• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.13-13
• /
• 2018

The anti-inflammatory (INF) compounds (1-15) were isolated from Agrimonia pilosa Ledeb. (APL) by activity-guided isolation technique. The isolated compounds (1-15) were identified as quercetin-7-O-rhanmoside (1), apigenin-7-O-glycoside (2), kaempferol-7-O-glycoside (3), apigenin-7-O-[6"-(butyl)-glycoside] (4), querceitn (5), kaempferol (6), apigenin (7), apigenin-7-O-[6"-(pentyl)-glycoside] (8), agrimonolide (9), agrimonolide-6-O-glucoside (10), desmethylagrimonolide (11), desmethylagrimonolide-6-O-glucoside (12), luteolin (13), vitexin (14) and isovitexin (15). Flavonoids, compound 2, 3, 11, and 14-15 have been found in APL for the first time. Furthermore, two novel flavone derivatives, compound 4 and 8, have been isolated inceptively in plant. In the no cytotoxicity concentration ranges of $0-20{\mu}M$, nitric oxide (NO) production level of 1-15 was estimated in LPS-treated Raw 264.7 macrophage cells. The flavone aglycones, 7 (apigenin, $IC_{50}=3.69{\pm}0.34{\mu}M$), 13 (luteolin, $IC_{50}=4.62{\pm}0.43{\mu}M$), 6 (kaempferol, $IC_{50}=14.43{\pm}0.23{\mu}M$) and 5 (quercetin, $IC_{50}=19.50{\pm}1.71{\mu}M$), exhibited excellent NO inhibitory (NOI) activity in dose-dependent manner. In the structure activity relationship (SAR) study of apigenin-derivatives (APD), apigenin; Api, apigenin-7-O-glucoside; Api-G, apignenin-7-O-[6"-(butyl)-glycoside]; Api-BG and apignenin-7-O-[6"-(pentyl)-glycoside]; Api-P, from APL on INF activity was investigated. The INF mediators level such as NO, INF-cytokines, NF-KB proteins, iNOS and COX-2 were sharply increased in Raw 264.7 cells by LPS. When pretreatment with APD in INF induced macrophages, NOI activity of Api was most effective than other APD with $IC_{50}$ values of $3.69{\pm}0.77{\mu}M$. And the NOI activity was declined in the following order: Api-BG ($IC_{50}=8.91{\pm}1.18{\mu}M$), Api-PG ($IC_{50}=13.52{\pm}0.85{\mu}M$) and API-G ($IC_{50}=17.30{\pm}0.66{\mu}M$). The NOI activity of two novel compounds, Api-PG and Api-BG were lower than their aglycone; Api, but more effective than Api-G (NOI: Api-PG and Api-BG). And their suppression ability on INF cytokines such as $TNF-{\alpha}$, $IL-1{\beta}$ and IL-6 mRNA showed the similar tendency. Therefore, the anti-INF mechanism study of Api-PG and Api-BG on nuclear factor-kappa B ($NF-{\kappa}B$) pathway, representative INF mechanism, was investigated and Api was used as positive control. Api-BF was more effectively prevent the than phosphorylation of $pI{\kappa}B$ kinase (p-IKK) and p65 than Api-PG in Raw 264.7 cells. In contrast, Api-PG and Api-BG were not reduced the phosphorylation of inhibitor of kappa B alpha ($I{\kappa}B{\alpha}$). Moreover, pretreatment with Api-PG and Api-BG, dose-dependently inhibited LPS-induced expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) mRNAs and proteins in macrophage cells, and their expression were correlated with their NOI activity. Therefore, APL can be utilized to health promote agent associated with their AIN metabolites.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.459-468
• /
• 2014

Groyne to control the direction and velocity of flow in rivers is generally installed for the purpose of protecting riverbanks or embankments from erosion caused by running water. In particular, as interest in river restoration and natural river improvement increases, groynes are proposed as a key hydraulic structure for local flow control and riparian habitat establishment. Groynes are installed mainly in groups rather than as individual structures. In case of groynes installed as a group, flow around the groynes change according to spacing in between the groynes. Therefore, groyne spacing is regarded as the most important factor in groyne design. This study aimed at examining changes of flows around and within the area of groynes that take place according to the spacing of groynes installed in order to propose the optimal spacing for upward groynes. To examine flow characteristics around groynes, this study looked at flows in main flow area and recirculation flow area separately. In main flow area, it examined the impact of flow velocity increasing as a result of conveyance reduction that is exerted on river bed stability in relation to changes in the maximum flow velocity according to installation spacing. As a factor causing impacts on scouring and sedimentation within the area of groynes, recirculation flow in the groyne area can lead problems concerning flow within the area and stability of embankment. As for recirculation area, an analysis was conducted on the scale of rotational flow and the flow around embankment that exerts impacts on stability of the embankment. In addition, a comparative analysis was carried with reference to changes of the central point of rotational flow that occur within the area of groynes. As a result of compositely examining the results, the appropriate installation spacing is proposed as min. four times-max. six times considering a decrease in flow velocity according to the installation of upward groynes, river bed stability and stability of embankments against counterflow within the area of groynes.

• Journal of the Korean earth science society
• /
• v.25 no.5
• /
• pp.336-347
• /
• 2004

This study investigated the effects of the application of a variety of ICTs cause the effects on self-directed learning capability, creativity and problem-solving ability. In order to achieve the above aim, Web-Based Instructions(WBI) and instructions using CD-ROM Titles for the unit of 'the solar system and the galaxy' were applicated and analyzed which belongs to the area of 'the earth' in the subject 'science' for high school students. Instructions using WBI materials and CD-ROM titles were found to be effective on 'self-conception', 'creativity', 'future inclination', 'self-assessment ability', 'openness' and' initiative' improvement all of which belong to self-directed learning characteristics. They did not, however, show meaningful effect on improving 'learning eagemess' and 'responsibility' improvement. On looking into self-directed learning characteristics according to prerequisite learning levels, both groups and these for instruction using CD-ROM learning materials were found to have no effect on interaction. With respect to problem-solving ability improvement which is characteristic of the instruction using ICTs, WBI proved more fruitful than instruction using CD-ROM titles on improving scholastic achievement level. WBI was effective on 'fluency', 'originality' and 'resistance to premature closure'. It on the other hand, was of no use on 'abstraction of titles' and 'elaborateness' These results came from the following characteristics: WBI came into effect on 'fluency' and 'originality' in the areas of variety and vitality, which are characteristic of WBI. In the area of resistance to premature closure WBI was effective on organizing learning contents owing to the animation of picture materials which are variously presented in the web site. As a result of WBI questionnaire about WBI, an excellent effect on the structure of display, quantity of information, indication and instruction, supplementary study and further study were discussed.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.239-244
• /
• 2007

In order to investigate the effect of fluorine ion in the $Li_{1-x}FeO_2Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8) cathode material, it was synthesized $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.05{\le}y{\le}0.15$) cathode materials at $350^{\circ}C$ for 10hrs using solid-state method. $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.0{\le}y{\le}0.1$ was composed many large needle-like particles of about $1-1.5\;{\mu}m$ and small particles of about 50-100 nm, which were distributed among the larger particles. However, $Li_{1-x}FeO_{1.85}F_{0.15}-Li_xMnO_2$ material showed slightly different particle morphology. The particles of $Li_{1-x}FeO_{1.85}F_{0.15}-Li_xMnO_2$ were suddenly increased and started to be a spherical type of particle shape. $Li/Li_{1-x}FeO_{1.9}F_{0.1}-Li_xMnO_2$ cell showed a high initial discharge capacity of 163 mAh/g and a high cycle retention rate of 95% after 50 cycles. The initial discharge capacity of $Li/Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ ($0.05{\le}y{\le}0.15$) cells increased according to the increase of F content. However, the cycleability of this cell was very rapidly decreased when the substituted fluorine content is over 0.1. We suggested that too large amount of F ion fail to substitute into the $Li_{1-x}FeO_2-Li_xMnO_2$ structure, which resulted in the severe decline of battery performance.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.338-350
• /
• 1988

In order to solve the taxonomic problems of the genus Juniperus growing in South Korea, an identification key of the genus and species was developed bayed un flower structure, cane and seed shape, branching habit, tree form, leaf characteristics etc. of the 7 native species and the a exotic cultivars. The typical pattern of karyotype found by chromosome analysis of the species was used for the identification among morphologically similar species. The length of chromosome were ranged $9{\sim}15{\mu}m$ in all studied specie. J. chinensis, var. procumbens, and var. kaizuka sere tetraploid, 4n=44, var. globosa, var. procumbens, var. horizontalis, J. virginiada, J. rigida, J. rigida var. longicarpa, and J. coreana were diploid, 2n=22. The species in the Sabina section showed large variation in the length of chromosome and kinetochore position. The species in the Oxycedrus section showed the cytological characteristics that the 11th chromosome t-type(acrocentric), and the m-type abundant chromosome set was relatively uniform as compared to those of the Sabina section. The species in the Sabina section, which are planted in the large city area, show great morphological variation because many different ecotypes were mixed and often crossed among them. In summary, this study was able to make clear identification and to find out similarity among Juniperus, species by the morphological and cytological analysis.

• Journal of the Korean Geographical Society
• /
• v.47 no.1
• /
• pp.60-78
• /
• 2012

The main objective of this study is to conduct subnational population projections of Korea based on a Myriad Things" (萬物門), which is part of Seongho's representative work entitled $Miscellaneous$ $Explanations$ $of$ $Seongho$ (星湖僿說), has been in this paper in order to understand Seongho's "thinking on geography". To do so, contents related to geography were selected and these were discussed and interpreted in terms of the classification system of today's geographical knowledge. Following is the result of this research. First, information on astronomical geography and natural geography such as uplift, tornado, structure of soil, and the $yut$ board as well as humangeographical topics such as wild $ginseng$, cigarettes, hot pepper, traditional fruits and nuts (chestnuts, jujubes, and persimmons), Goryeo paper (Korean paper), mulberry trees, cotton plants, natural dye, policy about horses, magnetic compass needles, and farming implements for rice transplantation are mentioned in "Myriad Things" in relation to geography. Second, the depth of information described varies from topic to topic, but the topics on tornado and magnetic compass needles, horses, wild ginseng, traditional fruits and nuts, and $yut$ board are described in depth and in detail. Third, authenticity of the contents on these topics are "true" insofar as bibliographical information and citations are provided for support. Fourth, these topics reflect the interests and circumstances that are related to the "economic improvement of common people's livelihood" in those days, such as agriculture, crops, and transportation of goods. Fifth, the bibliography and citations explaining all instances reveal that China (Qing) is a great civilization of the advanced world and that the scholarship of Joseon relied on and accepted it. Sixth, except for horse raising and management, farming implements for rice transplantation, sericulture, and natural dying of cloth, most of the topics are useful even today. In short, theres is a profound aspect to the content that makes it possible to estimate the "geographical thinking". In general, the focus of the content of this book directly linked to the practical agricultural economy of the common people.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.4
• /
• pp.91-117
• /
• 2007

This study was to compare the contents and practical problems addressed, the process of teaching-learning method, and evaluation method of Korean Home Economics curriculum and of the Oregon and Ohio's Practical Problem Focused Family & Consumer Sciences Curricula. The results are as follows. First, contents of Korean curriculum are organized by major sub-concepts of Home Economics academic discipline whereas curricular of both Oregon and Ohio states are organized by practical problems. Oregon uses the practical problems which integrate multi-subjects and Ohio uses ones which are good for the contents of the module by integrating concerns or interests which are lower or detailed level (related interests). Since it differentiates interest and module and used them based on the basic concept of Family and Consumer Science, Ohio's approach could be easier for Korean teachers and students to adopt. Second, the teaching-learning process in Korean home economics classroom is mostly teacher-centered which hinders students to develop higher order thinking skills. It is recommended to use student-centered learning activities. State of Oregon and Ohio's teaching-learning process brings up the ability of problem-solving by letting students clearly analyze practical problems proposed, solve problems by themselves through group discussions and various activities, and apply what they learn to other problems. Third, Korean evaluation system is heavily rely on summative evaluation such as written tests. It is highly recommended to facilitate various performance assessment tools. Since state of Oregon and Ohio both use practical problems, they evaluate students mainly based on their activity rather than written tests. The tools for evaluation include project documents, reports of learning activity, self-evaluation, evaluation of discussion activity, peer evaluation in a group for each students for their performance, assessment about module, and written tests as well.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.159-172
• /
• 2010

The recommender system is one of the possible solutions to assist customers in finding the items they would like to purchase. To date, a variety of recommendation techniques have been developed. One of the most successful recommendation techniques is Collaborative Filtering (CF) that has been used in a number of different applications such as recommending Web pages, movies, music, articles and products. CF identifies customers whose tastes are similar to those of a given customer, and recommends items those customers have liked in the past. Numerous CF algorithms have been developed to increase the performance of recommender systems. Broadly, there are memory-based CF algorithms, model-based CF algorithms, and hybrid CF algorithms which combine CF with content-based techniques or other recommender systems. While many researchers have focused their efforts in improving CF performance, the theoretical justification of CF algorithms is lacking. That is, we do not know many things about how CF is done. Furthermore, the relative performances of CF algorithms are known to be domain and data dependent. It is very time-consuming and expensive to implement and launce a CF recommender system, and also the system unsuited for the given domain provides customers with poor quality recommendations that make them easily annoyed. Therefore, predicting the performances of CF algorithms in advance is practically important and needed. In this study, we propose an efficient approach to predict the performance of CF. Social Network Analysis (SNA) and Artificial Neural Network (ANN) are applied to develop our prediction model. CF can be modeled as a social network in which customers are nodes and purchase relationships between customers are links. SNA facilitates an exploration of the topological properties of the network structure that are implicit in data for CF recommendations. An ANN model is developed through an analysis of network topology, such as network density, inclusiveness, clustering coefficient, network centralization, and Krackhardt's efficiency. While network density, expressed as a proportion of the maximum possible number of links, captures the density of the whole network, the clustering coefficient captures the degree to which the overall network contains localized pockets of dense connectivity. Inclusiveness refers to the number of nodes which are included within the various connected parts of the social network. Centralization reflects the extent to which connections are concentrated in a small number of nodes rather than distributed equally among all nodes. Krackhardt's efficiency characterizes how dense the social network is beyond that barely needed to keep the social group even indirectly connected to one another. We use these social network measures as input variables of the ANN model. As an output variable, we use the recommendation accuracy measured by F1-measure. In order to evaluate the effectiveness of the ANN model, sales transaction data from H department store, one of the well-known department stores in Korea, was used. Total 396 experimental samples were gathered, and we used 40%, 40%, and 20% of them, for training, test, and validation, respectively. The 5-fold cross validation was also conducted to enhance the reliability of our experiments. The input variable measuring process consists of following three steps; analysis of customer similarities, construction of a social network, and analysis of social network patterns. We used Net Miner 3 and UCINET 6.0 for SNA, and Clementine 11.1 for ANN modeling. The experiments reported that the ANN model has 92.61% estimated accuracy and 0.0049 RMSE. Thus, we can know that our prediction model helps decide whether CF is useful for a given application with certain data characteristics.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2008

The samples were synthesized by using a solid state reaction. The X-ray diffraction pattern for $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ showed a pure rutile phase with tetragonal structure, Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at $870{\sim}930^{\circ}C$ for one day and then slowly cooled down to room temperature at a rate of $10^{\circ}C$/h. In order to obtain single phase material, it was necessary to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in evacuated and sealed quartz ampoule. Magnetic properties have been investigated using the vibrating sample magnetometer (VSM). Room temperature magnetic hysteresis (M-H) curve showed an obvious ferromagnetic behavior and the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $1.5\;{\mu}_B$/CoFe. But the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $0.02\;{\mu}_B$/CoFe without Ti-getter. Size of particles is about $1\;{\mu}m$ using the transmission electron microscope (TEM). The ingredients of sample are distributed irregular in particles. Only Fe get shown on the surface of particles.