• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.235-239
• /
• 2000

Ipriflavone (3-phenyl-7-isopropoxy-4H-1-benzopyran-4-one, IP) is a well-known antiosteoporotic drug with poor bioavailability. In the previous study, we reported that the IP formulation prepared by spray-drying method with polyvinylpyrrolidone (PVP) (SIP) was very effective in improving the bioavailability of IP. In this study, we examined the effects of molecular weight and mixture ratios of PVP to IP on the systemic absorption of IP following oral administration of SIP at a dose of 50 mg/kg to rats. In the effect of molecular weight, the Cmax of spray-dried IP with PVP K30 (SIP-K30) was significantly higher than those of spray-dried IP with PVP 360 (SIP-360), spray-dried IP with PVP K90 (SIP-K90), and spray-dried IP with PVP K17 (SIP-K17) (p<0.05). The AUC of SIP-K30 was about 2, 3, and 5.5 times higher than those of SIP-360, SIP-K90, and SIP-K17, respectively. The AUC value of SIP-K30 was significantly greater than those of SIP-K17 and SIP-K90 (p<0.05) except for SIP-360. In the ratio of PVP K30 to drug, the $C_{max}$ and the AUC value of 3 : 7 IP-PVP solid dispersion were similar to those of 5 : 5 IP-PVP and significantly higher than those of the other solid dispersions (p<0.05). It was concluded that the spray-dried IP with PVP K30 at the ratio of 3:7 (w/w) was the best formulation for improving the bioavailability of IP.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.1939-1943
• /
• 2014

Solid dispersion (SD) system of everolimus (EVR) with Gelucire 50/13 (Stearoyl polyoxyl-32 glycerides) was prepared using melt granulation technique with the aim of improving the physicochemical properties and dissolution rate. The solid state characterization using scanning electron microscopy and X-ray powder diffraction, indicated that the drug was homogeneously distributed in the surfactant carrier in a stable amorphous form. The dissolution rate of EVR from the optimized SD composed of the drug, Gelucire 50/13 and microcrystalline cellulose in a weight ratio of 1:5:10, was markedly rapid and higher than that from the drug powder and the market product (Afinitor$^{(R)}$, Novartis Pharmaceuticals) in all dissolution mediums tested from pH 3.0 to pH 6.8. The results of this study suggest that formulation of SD with Gelucire 50/13 using melt granulation procedure may be a simple and promising approach for improving the dissolution rate and oral absorption of the anti-cancer agent without the need for using an organic solvent.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.4
• /
• pp.249-255
• /
• 1998

Solid Lipid Nanoparticle(SLN), one of the colloidal carrier systems, has many advantages such as good biocompatibility, low toxicity and stability. In this paper, the effects of drug lipophilicity and surfactant on the drug loading capacity, particle size and drug release profile were examined. SLNs were prepared by homogenization of melted lipid dispersed in an aqueous surfactant solution. Ketoprofen, ibuprofen and pranoprofen were used as model drugs and tweens and poloxamers were tested for the effect of surfactant. Mean particle size of prepared SLNs was ranged from 100 to 150nm. The drug loading capacity was improved with the most lipophilic drug and low concentration of surfactant. Particle size and polydispersity of SLNs were changed according to the used lipid and surfactant. The rates of drug release were controlled by the loading drug and surfactant concentration. SLN system with effective drug loading efficiency and proper particle size for the intravenous or oral formulation can be prepared by selecting optimum drug and surfactant.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3188-3194
• /
• 2014

Compound K (CK) was formulated as polymeric micelles (PM) using Pluronic$^{(R)}$ F-127 to enhance the oral absorption of CK, an intestinal bacterial metabolite of ginseng protopanaxadiol saponin. The physicochemical properties of Ck-loaded PM were characterized and an in vitro transport study using the Caco-2 cell system as well as an in vivo pharmacokinetic study using SD rats was carried out. The hydrodynamic mean particle size of CK-loaded PM (CK-PM) was $254{\pm}23.45nm$ after rehydration and the drug loading efficiency was ca. 99.9%. The FT-IR spectroscopy, X-ray diffraction, differential scanning calorimetry and scanning electron microscopy data supported the presence of a new solid phase in the PM. The $P_{app}$ value of in vitro Caco-2 cell permeation of CK-PM and the oral absorption of CK was enhanced about 1.2-fold and 2.6-fold compared to CK suspension, respectively, showing that the present PM formulation enabled an enhancement of oral CK absorption.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.277-283
• /
• 2011

Solid dispersion is mainly used for improved dissolution of poorly water-soluble drugs. Solid dispersion of pranlukast was prepared by spray-drying with plasdone S-630. When pH of water was high, pranlukast was highly soluble in the solubility experiment of solid dispersions with varying pH. The particle size of pranlukast particles in solid dispersions was measured to be in nanometers scale based on particle size analysis. Zeta-potential analysis confirmed the negative charge of solid dispersion. SEM was used to observe the surface of solid dispersion, which confirmed spherical morphology, DSC and XRD confirmed the amorphous nature of solid dispersions. The in vitro test was carried out to find improved dissolution rate of pranlukast solid dispersion in simulated juice gastric and a controlled experiment was carried out to compare pranlukast solid dispersions with a conventional drug (Onon$^{(R)}$), These results showed the dissolution properties of pranlukast solid dispersions prepared by spray drying proper for the oral pharmaceutical formulation.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.434-440
• /
• 2014

We prepared nanoparticles containing insoluble celecoxib by the method of solid dispersions using a spray dryer to improve solubility of celecoxib. We used PVP K30 and Eudragit EPO as water-soluble carriers for the solid dispersion, and poloxamer 407 as a surfactant. Characterization of celecoxib solid dispersion was performed by scanning electron microscope (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The results of SEM, DSC and XRD demonstrated that celecoxib is amorphous in solid dispersion. The dissolution rate measured in intestinal juice showed that the method of solid dispersion improved celecoxib solubility as compared with a conventional drug (Celebres$^{(R)}$). In conclusion, solid dispersion formulation prepared by a spray dryer would improve the solubility of celecoxib in oral administration.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.259-266
• /
• 2000

Vitamin A palmitate, an oily drug which has low chemical stability and is poorly absorbed in the intestine, was formulated into a novel powdered dosage form. This is designated as a redispersible dry emulsion by freeze-drying technique. Before preparing a dry emulsion, vitamin A palmitate oil in solid in water (O/S/W) emulsion with soybean oil and coconut oil using Aerosil 200 as an emulsion stabilizer and polyoxyethylene-polyoxypropylene-blockcopolymer (Pluronic F68) as a surfactant was prepared. The resultants of the stability tests indicated that vitamin A palmitate O/S/W emulsion was improved on increasing the oil content of the formulation. The resultant dry emulsion particles have a good stabilities and free flow properties and readily released the oily droplets to form stable emulsions on rehydration. The drug releasing property from the resultant dry emulsion particles was dependent on factors such as amount of oily carrier(soybean oil) and surfactant(Pluronic F68) formulated. Above 80% of vitamin A palmitate content was released from the dry emulsion for 1 hour. It was deduced that vitamin A palmitate dry emulsion was definitely suitable for oral administration, since small droplets of vitamine A palmitate from the dry emulsion may alter the drug absorption profile resulting in bioavailability enhancement.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1380-1387
• /
• 2014

The purpose of this study was to develop a mouthwash product with solid fermented oriental medicinal herb (OMH). Solid fermentation of magnolia, liquorice, and cnidium by Phellinus linteus mycelium was carried out successfully when 30% water was added to the medium, whereas 10% brown rice powder was required as an extra nutrient for solid fermentation of mint besides water. The amount of total phenol compounds and DPPH radical scavenging activity of OMH increased significantly (P<0.05) upon solid fermentation. Anti-microbial activities of fermented OMH also increased and were approximately 100-fold greater than those of unfermented samples. Oral pathogens such as Staphylococcus epidermis, Streptococcus pyogenes, Candida albicans, or Streptococcus mutans were used for determination of anti-microbial effects of OMH. Formulation of the mouthwash was developed based on the results of the sensory evaluation. Among seven formulas, the best formula chosen by the sensory evaluation was as follows: mouthwash prepared with 0.075% ethanol extract of solid fermented OMH as a main ingredient, 83.64% hot water extract of mint and clove (100:15, v/v) as a mouthwash base component, and other miscellaneous ingredients, including sodium fluoride, menthol, and surfactants. Data from a consumer's preference test with 30 participants, overall acceptance, and willingness to buy the product developed in this study were all significantly higher for the tested mouthwash compared to mouthwash on the market manufactured with OMH but with a different formula. Duration of freshness of the mouthwash after usage as determined by Breath Checker was not significantly different between the two samples, although the duration of our product was slightly longer than that of the commercial product mentioned above.