• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1339-1347
• /
• 2014

This study were performed on roadside buffer green in Songpa-dong, Songpa-gu, Seoul in order to analyze the anion concentration according to the type of composition of roadside buffer green. Buffer green separating the physical structure of the measurement points and measurement locations were separated by roadside, green interior, the other side of the road. planting density and deposit of trees per each buffer green was measured in the order of mounding type> slope type> the plain type. If the measured temperature of the location-specific weather elements roadside> inside> the other side of the road in order of measurement and the temperature is lowered farther away from the road. If the relative humidity of the road on the other side> inside> the roadside in order to measure and this is the opposite of the temperature tendency. According to physical structure reduction of the temperature on the other side of the road and roadside in order of mounding type> the plain type> slope type was measured. As a result of measuring a anion therefore concentration of the anion inside of melt is in order of mounding type> the plain type> slope type, tended to match the melt characteristics. According to measured positions anion concentration is in the order of the other side of the road> inside> the roadside was measured. As a result of correlation analysis, in the case of measurement location-specific weather and anions the temperature is positive correlation, relative humidity is negative correlation and that's results of previous studies were supported.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2137-2138
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.886-889
• /
• 1997

The crystal structure and optical properties of copper nanoparticles, prepared in fused silica by ion-implantation and subsequent heat-treatment, were characterized by X-ray, TEM, linear absorption, and degenerate four-wave mixing (DFWM) technique. The X-ray data show fcc lattice structure of the nanocrystals and their size was measured as 8-20 nanometer by high resolution TEM. Using DFWM, the third-order nonlinear optical coefficient of the Cu-SiO2 thin films was measured as 0.4-1.1×10-8 esu in the surface plasmon resonance absorption region (540-570 nm).

• Ocean Systems Engineering
• /
• v.3 no.1
• /
• pp.35-53
• /
• 2013

In this study, a hybrid floating structure with cylinder was introduced to reduce the hydrodynamic motions of the pontoon type. The hybrid floating structure is composed of cylinders and semi-opened side sections to penetrate the wave impact energy. In order to exactly investigate the hydrodynamic motions and structural behavior of the hybrid floating structure under the wave loadings, integrated analysis of hydrodynamic and structural behavior were carried out on the hybrid floating structure. Firstly, the hydrodynamic analyses were performed on the hybrid and pontoon models. Then, the wave-induced hydrodynamic pressures resulting from hydrodynamic analysis were directly mapped to the structural analysis model. And, finally, the structural analyses were carried out on the hybrid and pontoon models. As a result of this study, it was learned that the hybrid model of this study was showed to have more favorable hydrodynamic motions than the pontoon model. The surge motion was indicated even smaller motion at all over wave periods from 4.0 to 10.0 sec, and the heave and pitch motions indicated smaller motions beyond its wave period of 6.5 sec. However, the hybrid model was shown more unfavorable structural behavior than the pontoon model. High concentrated stress occurred at the bottom slab of the bow and stern part where the cylinder wall was connected to the bottom slab. Also, the hybrid model behaved with the elastic body motion due to weak stiffness of floating body and caused a large stress variation at the pure slab section between the cylinder walls. Hence, in order to overcome these problems, some alternatives which could be easily obtained from the simple modification of structural details were proposed.

• 전기의세계
• /
• v.30 no.12
• /
• pp.822-831
• /
• 1981

Many different schemes of the adaptive observer and controller have been developed for both continuous and discrete systems. In this paper we have presented a new scheme of the reduced order adaptive observer for the single input discrete linear time invariant plant. The output equation of the plant, is transformed into the bilinear form in terms of system parameters and the states of the state variable filters. Using the plant output equation the discrete implicit adaptive observer based on the similar philosophy to Nuyan and Carroll is derived and the parameter adaptation algorithm is derived based on the exponentially weighted least square method. The adaptive model following control system is also constructed according to the proposed observer scheme. The proposed observer and controller are rather than simple structure and have a fast adaptive algorithm, so it may be expected that the scheme is suitable to the practical application of control system design. The effectiveness of the algorithm and structure is illustrated by the computer simulation of a third order system. The simulation results show that the convergence speed is proportinal to the increasing of weighting factor alpha, and that the full order and reduced order observer have similar convergence characteristics.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.1
• /
• pp.141-157
• /
• 1997

The structure and dimensionality of the User Information Satisfaction (UIS) construct is an important theoretical issue that received considerable attentions. The acceptance of UIS as a standardized instrument requires confirmation that it explains and measures the user information satisfaction construct and its component. Based on a simple of 670 respondents who participated in dealing with the Public Management Information System (PMIS), this research used a confirmatory factor analysis to test the alternavtive models of underlying factor structure and assessed the reliability and validity of these factors and items in the PMIS. The result provided a support for a revised UIS model with four first-order factors and one PMIS The result provided a support for a revised UIS model with four first-order factors and one second-order (higher-order) factor in PMIS. To cross-validata these results, the author reexamined two prior data sets. The results showed that the revised model provides better model-data fit in all three data sets.

• BMB Reports
• /
• v.54 no.5
• /
• pp.233-245
• /
• 2021

In eukaryotes, the genome is hierarchically packed inside the nucleus, which facilitates physical contact between cis-regulatory elements (CREs), such as enhancers and promoters. Accumulating evidence highlights the critical role of higher-order chromatin structure in precise regulation of spatiotemporal gene expression under diverse biological contexts including lineage commitment and cell activation by external stimulus. Genomics and imaging-based technologies, such as Hi-C and DNA fluorescence in situ hybridization (FISH), have revealed the key principles of genome folding, while newly developed tools focus on improvement in resolution, throughput and modality at single-cell and population levels, and challenge the knowledge obtained through conventional approaches. In this review, we discuss recent advances in our understanding of principles of higher-order chromosome conformation and technologies to investigate 4D chromatin interactions.

• International journal of advanced smart convergence
• /
• v.13 no.2
• /
• pp.1-6
• /
• 2024

Reconfiguration and miniaturization of antennas have become key attributes in modern wireless communication systems. Reconfiguration of radiation pattern can alleviate the problems encountered in modern wireless communication systems such as multi-path problems. Physical limitation of miniaturization also can be overcome by using a zeroth-order resonance (ZOR) antenna based on metamaterial. In order to achieve reconfiguration and miniaturization of antennas at the same time, we propose a new pattern reconfigurable zeroth-order resonance (ZOR) antenna that reconfigures the radiation patterns by varying the position and the number of unit cells comprising the antenna. The antenna is fabricated in an equilateral triangular shaped symmetrical structure to increase pattern variety. This structure can easily provide eight different radiation patterns (two omnidirectional and six monopole like patterns).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4307-4325
• /
• 2016

With the aim of solving the problems of long processing times, high memory consumption and low event throughput in the current processing approaches in out-of-order RFID event streams, an efficient complex event processing method based on INFA-HTS (Improved Nondeterministic Finite Automaton-Hash Table Structure) is presented in this paper. The contribution of this paper lies in the fact that we use INFA and HTS to successfully realize the detection of complex events for out-of-order RFID event streams. Specifically, in our scheme, to detect the disorder of out-of-order event streams, we expand the traditional NFA model into a new INFA model to capture the related RFID primitive events from the out-of-order event stream. To high-efficiently manage the large intermediate capturing results, we use the HTS to store and process them. As a result, these problems in the existing methods can be effectively solved by our scheme. The simulation results of our experiments show that our proposed method in this paper outperforms some of the current general processing approaches used to process out-of-order RFID event streams.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.1
• /
• pp.49-56
• /
• 2010

The purpose of this study is to examine the relationship between the structural system used in modern architecture and the form and spatial composition of the buildings. The principle in stabilization of structures is closely related to the architectural form. That is, in order to stabilize a building, a special type of structural system is required and consequently shows up with consistent characteristics in the architectural form. Modern architecture can be classified into skeleton structure, trusses structure, and space structure according to the structural characteristics. Skeleton structure is then divided into a perpendicular form and tapered form. Trusses structure is categorized as dome-shaped structure and slab-shaped structure, and space structure can be divided into compressible space structure and tensile space structure. When classifies the modern building with the aspect of architectural effect, there is a possibility of trying to divide with effect of production, and its expression. Effect of production mean structural system and effect of expression mean space and plan.