• BMB Reports
• /
• 제40권3호
• /
• pp.412-418
• /
• 2007

Phospholipid hydroperoxide glutathione peroxidase (PHGPx) is an unique antioxidant enzyme that directly reduces lipid hydroperoxides in biomembranes. In the present work, the entire encoding region for Oryza sativa PHGPx was expressed in Escherichia coli M15, and the purified fusion protein showed a single band with 21.0 kD and pI = 8.5 on SDS- and IFE-PAGE, respectively. Judging from CD and fluorescence spectroscopy, this protein is considered to have a well-ordered structure with 12.2% $\alpha$-helix, 30.7%$\beta$-sheet, 18.5% $\delta$-turn, and 38.5% random coil. The optimum pH and temperature of the enzyme activity were pH 9.3 and 27$^{\circ}C$. The enzyme exhibited the highest affinity and catalytical efficiency to phospholipid hydroperoxide employing GSH or Trx as electron donor. Moreover, the protein displayed higher GSH-dependent activity towards t-Butyl-OOH and $H_2O_2$. These results show that OsPHGPx is an enzyme with broad specificity for hydroperoxide substrates and yielded significant insight into the physicochemical properties and the dynamics of OsPHGPx.

• 한국수자원학회논문집
• /
• 제41권8호
• /
• pp.797-806
• /
• 2008

본 연구에서는 특정 해상도상에서 정의되는 유역의 모든 배수경로들로 구성되는 배수망을 도시하여 자연유역의 배수구조에 대한 기하학적 특성을 분석하여 보았다. 이를 위하여 Fractal 나무와 Horton의 법칙을 기반으로 분기에 의하여 조직되는 망상구조에 대하여 이론적 고찰을 수행하였다. 배수망의 작도에는 ArcGIS를 적용하였고 작도된 배수망에 대하여 Strahler의 차수기법에 따라 위상구조를 수립하여 차수별 배수구조의 기하학적 특성을 분석하고자 시도하여 보았다. Richardson의 방법에 따라 배수구조의 Fractal 특성을 분석해 본 결과 지표면유동과 하천유동 사이에는 개별적인 거동특성이 존재할 수 있음을 볼 수 있었고 자연유역의 하천망은 공간을 채워가는 Fractal 도형임을 확인할 수 있었다. 본 연구의 결과로부터 지표면유동을 포함한 망상구조에 대한 Fractal 이론을 실제유역에 적용하였을 경우 지금까지의 경험식에 의한 차수법칙과 상이한 결과를 나타냄을 알 수 있었다. 이의 결과들은 추후 망상구조의 결정에 크게 기여될 수 있으리라 판단된다.

• 센서학회지
• /
• 제18권2호
• /
• pp.110-115
• /
• 2009

Polystyrene (PS) microspheres were used to good advantage as a template material to prepare macroporous $TiO_2$ thin films. This is enabled to run the thermal decomposition of the PS without the collapsing of the 3-D macroporous framework during the calcination step. $TiO_2$ thin films were deposited onto the colloidal templated substrates at room temperature by RF sputtering, and then samples were thermally treated at $450^{\circ}C$ for 40.min in air to remove the organic colloidal template and induce crystallization of the $TiO_2$ film. The macroporous $TiO_2$ thin film exhibited a quasi-ordered partially hexagonal close-packed structure. Burst holes, estimated to be formed during PS thermal decomposition, are seen as the hemisphere walls. the inner as well as the outer surfaces of the hollow hemispheres formed by the method of thermal decomposition can be easily accessed by the diffusing gas species. As a consequence, the active surface area interacting with the gas species is expected to be enlarged about by a factor of fourth as large as compared to that of a planar films. Also the thickness at neighboring hemisphere could be controlled a few nm thickness. If the acceptor density becomes as large that depletion width reaches those thickness, the device is in the pinch off-situation and a strong resistance change should be observed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.354-354
• /
• 2012

In this study, we report the vertically aligned ZnO nanowires by using different type of Ga-doped ZnO (GZO) thin films as seed layers to investigate how the underlying GZO film micro structure affects the distribution of ZnO nanowires. Arrays of highly ordered ZnO nanowires have been synthesized on GZO thin film seed layer prepared on p-Si substrates ($7-13{\Omega}cm$) with utilize of a pulsed laser deposition (PLD). With the vapor-liquid-solid (VLS) growth process, the ZnO nanowire synthesis carries out no metal catalyst and is cost-effective; furthermore, The GZO seed layer facilitates the uniform growth of well-aligned ZnO nanowires. The influence of the growth temperature and various thickness of GZO seed layer have been analyzed. Crystallinity of grown seed layer was studied by X-Ray diffraction (XRD); diameter and morphology of ZnO nanowires on seed layer were investigated by field emission scanning electron microscopy (FE-SEM). Our results suggest that the GZO seed layer with high c-axis orientation, good crystallinity, and less lattice mismatch is key parameters to optimize the growth of well-aligned ZnO nanowire arrays.

• 공업화학
• /
• 제17권3호
• /
• pp.274-279
• /
• 2006

해중합 촉매인 zinc acetate ($C_{4}H_{6}O_{4}Zn{\cdot}2H_{2}O{\cdot}0.2\;mol$)와 lithuium hydroxide $H_{2}O$ ($LiOH{\cdot}H_{2}O{\cdot}0.14\;mol$)를 용매인 ethyl alcohol (99.9%)에 용해시킨 후 분산제인 hydroxypropyl cellulose (HPC)를 첨가하여 균일하게 분산된 ZnO (산화아연) 콜로이드 용액을 졸-겔법을 이용하여 합성하였다. ZnO 입자들의 크기와 모양은 분산제인 HPC에 의해 결정되었다. 또한 나노 크기의 ZnO 입자들은 zinc-2-ethylhexagonate를 기초로 한 침천법을 이용하여 얻었다. 이렇게 얻어진 ZnO 분말을 DLS, XRD, FE-SEM, 그리고 UV-Vis를 통하여 특성 분석을 하였다. 그 결과, 산화아연 분말은 자기조립 반응으로 균일하고 육방정계 모양의 구조를 가지는 것을 볼 수 있었다. 또 평균 입자 크기는 거의 40 nm이고 균일하게 분산되었다.

• 공업화학
• /
• 제16권4호
• /
• pp.461-473
• /
• 2005

나노 기술은 현대 과학에 있어서 가장 주목 받고 있는 분야이며, 특히 나노미터 크기의 디멘션(dimension)을 가지는 나노 구조물의 제작은 나노 기술 연구의 출발점이며, 핵심 요소이다. 양극산화 알루미나 나노 템플레이트(anodicaluminum oxide or AAO nanotemplate) 기술은 상대적으로 공정이 쉽고 경제적이며, 대면적으로 나노 템플레이트의 제작이 가능하다는 장점을 가지고 있다. 또한 현재의 리소그래피 기술로는 달성하기 어려운 수준의 매우 큰 종횡비(aspect ratio)를 가능하게 하고, 조건을 변화시킴에 따라서 나노 템플레이트 기공의 직경 및 길이, 기공 밀도의 조절이 용이하다는 장점을 가지고 있어서 최근 10여 년간 매우 활발하게 이와 관련된 연구가 진행되어 왔으며, 다양한 나노 기술 분야로의 응용이 기대된다. 본 총설에서는 양극산화 알루미나 나노 템플레이트의 제조 및 응용에 대해 기술하였다.

• 한국주조공학회지
• /
• 제15권5호
• /
• pp.469-476
• /
• 1995

The effects of Cr, Mo or B additions were investigated on $B2{\leftrightarrow}DO_3$ structural transition temperature $(T_C)$ and mechanical properties of Fe-28at.%Al. The raw materials were arc-melted in vacuum and then subjected to the following heat-treatments to maximize the $DO_3$ ordered structure : $1000^{\circ}C/7days$, slowly cooled to $500^{\circ}C$ and then held for 5 days. In the effect on the grain refinment, the addition of alloying element B was the most effective. The addition of Cr or Mo had little effect. When 1at.%Mo was added, $T_c$ increase about $30^{\circ}C$, but Cr had a very little effect on $T_c$. On the contrary, when B was added, $T_c$ was apt to come down minutely. In the additional effect of alloying element on the mechanical properties, Cr was apt to decrease the microvickers hardness and yield strength, Mo and B didn't have much effect. In the case of compressure strength test, the effect of the environment on the yield strength was contrary to the result of the tensile strength test.

• 한국디지털건축인테리어학회논문집
• /
• 제12권4호
• /
• pp.117-124
• /
• 2012

The importance of the digital architecture is increasing more ever. Currently, CAD and 3D programs are used as design fields, but the BIM (building information modeling) is gradually interested. BIM is mandatory on the project more than 50 billion won ordered by the government since 2012, it will be expanded to a total of government orders by 2016. University needs to evaluate teaching methods and computer-aided design environments such as CAD and BIM. In this paper, we surveyed computer-aided design environments and teaching methods for 73 students at the J University of Department of architectural engineering. Main results are as follows: 1. Hardlock is uncomfortable but necessary program for the computer management. 2. The desk placement considering the behavior of the design students results in higher satisfaction. 3. Because a CAD subject was a difficult course content and progress is fast, students thought it is difficult to follow. Especially, first-year students answered it is difficult to learn program and understand the structure of the building at the same time. 4. First-year students want to learn CAD more. Second-, third-, fourth-year students want to learn Photoshop more. Supplement for these classes is required. 5. Students answered that a teaching method of a CAD subject would be good to their own practice after the professor demonstrates for students. The senior's assistance is also a high effective way in the class. 6. During class, students' activities such surfing the web and Kakao Talk on a smartphone disrupt the class, there is a need to regulate by a rule such as disconnect computers from a network and against using smartphone. Although the Internet with the popularization of smartphones confers a benefit on modern life, it causes damage to us. This is a hard part for a salaried workers as well as students studying equally. The self management is required and a professor needs to control and restraint in a university classroom. The professor's continuing interest to students can increase the effectiveness of learning.

• 접착 및 계면
• /
• 제14권2호
• /
• pp.82-87
• /
• 2013

본 연구에서는 레졸, 질산철 그리고 트리블럭 공중합체를 이용하여 직접 탄화과정에 의해 자성체 나노입자가 분산된 탄소나노세공체를 합성하였다. 나노세공 마그네타이트/카본($Fe_3O_4$/carbon) 나노복합체는 낮은 마그네타이트 함량(1 wt%)을 가지고 잘 배열된 이차원적 육방체 구조(p6mm)를 보이며, 균일한 세공크기(3.6 nm), 높은 표면적(635 $m^2/g$)과 세공부피(0.48 $cm^3/g$)를 가진다. 작은 입자크기(10.2 nm)를 가지는 마그네타이트 나노입자는 초상자기성(7.7 emu/g)을 보이고 탄소 세공벽 내에 잘 분산되었다. 나노세공 마그네타이트/카본 물질은 최대 995 mg/g의 아이부프로펜 흡착량을 보였다. 또한, 자석을 이용하여 용액과 나노세공 마그네타이트/카본 물질의 분리가 용이하였다. 본 연구에서 제조된 나노복합체는 우수한 아이부프로펜 흡착제로 작용하였다.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.586-591
• /
• 2013

The printing of nanomaterials onto certain substrates is one of the key technologies behind high-speed interconnection and high-performance electronic devices. For the printing of next-generation electronic devices, a printing process which can be applied to a flexible substrate is needed. A printing process on a flexible substrate requires a lowtemperature, non-vacuum process due to the physical properties of the substrate. In this study, we obtained well-ordered Ag nanowires using modified gravure printing techniques. Ag nanowires are synthesized by a silver nitrate ($AgNO_3$) reduction process in an ethylene glycol solution. Ag nanowires were well aligned by hydrodynamic force on a micro-engraved Si substrate. With the three-dimensional structure of polydimethylsiloxane (PDMS), which has an inverse morphology relative to the micro-engraved Si substrate, the sub-micron alignment of Ag nanowires is possible. This technique can solve the performance problems associated with conventional organic materials. Also, given that this technique enables large-area printing, it has great applicability not only as a next-generation printing technology but also in a range of other fields.