Journal of The Korean Society of Agricultural Engineers (한국농공학회논문집)

The Korean Society of Agricultural Engineers (한국농공학회)
권호 표지
DOI QR코드

DOI QR Code

Physical and Mechanical Properties of Concrete Using Waste Activated Carbon

폐활성탄을 혼입한 콘크리트의 물리.역학적 성질

  • Published : 2009.01.29
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed to evaluate the physical and mechanical properties of concrete using waste activated carbon. Materials used were ordinary portlant cement, crushed coarse aggregate, natural fine aggregate, waste activated carbon, and superplasticizer. The substitution ratios of waste activated carbon were 0,1,2,3,4,5,6,7,8,9 and 10%. The unit weight was decreased and water absorption ratio was increased with increasing the waste activated carbon content, respectively. When the substitution ratio of waste activated carbon was 3%, compressive strength, flexural strength and dynamic modulus of elastisity were more higher than that of the ordinary portland cement (OPC), and it was decreased with increasing the waste activated carbon content, respectively. The most effective contents of waste activated carbon was 2% in performance and 4% in practical use Accordingly, waste activated carbon can be used for concrete material.

Keywords

References

  1. Choi, H. Y., H. J. Hwang, M. H. Kim, and M. H. Kim, 2000. A study on the development of hwangto admixture for the application of cement mortar. Journal of the Korean Institute of Building Construction (6): 95-102 (in Korean)
  2. Hassler. J. W., 1974. Purification with activated carbon. New York. Chemical Publishing Co.
  3. Jung. H. W., and J. S. Moon, 1997. Application of wasted tire chips for aggregate. Journal of the Korea Concrete Institute 9(6): 29-37 (in Korean)
  4. Mark Fintel, 1985. Handbook of concrete engineerring. 2nd Ed. Van Nostrand Reinhold Comp: 45-94
  5. Shin, S. W., 1994. High-strength and high-performance concrete in korea. ACI SP 159: 135-143 (in Korean)
  6. Sung, C. Y., 1997. An experimental study on the development and engineering performance of ricehusk ash concrete. Journal of the korean Society of Agricultural Engineers 39(5): 55-63 (in Korean)
  7. Sung, C. Y., and Y. I. Kim, 1998. Physical and mechanical properties of rice straw ash concrete. Journal of the korean Society of Agricultural Engineers 40(4): 103-108 (in Korean)
  8. Sung, C. Y., N. H. Ryu, and J. N. Youn, 2002. Physical and mechanical properties of mortar using non-active hwangto and stone dust. Journal of the korean Society of Agricultural Engineers 44(6): 83-89 (in Korean)
  9. The Korea Concrete Institute (KCI), 2005. The newest engineering of concrete: 313-428 (in Korea)
  10. Woo. J. K., 2006. A study on the development of friendly environment mortar by using activated carbon as fine aggregate. Journal of the Korean Institute of Building Construction 6(2): 105-109 (in Korean) https://doi.org/10.5345/JKIC.2006.6.2.105

Cited by

  1. Characteristic of Resilient Modulus and Unconfined Compressive Strength for Recycled Materials blend with Cement Kiln Dust vol.52, pp.2, 2010, https://doi.org/10.5389/KSAE.2010.52.2.019
  2. Comparison of Coefficient of Consolidation and Prediction of Excess Pore Water Pressure of Agricultural Reservoir under Embankment on Soft Ground vol.52, pp.2, 2010, https://doi.org/10.5389/KSAE.2010.52.2.001