• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.193-202
• /
• 1990

The purpose of this study was to compare the fithness, hardness and bending strength of the conventional reliners and visible light curing reliner. Nine regions were selected in the upper transverse section which were thought to be of interest from a clinical standpoint and the discrepancies between the dentures and the master cast in these regions were determined by the coordinated measuring machine(UMM-500, Zeiss, W. Germany). The results were as follows ; 1. The experimental denture bases showed the lowest fittness at the central portion of the posterior palatal border and the intimate contact in the buccal flanges regardless of relining materials and relining methods. 2. The fittness of relined denture base was the best in autopolymerizing group and in the order of long processing, short processing and visible light curing group. 3. The fittness after 24 hour-storage in water was improved in long processing and autopolymerizing groups, but there was no significant difference. 4. The hardness was the highest in long processing group and decreased in the order of short processing, visible light curing and autopolymerizing group. 5. The bending strength was the highest in long processing group and decreased short processing, visible light curing, and aotopolymerzing group in order.

• 한국임상보건과학회지
• /
• 제3권2호
• /
• pp.372-377
• /
• 2015

Purpose: The aim of this study is to compare total high order aberrations between surgery which uses TransPRK and general laser assisted sub-epithelial keratomileusis. Methods: The patients who had general laser assisted sub-epithelial and TransPRK laser assisted sub-epithelial by visiting ophthalmic clinic in Ulsan from January 2014 to August 2014 was researched. Results: When comparing total high order aberrations before and after operation, it was found that total high order aberration in general laser assisted sub-epithelial group increased to $0.222{\pm}0.078{\mu}m$ from $0.074{\pm}0.019{\mu}m$ while that in TransPRK assisted sub-epithelial group increased to $0.179{\pm}0.045{\mu}m$ from $0.076{\pm}0.032{\mu}m$. When comparing the increment in total high order aberrations between two groups after surgery, it was found that the increments of TransPRK assisted sub-epithelial group were statistically smaller than that of general laser assisted sub-epithelial group (p<0.05). Conclusions: This study made a comparative analysis of total high order aberrations between general laser assisted sub-epithelial and TransPRK assisted sub-epithelial which was introduced recently and the result showed a significant difference. The findings of this study suggest that TransPRK assisted sub-epithelial can be used widely in simply improving eye sight and quality of vision by reducing an increase in high order aberration caused by orthokeratology surgery. It is expected that TransPRK assisted sub-epithelial will be helpful for improving the understanding quality of eye sight which occurs by several methods of vision correction surgery.

• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.719-726
• /
• 1997

The aim of this study was to evaluate the in vitro effects of exposure to acidic beverages on microhardness of enamel and dentin. Thirty enamel specimens and thirty dentin specimens were obtained from extracted bovine maxillay incisiors. Enamel and dentin specimens were divided into three groups and treated with acidic beverages as follows; Group 1 : cola(pH 2.52), Group 2 : plain soda water(pH 2.93) and Group 3 : orange juice(pH 3.75). Erosive treatment was performed by storing each specimens for 5 min in 50ml solution of cola, soda water and orange juice. Average microhardness values(VHN) were determined before and after erosive treatment. All beverages produced significant loss of microhardness of enamel and dentin. Microhardness of enamel was reduced in the following order: Group 1 : $42.71{\pm}4.36(%)$, Group 2 : $37.09{\pm}6.25(%)$, Group 3 : $35.46{\pm}4.98(%)$. Microhardness of dentin was reduced in the following order: Group 1 : $17.14{\pm}3.42(%)$, Group 2 : $13.89{\pm}3.18(%)$, Group 3 : $13.82{\pm}3.50(%)$. The differences between group 1 and group 2, 3 were statistically significant(p< 0.05).

• Korean Journal of Mathematics
• /
• 제18권1호
• /
• pp.97-103
• /
• 2010

It is well known that the group ring K[G] has the nontrivial Jacobson radical if K is a field of characteristic p and G is a finite group of which order is divided by a prime p. This paper is concerned with the structure of the Jacobson radical of such a group ring.

• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.875-886
• /
• 2000

Let G denote either of the groups $GL_2(q)$ or $SL_2(q)$. Then ${\theta}$:G -> G given by ${\theta}(A)$ = ${(A^t)}^{-l}$, where $A^t$ denotes the transpose of the matrix A, is an automorphism of G. Therefore we may form the group G.$<{\theta}>$ which is the split extension of the group G by the cyclic group $<{\theta}>$ of order 2. Our aim in this paper is to find the complex irreducible character table of G.$<{\theta}>$.

• Journal of applied mathematics & informatics
• /
• 제16권1_2호
• /
• pp.303-306
• /
• 2004

There are 49 non-metacyclic p-groups of order less than 1000 with trivial Schur multiplier. In this paper we give a list of deficiency zero presentations for these groups.

• 한방비만학회지
• /
• 제2권1호
• /
• pp.13-23
• /
• 2002

Background & Methods: In order to study the effect of electro-lipolysis-acupuncture, 57 outpatients who have had herbal medication in Kirin Oriental Hospital were devided to two groups; acupuncture-treated group(46) vs non-acupuncture-treated group(11) Acupuncture-treated group was given electro-lipolysis-acupuncture at least two times a week and administered with herbal diet medication, whereas non-acupuncture-treated group was administered only with herbal diet medication. Results: Mean age, body weight and BMI of these two group at the start point of the treatment were $27.22({\pm}7.64)\;vs \;29.09({\pm}8.73),\;67.76({\pm}9.34)\;vs\;67.00({\pm}10.69),\;and\;26.20({\pm}3.02)\;vs\;26.14({\pm}4.10)$ in the order of acupuncture-treated and non-acupuncture groups. After one month of treatment, change rate of body weight, BMI, total fat, percentage of fat was significantly higher in acupuncture-treated group. Also the change rate of arm circumference, hip circumference and thigh circumference was significantly higher in acupuncture-treated group. The change rate of abdominal circumference and WHR of acupuncture-treated group was higher than that of non-acupuncture-treated group with no statistical significance. The circumference reduction rate according to herbal dieting program was higher in this order, abdomen, arms, chest, thighs and hips. On the other hand, chest circumference change rate over weight loss rate, which is the portion no acupuncture treatment was given to, and AMC change rate was higher in non-acupuncture-treated group. Conclusion: These results imply that herbal dieting program combined with electro-lipolysis-acupuncture is more effective on reducing body fat, size reduction of localized obesity and preservation of muscle than herbal prescription only dieting program.

• Kyungpook Mathematical Journal
• /
• 제62권4호
• /
• pp.769-772
• /
• 2022

Given a prime number p and a natural number m not divisible by p, we propose the problem of finding the smallest number r₀ such that for r ≥ r₀, every group G of order p^rm has a non-trivial normal p-subgroup. We prove that we can explicitly calculate the number r₀ in the case where every group of order p^rm is solvable for all r, and we obtain the value of r₀ for a case where m is a product of two primes.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.140-146
• /
• 2003

In this paper, the design of a channel filter and its group-delay-and-amplitude equalizer is carried out for the Ka-band satellite transponder subsystem. The 8th order dual-mode filter is employed for high selectivity around the band-edges with an elliptic-integral function response and has an in-line configuration. The 2-pole, reflection-type, group-delay equalizer is designed and manufactured to reduce the group-delay and amplitude variation, which can be large for such a high order filter. It is noted that in both the filter and equalizer, adopting the dual-mode coupling mechanism leads to less mass and volume. Through measurement, the performance of the realized group-delay-equalized filter is shown to meet the equipment requirements and to be appropriate for the satellite input multiplexer.

• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.1-19
• /
• 2003

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.