• 폴리머
• /
• 제29권3호
• /
• pp.314-319
• /
• 2005

촉매인 stannous octeate 존재 하에서 글리콜리드를 이관능성 개시제인 1,4-butanediol, 1,6-hexanediol, 1,4-cyclohexanediol, 1,4-cyclohexanedimethanol과 반응시켜 4가지 종류의 새로운 지방족 디올을 합성하였다. 이들 새로운 디올과 succinic acid, adipic acid, 혹은 suberic acid와 titanium(IV) isopropoxide 촉매하에서 170, 190, 또는 $220^{circ}C$에서 축합중합 시켜 분자구조가 규칙적으로 배열된 새로운 지방족 폴리에스테르와 무질서한 구조를 갖는 폴리에스테르를 각각 얻었다. 이들 지방족 폴리에스테르들의 유리전이온도($T_g$)는 -40에서 $30^{circ}C$ 사이였다. 또한 $170^{circ}C$에서 제조된 분자구조가 규칙적으로 배열된 폴리에스테르가 높은 온도에서 합성된 구조가 무질서한 폴리에스테르들보다 $T_g$가 $5-10^{circ}C$ 정도 높았다. 체외분해 실험 결과, 분자구조가 규칙적으로 배열된 폴리에스테르가 불규칙한 중합체보다 완충용액 속에서 가수분해속도가 느렸다.

• Applied Microscopy
• /
• 제27권1호
• /
• pp.101-109
• /
• 1997

La이 첨가되고 또한 첨가되지 않은 $Pb(Mg_{1/3}Nb_{2/3})O_3$ 고용체에서 Mg과 Nb의 비화학양론적인 구조 규칙화 현상이 고분해능 전자현미경과 컴퓨터 이미지 시뮬레이션에 의해 연구되었다. 고분해능 격자 이미지는 여러 이미지 형성 조건과 대물렌즈 구경에서 얻었다. 컴퓨터 이미지 시뮬레이션은 여러 시편 두께, 초점 거리, 장거리 규칙도에서 실시되었다. 규칙격자 구조를 가지는 영역의 격자 이미지는 장거리 규칙도에 크게 의존되는 것이 발견되었다. 규칙격자 구조를 가지는 영역에 있어서, 실험 격자 이미지와 컴퓨터 시뮬레이션 이미지의 비교로부터, 규칙격자 구조를 가지는 영역의 장거리 규칙도는 $0.2\sim0.7$의 간을 가지고 있는 것이 관찰되었다. 또한 규칙격자는 $(NH_4)_3FeF_6$ 결정구조를 가지고 있었다.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2427-2434
• /
• 2022

Series of unequal quantity Nd/Ce co-doped ceramic nuclear waste forms, (Gd, Nd)₂(Zr, Ce)₂O₇, were prepared to tailor its ordered pyrochlore or disordered fluorite structure. The phase transition, microtopography, and elemental composition of the ceramic samples were systematically investigated, especially the effect of order-disorder structure on the chemical stability. It was confirmed that unequal quantity of Nd/Ce could synchronously replace the Gd/Zr-sites of Gd₂Zr₂O₇. And the phase transition of order-disorder structure could be successfully tailored by regulating the average cationic radius ratio of (Gd, Nd)₂(Zr, Ce)₂O₇ series. The elements of Gd, Nd, Zr, and Ce are uniformly distributed in the ordered or disordered structures. The MCC-1 leaching results showed that (Gd, Nd)₂(Zr, Ce)₂O₇ pyrochlore ceramic nuclear waste forms had excellent chemical stability, whose elements' normalized leaching rates were as low as 10^-4-10^-7 g·m^-2·d^-1 after 7 days. In particular, the chemical stability of disordered structure was superior to that of ordered structure. It was proposed that the force constant and the closest packing were changed with the structure transformation resulting the chemical stability difference.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.191-195
• /
• 2008

Highly ordered silver nanowire with a diameter of 10 nm was arrayed by electroless deposition in a porous anodic aluminum oxide(AAO) membrane. The AAO membrane was fabricated electrochemically in an oxalic acid solution via a two-step anodization process, while growth of the silver nanowire was initiated by using electroless deposition at the long-range-ordered nanochannels of the AAO membrane followed by thermal reduction of a silver nitrate aqueous solution by increasing the temperature up to $350^{\circ}C$ for an hour. An additional electro-chemical procedure was applied after the two-step anodization to control the pore size and channel density of AAO, which enabled us to fabricate highly-ordered silver nanowire on a large scale. Electroless deposition of silver nitrate aqueous solution into the AAO membrane and thermal reduction of silver nanowires was performed by increasing the temperature up to $350^{\circ}C$ for 1 h. The morphologies of silver nanowires arrayed in the AAO membrane were investigated using SEM. The chemical composition and crystalline structure were confirmed by XRD and EDX. The electroless-deposited silver nanowires in AAO revealed a well-crystallized self-ordered array with a width of 10 nm.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1269-1270
• /
• 2006

Mg-Zn-RE alloys had a novel lond period stacking ordered (LPO) structure. Their rapidly solidified powder metallurgy (RS P/M) alloys exhibited a combination of high strength and god ductility (tensile yield strength above 550 MPa and elongation above 5%). The LPO Mg-Zn-RE RS P/M alloys had high elevated temperature strength (tensile yield strength above 380 MPa at 473 K) and exhibited a high-strain-rate superplasticity at higher temperatures. In Japan, a national project for developing high strength LPO Mg-Zn-RE RS P/M alloys has started at 2003 for 5 years, which is founded by the Ministry of Economy, Trade and Industry (METI) of Japan. In the national project, project targets in materials performances have been achieved. The developed LPO Mg-Zn-RE RS P/M alloys exhibited higher tensile yield strength, fatigue strength and corrosion resistance than high strength aluminum alloys of extra-super-duralumin (7075-T6).

• ETRI Journal
• /
• 제13권4호
• /
• pp.25-34
• /
• 1991

The stability and the electronic structure of $In_0.5$.$Ga_0.5$P-based superlattices are examined through self-consistent ab initio pseudopotential calculations. A chalcopyrite-like structure is found to be the lowest energy state over (001) and (111) monolayer superlattices (MLS). Our calculations indicate that all the ordered structures in bulk form are unstable against phase segregation into binary constituents at T = 0 while for epitaxial growth, the chalcopyrite phase is stabilized. The fundamental band gaps of the ordered structures are found to be direct and smaller than that of disordered alloys. The lowering of the band gap is explainable by band folding and pushing effects. We find the reduction of the band gap to be largest for the (111) MLS.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2247-2254
• /
• 2010

The surface structures of copper phthalocyanine (CuPc) thin films deposited on sulphur-passivated and plane perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA)-covered InAs(100) surfaces have been studied by low energy electron diffraction (LEED) and van der Waals (vdW) intermolecular interaction energy calculations. The annealing to $300^{\circ}C$ and $450^{\circ}C$ of $(NH_4)_2S_x$-treated InAs(100) substrates produces a ($1{\times}1$) and ($2{\times}1$) S-passivated surface respectively. The CuPc deposition onto the PTCDA-covered InAs(100) surface leads to a ring-like diffraction pattern, indicating that the 2D ordered overlayer exists and the structure is dominantly determined by the intermolecular interactions rather than substrate-molecule interactions. However, no ordered LEED patterns were observed for the CuPc on S-passivated InAs(100) surface. The intermolecular interaction energy calculations have been carried out to rationalise this structural difference. In the case of CuPc unit cells on PTCDA layer, the planar layered CuPc structure is more stable than the $\alpha$-herringbone structure, consistent with the experimental LEED results. For CuPc unit cells on a S-($1{\times}1$) layer, however, the $\alpha$-herringbone structure is more stable than the planar layered structure, consistent with the absence of diffraction pattern. The results show that the lattice structure during the initial stages of thin film growth is influenced strongly by the intermolecular interactions at the interface.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1995년도 추계 학술발표회
• /
• pp.124-125
• /
• 1995

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2445-2448
• /
• 2007

Self-assembled monolayers (SAMs) were formed by adsorption of thioacetyl-terminated tolanethioacetate (TTA) on Au(111) in a 0.5-mM ethanol solution after one day immersion at room temperature. Molecular-scale STM imaging revealed that the TTA SAMs were composed of two mixed phases; an ordered phase with small domains describing a ( × 2 )R30° structure and a disordered phase. Interestingly, after annealing the precovered TTA SAMs on Au(111) at 90 °C for 1 h, the small ordered domains grew unidirectionally, resulting in the formation of unique rod-like domains, which were assigned a ( × 2 )R7° structure. These results will be very useful in understanding the formation and thermal behavior of TTA SAMs on gold surfaces.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.227-233
• /
• 2016

In order to make a highly ordered three-dimensional porous structure of titania ceramics, porogen beads of PS [Polystyrene] and PMMA [poly(methylmetacrylate)] were prepared by emulsion polymerization using styrene monomer and methyl methacrylate monomer, respectively. The uniform beads of PS or PMMA latex were closely packed by centrifugation as a porogen template for the infiltration of titanium butoxide solution. The mixed compound of PS or PMMA with titanium butoxide was dried and the dry compacts were calcined at $450^{\circ}C-750^{\circ}C$ according to the firing schedule to prepare micro- and meso- structures of polycrystalline titania with monodispersed porosity. Inorganic frameworks composed of $TiO_2$ were formed and showed a three Dimensionally Ordered Microstructure [3DOM] of $TiO_2$ ceramics. The pulverized particles of the $TiO_2$ ceramic skeleton were characterized using XRD analysis. A monodispersed crystalline micro-structure with micro/meso porosity was observed by FE-SEM with EDX analysis. The 3DOM $TiO_2$ skeleton showed opalescent color tuning according to the direction of light.