• 대한한방종양학회지
• /
• 제4권1호
• /
• pp.1-16
• /
• 1998

In order to investigate the effect of Bujaleejungtang, by means of oral medication to rats and mice, to isolated intestine and stomach, and the effect to pyloric ulcer, indomethacin-induced ulcer, secretion of gastric juice, and to transport ability of intestine content were studied as the action to G-I tract. The effect to normal rats and resperpine-treated rats were studied as the action to thermo-regulation. The results were as follows: 1. Bujaleejungtang showed the inhibitory effect on the smooth muscle contraction induced by acethylcholine chloride and barium chloride in the isolated mice ileum. 2. Bujaleejungtang showed inhibitory effect on the contraction induced by acetylcholine chloride and barium chloride in the rat fundus-strip. 3. Inhibitory effect of Bujaleejungtang on pyloric ulcer, indomethacin-induced gastric ulcer in rats was statistical recognized(p<0.05). 4. No inhibitory effect of Bujaleejungtang on gastric juice secretion in Shay rats was recognized. 5. Inhibitory effect of Bujaleejungtang on gastric free acidity and total acidity in Shay rats was recognized only when Bujaleejungtang was medicated in high thickness(2000mg/kg) (p<0.001). 6. Inhibitory effect of Bujaleejungtang on pepsin output in Shay rats was recognized only when Bujaleejungtang was medicated in high thickness(2000mg/kg)(p<0.001). 7. Inhibitory effect of Bujaleejungtang on barium sulfate transport in the small intestine of mice was recognized only when Bujaleejungtang was medicated in high thickness(2000mg/kg)(p<0.05). 8. Inhibitory effect of Bujaleejungtang on barium sulfate transport in the large intestine of mice was recognized(p<0.05). 9. Inhibitory effect of Bujaleejungtang on rectal temperature in normal rats was recognized. 10. Inhibitory effect of Bujaleejungtang on rectal temperature in reserpine-treated rats was recognized only when Bujaleejungtang was medicated in high thickness(2000mg/kg)(p<0.05).

• 대한치과보철학회지
• /
• 제45권1호
• /
• pp.60-70
• /
• 2007

Statement of problem: The cement-type abutment would be needed for the reduction of its body in order to correct the axis and to assure occlusal clearance. In the case of intraoral preparation, there is a potential risk that generated heat could be transmitted into the bone-implant interface, where it can cause deterioration of tissues around the implant and failed osseointegration. Purpose: The purpose of this study was to assess the difference of the heat transmitting effect on external and internal connection implant types under various conditions. Material and method: For evaluating the effects of alternating temperature, the thermocoupling wires were attached on 3 areas of the implant fixture surface corresponding to the cervical, middle, and apex. The abutments were removed 1mm in depth horizontally with diamond burs and were polished for 30 seconds at low speed with silicone points using pressure as applied in routine clinical practice. Obtained data were analyzed using Mann-Whitney rank-sum test and Wilcoxon / Kruskal-Wallis Tests. Result: Increased temperature on bone-implant interface was evident without air-water spray coolant both at high speed reduction and low speed polishing (p<.05). But, the difference between connection types was not shown. Conclusion: The reduction procedure of abutment without using proper coolant leads to serious damage of oral tissues around the implant irrespective of external and internal connection type.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• 대한치과교정학회지
• /
• 제53권2호
• /
• pp.89-98
• /
• 2023

Objective: This study aimed to compare the mechanical and thermal properties in the anterior and posterior segments of new and retrieved specimens of a commercially available multizone superelastic nickel-titanium (NiTi) archwire. Methods: The following groups of 0.016 × 0.022-inch Bioforce NiTi archwires were compared: a) anterior and b) posterior segments of new specimens and c) anterior and d) posterior segments of retrieved specimens. Six specimens were evaluated in each group, by three-point bending and bend and free recovery tests. Bending moduli (Eb) were calculated. Furthermore, the new specimens were evaluated with scanning electron microscopy/energy-dispersive X-ray spectrometry. A multiple linear regression model with a random intercept at the wire level was applied for data analysis. Results: The forces in the posterior segments or new specimens were higher than those recorded in the anterior segments or retrieved specimens, respectively. Accordingly, Eb also varied. Higher austenite start and austenite finish (Af) temperatures were recorded in the anterior segments. No statistically significant differences were found for these temperatures between retrieved and new wires. The mean elemental composition was (weight percentage): Ni, 52.6 ± 0.5; Ti, 47.4 ± 0.5. Conclusions: The existence of multiple force zones was confirmed in new and retrieved Bioforce archwires. The retrieved archwires demonstrated lower forces during the initial stages of deactivation in three-point bending tests, compared with new specimens. The Af temperature of these archwires may lie higher than the regular intraoral temperature. Even at 2 mm deflections, the forces recorded from these archwires may lie beyond biologically safe limits.

• 한국어병학회지
• /
• 제23권1호
• /
• pp.57-67
• /
• 2010

퀴놀론계 항균제인 nalidixic acid(OA), piromidic acid(PA), oxolinic acid(OA)를 사육수온($13{\pm}1.5^{\circ}C$, $23{\pm}1.5^{\circ}C$)에 따라서 넙치(평균체중 700 g)에 60 mg/kg의 농도로 1회 경구 투여한 다음, 경시적인 혈청내 잔류농도를 분석하였다. 수온이 $23{\pm}1.5^{\circ}C$의 경우, 투여 후 NA는 10시간째 ($11.55{\mu}g/m\ell$), PA는 24시간째($3.79{\mu}g/m\ell$), OA는 30시간째($1.12{\mu}g/m\ell$)에 각각 최대혈중농도에 도달하였다. 수온이 $13{\pm}1.5^{\circ}C$의 경우, 투여 후 NA는 10시간째($6.36{\mu}g/m\ell$), PA는 15시간째($1.4{\mu}g/m\ell$), OA는 30시간째($1.01{\mu}g/m\ell$)에 각각 최대혈중농도에 도달하였다. NA와 PA의 넙치 혈중내 흡수정도는 수온 $13{\pm}1.5^{\circ}C$보다 수온 $23{\pm}1.5^{\circ}C$에서 매우 높게 나타났으며, NA의 넙치 혈중내 소실정도는 수온 $13{\pm}1.5^{\circ}C$보다 수온 $23{\pm}1.5^{\circ}C$에서 두드러지게 빨랐다. 한편 OA의 넙치 혈중내 흡수 및 소실정도는 사육수온에 크게 영향을 받지 않는 것으로 나타났다. NA 및 PA는 one-compartment model, OA는 two-compartment model로 해석하여 WinNonlin program을 이용, 약물동태학적 매개변수(parameter)를 조사하였다. 수온이 $23{\pm}1.5^{\circ}C$의 경우, 혈장농도-시간곡선하 면적(AUC)은 NA, PA, OA가 각각 258.26, 248.12 및 $138.20{\mu}g{\cdot}h/m\ell$, 혈중최고농도의 도달시간($T_{max}$)은 10.67, 21.15 및 23.95 h, 혈중최고농도($C_{max}$)는 8.91, 3.09 및 $1.06{\mu}g/m\ell$로 계산되었다. 수온이 $13{\pm}1.5^{\circ}C$의 경우, AUC는 NA, PA, OA가 각각 341.45, 103.89 및 $159.10{\mu}g{\cdot}h/m\ell$, 혈중최고농도의 도달시간은 7.72, 12.89 및 28.03 h, 혈중최고농도는 6.23, 1.22 및 $1.02{\mu}g/m\ell$로 계산되었다.

• Journal of Pharmaceutical Investigation
• /
• 제23권3호spc1호
• /
• pp.9-18
• /
• 1993

Sugar spheres loaded with melatonin (MT) were coated with $Aquacoat^{\circledR}$ to control the release rate of MT over 8 hours. A zero-order release pattern over 8 hours was obtained with 20% coating on 8-10 mesh beads in USP basket dissolution studies. MT in 20% coated beads was quite stable at room temperature with less than 5% MT degraded during 6 months' storage. Dissolution profiles were also unchanged after 6 months. An oral preparation containing MT-loaded uncoated beads for immediate release and 20% coated beads with $Aquacoat^{\circledR}$ for controlled release over 8 hours was evaluated in six human subjects. When total 0.5 mg MT as low dose (immediate release portion of MT, 0.1 mg) was administered to four subjects, average peak plasma MT concentration was reached at about 600 pg/ml and maintained at about 10 pg/ml over 8 hours. Plasma MT concentration-time profiles were similar in shape to computer-simulated profiles. However, maximal plasma MT concentrations were three times greater compared to computer simulated curve. These results suggest that MT dose, ratio of immediate and controlled release MT, and pharmacokinetic parameters selected are adjusted to mimic endogenous MT concentration-time curve. In another study, 0.2 mg MT having 10% of immediate release portion and 80% controlled release portion produced plasma MT concentration-time curve which is more similar to endogenous profiles. A low bioavailability (<20%) may result from extensive first pass metabolism and remaining amounts of MT from controlled beads. A good correlation between plasma MT concentration and urinary excretion rate of 6-sulphatoxymelatonin (6-STMT), a major metabolite of MT was observed. As plasma MT concentration increased, urinary excretion rate of 6-STMT increased concomitantly. The linear relation between plasma MT and urinary excretion rate of 6-STMT was statistically significant. This result suggests that urinary 6-STMT may be used as an index of circadian rhythms of MT in humans.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.1111-1117
• /
• 2011

본 연구에서는 의료용 신조명 부품으로 주목받고 있는 고출력 LED를 사용해 구강구조 확인을 위한 치과영역, 진료 및 수술실에서 환부에 대한 작은 범위(국소부위)의 무영 촬영이 가능한 휴대용 LED Light를 설계 개발하였다. 개발에 적용한 LED는 피사체 고유의 Tone에 대한 섬세한 표현력과 입체감을 부각시키기 위해 다양한 색상 구현 및 광량조절이 가능하도록 3색 LED를 사용했다. 사용된 LED의 전기적 특성 및 광학적 특성을 고려해 고효율의 Light Module를 개발했으며 휴대 사용을 위해 낮은 전압에서도 구동이 가능한 SMPS를 제작했다. 또한 PWM 제어방식을 이용해 단색광부터 백색광까지 32,768개의 다양한 색상 구현이 가능했다.

• 대한치과기공학회지
• /
• 제23권2호
• /
• pp.179-188
• /
• 2002

With regard to the manufacture of dental prosthesis, all the dental mechanism is of vital significance at the aspect of activating its function by fixing the prosthesis to Patient's oral cavity. However, if there we will take our immediate action without the discretion about its process none the less for the importance of dental mechanism, then we might have a serious problem. Accordingly, there need to pay attention to the dilatability makes up for the shrinkage state occurring by the feature of metal materials and manufacturing process which appeared in the process of dental mechanism, which eventually is expected to playa very important role in casting a dental prosthesis appropriate to one's oral tissue. This study was designed to take into account of the effects on margin consistency of prosthesis according to the continued time of casting-ring in the course of the casting of dental alloy. For this, the researcher made an experiment on the casting of dental alloy, its dilatability, and the change of phase. The results of this study were as follows: First, the researcher could see that the sample which was cast under the condition of $650^{\circ}C/20$ Minutes(the continued time) was far superior to others at the aspect of margin consistency. Second, according to the measurement of expansion coefficient by Dilatometer, the researcher perceived the fact that the expansion-coefficient showed a maximum of $37.1{\mu}m$ considering the sample's length which was cast with ordinary temperature under the condition of $650^{\circ}C/20$ Minutes. Third, from the result of X-ray diffraction under the condition of $650^{\circ}C/20$ Minutes(the continued time), the researcher could find that there's no difference between the change of phase and its intensity. As mentioned above, the researcher could ascertain the fact that its contraction don't give rise to the change of phase.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.411-414
• /
• 2002

The CdTe semiconductor detector has a higher detection efficiency for x-rays and $\square$amma rays and a wider energy band gap compared with Si and Ge semiconductor detectors. Therefore, the size of the detector element can be made small, and can be operated at room temperature. The interaction between a CdTe detector and incident x-rays is mainly photoelectric absorption in the photon energy range of up to 100 keV. In this energy range, Compton effects are almost negligible. We have developed a 256 channel CdTe array detector system for monochromatic x-ray CT using synchrotron radiation. The CdTe array detector system, the element size of which is 1.98 mm (h) x 1.98 mm (w) x 0.5 mm (t), was operated in photon counting mode. In order to improve the spatial resolution, we tilted the CdTe array detector against the incident parallel monochromatic x-ray beam. The experiments were performed at the BL20B2 experimental hutch in SPring-8. The energy of incident monochromatic x-rays was set at 55 keV. Phantom measurements were performed at the detector angle of 0, 30 and 45 degrees against the incident parallel monochromatic x-rays. The linear attenuation coefficients were calculated from the reconstructed CT images. By increasing the detector angle, the spatial resolutions were improved. There was no significant difference between the linear attenuation coefficients which were corrected by the detector angle. It was found that this method was useful for improving the spatial resolution in a parallel monochromatic x-ray CT system.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권2호
• /
• pp.725-729
• /
• 2014

Background: Having been known as a virulent disease in 1970s, cancer is now onsidered a chronic disease and 64% of cancer patients live for five years after diagnosis. Home care has gradually gained more importance and it is a great burden on the shoulders of caregivers. Caregivers have to undertake the responsibility of the cancer patient's home management, and organize care and arrange health care services according to the ever-changing condition of patients. Caregivers should be prepared for home care so they can provide accurate and complete care to patients. This descriptive study aims to investigate challenges that caregivers encounter in the home care of patients and the reasons for these challenges. Materials and Methods: The research group consisted of caregivers of outpatients in a daily treatment center in a university hospital. The research sampling consisted of 137 voluntary caregivers of patients who attended the Daily Treatment Center for control, chemotherapy or other supportive cares services between January-June, 2011. Data were collected with face-to-face interviews in the Daily Treatment Center. Ethics Committee approval was taken university hospital; caregivers and their patients were informed about the research and their approval was taken as well. Results: It was found that 54.01% of caregivers help patient's nutrition, 50.36% help medicine use, 26.28% help oral hygiene, 26.28% help to meet urinary needs and 51.82% help to change clothes, 69.34% of caregivers help to change bed sheets, 38.69% help the patient to communicate with their environment and 71.53% help to bring the patient to hospital or outside. Conclusions: This study, it was found that caregivers experience challenges due to following factors: patient nutrition, medicine use, oral and body hygiene, colostomy maintenance and stomach tube feeding, concern of dropping the patient, feeling incompetency in body temperature and fever control, fatigue, and lack of personal time.