
• pp.41-48
• /
• 2007

Addition of latex to concrete is known to increase its durability and permeability. The purpose of this study is to analyze air void systems in latex-modified concretes using a reasonable and objective method of image analysis with such experimental variables as water-cement (w/c) ratios, latex contents (0%, 15%) and cement types (ordinary portland cement (OPC), high-early strength (HES) cement and very-early strength (VES) cement). The results are analyzed by spacing factor, air volume (content) after hardening, air void distribution and structure. Additionally, air void systems and permeability of latex-modified concrete (LMC) are compared by a correlation analysis. The results are as follows. The LMC of the same w/c ratio showed better air entraining (AE) effect than OPC with AE water reducer. The VES-LMC showed that the quantity of entrained air below $100{\mu}m$ increased more than four times. For the case of HES-LMC, microscopic entrained air between the range of 50 to $500{\mu}m$ increased greater than 7 times even in the absence of anti-foamer. Although spacing factor was measured rather low, the permeability of latex-modified concrete was good. It is construed that air void system does not have a considerable effect on the property of latex-modified concrete, but latex film (membrane) has a definite influence on the durability of LMC.

• 한국농공학회논문집
• /
• 제51권1호
• /
• pp.21-26
• /
• 2009

This study was performed to evaluate the physical and mechanical properties of concrete using waste activated carbon. Materials used were ordinary portlant cement, crushed coarse aggregate, natural fine aggregate, waste activated carbon, and superplasticizer. The substitution ratios of waste activated carbon were 0,1,2,3,4,5,6,7,8,9 and 10%. The unit weight was decreased and water absorption ratio was increased with increasing the waste activated carbon content, respectively. When the substitution ratio of waste activated carbon was 3%, compressive strength, flexural strength and dynamic modulus of elastisity were more higher than that of the ordinary portland cement (OPC), and it was decreased with increasing the waste activated carbon content, respectively. The most effective contents of waste activated carbon was 2% in performance and 4% in practical use Accordingly, waste activated carbon can be used for concrete material.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.421-424
• /
• 2008

본 연구에서는 산 및 황산염 저항성에 미치는 시멘트 종류의 영향을 평가하기 위하여 물-결합재 비 32% 및 43%에 대해서 보통 포틀랜드 시멘트(OPC), 2성분계 시멘트(BBC), 및 3성분계 시멘트(TBC)와 같은 3종류의 시멘트를 사용한 콘크리트 공시체를 제작하였다. 제작된 콘크리트 공시체에 대해서 JSTM C 7401에 따라 5% 황산, 10% 황산나트륨 나트륨 및 10% 황산마그네슘 용액에 의한 침지실험을 통하여 재령에 따른 외관 변화 및 질량 감소율을 평가하였다. 재령 91동안의 침지실험 결과로부터, 콘크리트의 산 및 황산염에 대한 저항성은 물-결합재비가 감소할수록 증가하고, BBC와 TBC 콘크리트가 OPC 콘크리트보다 우수한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.151-156
• /
• 2002

Drying shrinkage cracking which may be caused by the relatively large specific surface is a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. LMC and RSLMC were studied for field applications very actively in terms of strength and durability in Korea. However, there were no considerations in drying shrinkage. Therefore, the purpose of this study was to investigate the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), latex contents(0, 5, 10, 15, 20%), W-C ratios, and curing days at a controlled environment of 60% of relative humidity and 2$0^{\circ}C$ of temperature. The drying shrinkage for specimens was measured with a digital dial gauge of Demec. The test results showed that the drying shrinkage of LMC and RSLMC were considerably lower than that of OPC and RSC, respectively. This might be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic, and colloidal properties of the latexes resulting in reduced water evaporation.

• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.211-219
• /
• 2023

This study analyzes the changes in the physical properties of grout by irradiating it with ultrasonic energy and assesses the injectability of the grout into deep rock fractures. The materials used in the research are OPC (Ordinary Portland Cement) and MC (Micro Cement), and are irradiated depending on the water/cement ratio. After irradiating the grout with ultrasonic energy, viscosity, compressive strength, and particle size are analyzed, and the results of the particle size analysis were applied to Nick Barton's theory to evaluate the injectability of the grout into deep rock fractures under those conditions. It was found that the viscosity of the grout decreased after ultrasonic wave irradiation, and the rate of viscosity reduction tended to decrease as the water/cement ratio increased. Additionally, an increase in compressive strength and a decrease in particle size were observed, indicating that the grout irradiated with ultrasonic energy was more effective for injection into rock fractures.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.804-810
• /
• 2003

건설폐기물 중 폐콘크리트를 40$0^{\circ}C$로 가열한 후 ball mill로 분쇄하여 재생골재를 생산할 때 발생된 미분말을 보통 포틀랜드 시멘트의 SiO$_2$, CaO, A1$_2$O$_3$원에 대한 대체원료물질로서 활용하고자 하였다. 클링커를 제조하기 위한 주원료는 석회석, shale, 전로슬래그, fly ash를 이용하였고, modulus는 LSF:91.0, SM:2.60, IM:1.60로 고정한 후 shale에 대해 미분말을 25, 50, 15, 100%까지 치환하여 클링커를 제조하였다. 클링커의 주요생성광물은 1,45$0^{\circ}C$에서 OPC와 같은 광물상인 $C_3$S, $\beta$-C$_2$S, $C_3$A, $C_4$AF 상으로 나타났다. 조합원료의 반응성을 비교하기 위해 시차열분석을 실시하고, 소성성지수를 구한 결과, 클링커의 광물상 생성온도는 plain과 유사했으며, 소성성지수는 48.6-51.4 정도로 나타났다.

• Advances in concrete construction
• /
• 제9권3호
• /
• pp.267-278
• /
• 2020

This paper reports on the result of an experimental investigation carried out to study the compressive strength and sorptivity properties of blended cement concrete exposed to 5% and 10% MgSO₄ solution using fly ash (FA) and silpozz. Usually in sulphate environment the minimum grade of concrete is M30 and the mix design is done for target mean strength of 39 MPa. Silpozz is manufactured by burning of agro-waste rice husk in designed furnace in between 600° to 700℃ which is one of the main agricultural residues obtained from the outer covering of rice grains during the milling process. There are four mix series taken with control mix. The control mix made 0% replacement of FA and silpozz with Ordinary Portland Cement (OPC). The first mix series made 0% FA and 10-30% replacement of silpozz with OPC. The second mix series made with 10% FA and 10-40% replacement of silpozz with OPC. The third mix series made 20% FA and 10-30% replacement of silpozz with OPC and the fourth mix series made 30% FA and 10-20% silpozz replaced with OPC. The samples (cubes) are prepared and cured in normal water and 5% and 10% MgSO₄ solution for 7, 28 and 90 days. The studied parameters are compressive strength and strength deterioration factor (SDF) for 7, 28 and 90 days. The water absorption and sorptivity tests have been done after 28 days of normal water and magnesium sulphate solution curing. The investigation reflects that the blended cement concrete incorporating FA and silpozz showing better resistance against MgSO₄ solution when compared to normal water curing (NWC) samples.

• 콘크리트학회논문집
• /
• 제22권2호
• /
• pp.219-228
• /
• 2010

하수도, 오 폐수, 토양 속, 지하수 및 해수 등의 환경에 건설되는 콘크리트 구조물은 산 및 황산염에 노출되어 있다. 이 같은 산 및 황산염 침투로 포틀랜드 시멘트 중의 수화생성물과 산 및 황산염 이온이 반응하여 팽창 수화물을 생성함으로써 콘크리트에 팽창 및 균열을 발생시켜, 결국 콘크리트 매트릭스에 손상을 일으킨다. 따라서 이 연구의 목적은 콘크리트의 황산 및 황산염 침투 저항성에 미치는 광물질 혼화재의 영향을 평가하여, 황산 및 황산염 침투에 대한 고저항성 콘크리트를 제시하는 것이다. 이를 위하여 광물질 혼화재의 형태 및 비율을 변화시킨 OPC, 2성분계 및 3성분계의 3가지 종류의 시멘트를 사용하여 물-결합재비 32% 및 43%인 콘크리트를 제조하였다. 제작된 콘크리트 시편은 민물, 5% 황산, 10% 황산나트륨 및 10% 황산마그네슘 용액에 재령 28, 56, 91, 182 및 365일 동안 각각 침지시켰다. 콘크리트의 황산 및 황산염 침투 저항성을 평가하기 위하여 외관변화 관찰과 압축강도 비 및 질량 변화율을 측정하였다. 그 결과, 광물질 혼화재를 혼입한 콘크리트의 황산 및 황산나트륨 침투에 대한 저항성은 OPC 콘크리트 경우 보다 훨씬 우수한 것으로 나타났으나, 황산마그네슘의 경우 비결합재질의 규산마그네슘수화물(M-S-H)의 형성으로 광물질 혼화재를 혼입한 콘크리트가 OPC 콘크리트보다 불리한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.213-214
• /
• 2010

본 연구의 목적은 황산염 침투를 받은 콘크리트의 염소이온 확산특성을 평가하는 것이다. 이를 위하여, OPC, 2성분계 및 3성분계 시멘트를 혼입한 3가지 형태의 콘크리트를 물-결합재비 32% 및 43%에 대해서 제작하였다. 제작한 콘크리트 시험체를 365일 동안 황산염 용액에 침지시킨 후 NT BUILD 492에 의해 염소이온 침투 저항성 시험을 수행하였다. 그 결과, 황산염 침투를 받은 콘크리트는 동일 재령의 표준양생 콘크리트보다 염소이온 침투 저항성이 크게 저하되는 것으로 나타났다.