• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.242-246
• /
• 2004

FePt nanoparticles for high-density magnetic recording media were synthesized by the simultaneous chemical reduction of Fe(acac) $_2$ and Pt(acac) $_2$ with 1,2-hexadecanediol as the reducing reagent. TEM images showed that the shape of as-synthesized FePt nanoparticle was spherical and average particle size was 3 nm. Also, SAD pattern showed that crystal structure was disordered FCC (face centered cubic). These FCC structured nanoparticles were transformed FCT (face centered tetragonal) structure by annealing at 55$0^{\circ}C$ for 30 min in Ar atmosphere. XRD analysis revealed that as-synthesized FePt nanoparticles were transformed from disordered FCC to ordered FCT. Finally, the coercivity of 2 kOe for FePt nanoparticles with FCT structure was obtained by VSM measurement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.49-53
• /
• 1996

Crystal structures of N $a_{x}$W $O_3$(0.5$\leq$x$\leq$1.0) were investigated. Transmission electron microscopy (TEM) studies indicate that there is an ordering of sodium ions when x=0.75. The direction of ordering is [110] and the wavelength of ordering is twice of the interplanar distance of (110) plane. It has been confirmed that a superlattice containing eight N $a_{0.75}$W $O_3$is the unit cell of ordered structure. In this unit cell, Na sites at (100) and ($\frac{1}{2}$$\frac{1}{2}$$\frac{1}{2}$) are vacant. The ordered phase was preserved after the annealing at $600^{\circ}C$ in the air. In reduced N $a_{x}$W $O_3$with x=0.5 and 1.0, extra phases were found to coexist with the partially ordered perovskite phase. After annealing at $600^{\circ}C$, theses phases were transformed into the phases found in calcined specimens.ens.s.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.901-904
• /
• 2010

Decylthiocyanate (DTC) self-assembled monolayers (SAMs) on Au(111) were prepared by solution and vapor phase deposition methods at $50^{\circ}C$ for 24 h. The formation and surface structure of DTC SAMs were examined using scanning tunneling microscopy (STM). STM imaging revealed that DTC SAMs formed in 1 mM ethanol solution at $50^{\circ}C$ were composed of small ordered domains with lateral dimensions of a few nanometers and disordered phases, whereas DTC SAMs formed in the vapor phase at $50^{\circ}C$ contained two ordered phases: a closely packed c($4{\times}2$) superlattice and a striped phase with an interstripe spacing of 2.6 - 2.8 nm. It was also found that the ordered domain and vacancy island formation for DTC SAMs on Au(111) differs significantly from that of decanethiol SAMs, suggesting that adsorption mechanism is different from each other. From this study, it was confirmed that DTC SAMs with a high degree of structural order can be obtained by vapor phase deposition.

• 한국결정성장학회지
• /
• 제12권1호
• /
• pp.36-41
• /
• 2002

$H_2$(5%)/Ar의 환원분위기에서 $900^{\circ}C$ 이상의 온도로 소결함으로써 화학양론적인 조성비를 만족하면서 이중 페롭스카이트 구조를 갖는 $Sr_2FeMoO_6$ (SFMO) 소결체를 제조하였다. SFMO 소결체는 우수한 강자성 특성을 나타내었고 8K에서 15%와 상온에서 3% 정도의 자기저항비를 나타내었다. 이 SFMO 소결체를 타겟으로하여 스퍼터링법으로와의 단결정 기판 위에 비정질 SFMO 박막을 증착한 후, 적절한 H$_2$(5%)/Ar의 환원분위기, $680^{\circ}C$ 이상) 열처리 조건의 고상결정법으로 이중 페롭스카이트 구조의 다결정 SFMO 박막을 제조하였다. 이 SFMO 박막은 강자성 특성을 잘 나타내었으나, 자기저항 특성은 상온에서는 나타나지 않았고 8K에서 약 0.3-0.5%의 자기저항비를 나타내었다. 이와같이 박막의 경우 자기저항 특성이 떨어지는 이유는 제조된 SFMO 박막이 화학양론비를 만족하지 못하고 조직의 치밀도가 떨어져서 결정립 사이에서 발생하는 자기스핀 터널링이 제대로 발생하지 못하였기 때문이라 생각되었다.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.63-77
• /
• 1998

The oxidation of NiAl(110) was investigated in the temperature regime between 300K and 1300 K using LEED (low energy electron diffraction), TPD (temperature programmed desorption) and HREELS (high resolution electron energy loss spectroscopy). The adsorption of N2O and O2 up to reconstructions. Stepwise annealing of the oxygen-saturated sample from 600 K to 1300K in UHV (ultra-high vacuum,) results in firstly the onset of randomly oriented then finally fairly well-ordered. 5 ${\AA}$ Al2O3 film with quasi-hexagonal periodicity. Ordered thicker oxide films of 18-30 ${\AA}$ seem to be grown on this interfacial oxide layer by direct oxidation of sample at elevated temperature between 1150 and 1300 K because of the LEED pattern consisting of new broad hexagonal spots and the previous 5 ${\AA}$ spots. Although the periodicity of surface oxygen arrays shows no significant change from an hexagonal close-packing, the O-O distance changes from ∼3.0 ${\AA}$ film to ∼2.9 ${\AA}$ for thicker oxides. with the appearance of Auger parameter, for the 5${\AA}$ film can be described better as an interfacial oxide layer. The observation of three symmetric phonon peaks can be also a supporting evidence for this phase assignment since thicker oxide films on the Same Ni2Al3(110) show somewhat different phonon structure much closer to that of the ${\gamma}$-Al2O3. The adsorption/desorption of methanol further proves the preparation of less-defective and/or oxygen-terminated Al2O3 films showing ordered phase transitions with the change of oxide thickness between 5 ${\AA}$ to 30 ${\AA}$.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.579-584
• /
• 1998

In this work, we present a method to deal with the interval valued decision making systems. First, we propose a new type of equality measure based on the Ordered Weighted Averaging (OWA) operator. The proposed equality measure has a structure to render the extreme values of the measure by choosing a suitable weighting vector of the OWA operator. From this property, we derive a bidirectional fuzzy inference network which can be applied for the decisionmaking systems requiring the inverval valued decisions.

• Macromolecular Research
• /
• 제17권4호
• /
• pp.280-283
• /
• 2009

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.309-314
• /
• 2006

The linear Consecutive-k-out-of-n:F system consists of n component ordered linearly and fail if and only if at least k consecutive components fail. We assume that the components are independent and identical exponentially distributed. This paper develops a model to calculate the expected cost per unit time of a linear consecutive-k-out-of-n:F system. The optimization problem we consider regards the choice of the system structure parameter k to minimized the expected cost per unit time.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.187-193
• /
• 2006

This paper shows how to use continuation-ratio logits for the analysis of structured polytomous data. Here, response categories are considered to have a nested binary structure. Thus, conditionally nested binary random variables can be defined in each step. Two types of factors are considered as independent variables affecting response probabilities. For the purpose of analyzing categorical data with binary nested strutures a continuation-ratio mixed model is suggested. Estimation procedure for the unknown parameters in a suggested model is also discussed in detail by an example.

• Journal of Magnetics
• /
• 제7권1호
• /
• pp.1-3
• /
• 2002

Piezomagnetic behaviors have been observed far above the Neel temperature in the perovskite-type layer structure compound $(C_{18}H_{37}NH_3)_2MnCl_4$undergoing structural phase transitions. Our observations were well explained by the magnetic and the structural orders coupled together via a magnetostructural coupling attributable to the Dzyaloshinsky-Moriya interaction.