• The Korean Journal of Food And Nutrition
• /
• v.27 no.1
• /
• pp.31-42
• /
• 2014

This study was conducted to evaluate the effect of gamma irradiation (0.4, 0.6, 0.8, 1 and 1.5 kGy) on the microbiological, physicochemical and sensory qualities of imported orange during storage at $3^{\circ}C$ for 60 days. Total aerobic bacteria and yeast/mold counts in non-irradiated oranges were 3.59 and 3.75 log CFU/g, and those counts in irradiated oranges at 1.5 kGy were decreased by 1.75 and 2.26 log CFU/g, respectively. Moreover, those counts were decreased significantly according to a dose-dependent manner after gamma irradiation. The pH revealed no significant difference between the control and irradiated samples; however, titratable acidity was decreased significantly according to a dose-dependent manner and storage time. The vitamin C contents were decreased significantly according to a dose-dependent manner and storage time after gamma irradiation. Further, sensory evaluation testing revealed no significant difference between the control and irradiated samples, except 1.5 kGy. Samples irradiated at 1.5 kGy had the lowest values in color, sweetness, sourness, flavor, texture and overall acceptance. The results suggest that gamma irradiation was effective for ensuring microbiological safety; however, irradiated oranges at 1 and 1.5 kGy did not have good physicochemical and sensory qualities. Therefore, we can use the sample irradiated at 0.4~0.6 kGy as optimum-dose to be minimize on quality changes.

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.533-545
• /
• 2017

Massive volumes of GPS trajectory data bring challenges to storage and processing. These issues can be addressed by compression algorithm which can reduce the size of the trajectory data. A key requirement for GPS trajectory compression algorithm is to reduce the size of the trajectory data while minimizing the loss of information. Synchronized Euclidean distance (SED) as an important error measure is adopted by most of the existing algorithms. In order to further reduce the SED error, an improved algorithm for open window time ratio (OPW-TR) called local optimum open window time ratio (LO-OPW-TR) is proposed. In order to make SED error smaller, the anchor points are selected by calculating point's accumulated synchronized Euclidean distance (ASED). A variety of error metrics are used for the algorithm evaluation. The experimental results show that the errors of our algorithm are smaller than the existing algorithms in terms of SED and speed errors under the same compression ratio.

• Korean journal of food and cookery science
• /
• v.8 no.3
• /
• pp.281-289
• /
• 1992

The physicochemical, rheological and sensory characteristics of Backsulgies added with dietary fibers-cellulose, pectin and wheat bran-were investigated. The maximum acceptable ratio of fibers was 10% for wheat bran or cellulose, 3% for pectin. As me results of physicochemical analysis, cellulose and pectin had larger water-binding capacity man wheat bran. Swelling power was increased with temperature increment. But the type of added dietary fiber did not make significant differences. The degree of gelatinization was measured by maltose content. The retrogradation of backsulgies was significantly delayed by the addition of dietary fibers. The retardation effect of dietary fibers for retrogradation of backsulgies was also proved by textural analysis and time constant determination of Avrami equation. Pectin had especially excellent delaying effect while me storage time extended. There were no significant differences in sensory characteristics between me backsulgi with no dietary fibers and backsulgies added with cellulose 3%, pectin 1% and wheat bran 3%. Therefore, we concluded mat cellulose 3%, pectin 1% and wheat bran 3% were me optimum addition ratios, which have the delaying effect of retrogradation, and which could be accepted as same as conventional backsulgies organoreptically.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.87-96
• /
• 1995

Colorant concentrates are prepared by use of concentration method of colorants extracted from Sappan wood using met hanol. Dyeabilities and fastness properties of silk fabrics dyed with concentrate of Sappan wood are investigated.The results obtained are as follows; 1. The storage stability of colorant concentrate is poor as concentration is excess. 2. Because the colors of dyeings are different with mordants, aluminium acetate, copper acetate, chromium alum and tin chloride are used in order to obtain reddish color. 3. The optimum dyeing temperature and dyeing time are 6$0^{\circ}C$ and 60 min, respectively. 4. Dry cleaning fastness is very good, and light fastness and washing fastness are low. 5. The dyeing method is simple owing to usehess of colorant concentrate prepared without extraction of colorant every time.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.1
• /
• pp.4038-4051
• /
• 1976

This study was intended to provide the basic design creteria for the refrigerated storage, and to estimate the required optimum capacity of refrigerator for the different sizes and kinds of the existing fruit storage. The structural characteristics of the existing fruit storages in Pyungtaek-khun of Kyungki-do were surveyed. The average out-door air temperature during the expected storage life after harvesting, was obtained by analyzing the weather information. The heat transfer rates through the different models of storage walls were estimated. The refrigerating load required for different models of fruit storage was analyzed in the basis of out-door air temperature. The results obtained in this study are summarized as follows: 1. The fruit storages surveyed were constructed on-ground, under-ground and sub-ground type buildings. The majority of them being the on-ground buildings are mostly made of earth bricks with double walls. Rice hull was mostly used as the insulating materials for their walls and ceilings. About 42% of the buildings were with the horizontal ceiling, 22% with sloped ceiling, and about 36% without ceiling. About 60% of the storage buildings had floor without using insulated material. They were made of compacted earth. 2. There is no difference in heat transfer among six different types of double walls. The double wall, however, gives much less heat transfer than the single wall. Therefore, the double wall is recommended as the walls of the fruit storage on the point of heat transfer. Especially, in case of the single wall using concrete, the heat transfer is about five time of the double walls. It is evident that concrete is not proper wall material for the fruit storage without using special insulating material. 3. The heat transfer through the storage walls is in inverse proportion to the thickness of rice hull which is mostly used as the insulating material in the surveyed area. It is recommended that the thickness of rice hull used as the insulating material far storage wall is about 20cm in consideration of the decreasing rate of heat transfer and the available storage area. 4. The design refrigerating load for the on-ground storages having 20 pyung area is estimated in 4.07 to 4.16 ton refrigeration for double walls, and 5.23 to 6.97 ton refrigeration for single walls. During the long storage life, however, the average daily refrigerating load is ranged from 0.93 to 0.95 ton refrigeration for double walls, and from 1.15 to 1.47 ton refrigeration for single walls, respectively. 5. In case of single walls, 50.8 to 61.4 percent to total refrigerating load during the long storage life is caused by the heat transferred into the room space through walls, ceiling and floor. On the other hand, 39.1 to 40.7 percent is for the double walls. 6. The design and average daily refrigerating load increases in linear proportion to the size of storage area. As the size increases, the increasing rate of the refrigerating load is raised in proportion to the heat transfer rate of the wall. 7. The refrigerating load during the long storage life has close relationship to the out-door air temperature. The maximum refrigeration load is shown in later May, which is amounted to about 50 percent to the design refrigerating load. 8. It is noted that when the wall material having high heat transfer rate, such as the single wall made of concrete, is used, heating facilities are required for the period of later December to early February.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.752-757
• /
• 1995

The effect of fermentation temperature on the changes of pH, acidity, salt content, color and vitamin C of mustard leaf kimchi during various storage days was investigated. The conditions of fermentation temperature were set at $4^{\circ}C$ (sample A) and $20^{\circ}C$ (sample B), and $4^{\circ}C$ after keeping at $20^{\circ}C$ for 12 hours(sample C) and $20^{\circ}C$ for 36 hours(sample D). As the fermentation proceeded, pH of sample stored at low temperature(sample A) was drop ped gradually from initial pH of 5.24 but there was great pH drop in the sample stored at high temperature(sample B, D). The salt content of the sample B at high temperature increased remarkably, and then the values showed D > A > C. The Humter values of L and a increased at the optimum ripening period, the higher the initial fermentation temperature(B) and the later the initial fermentation time at $20^{\circ}C$ those values, then decreased. The Hunter value of b constantly increased until day of 108. As fermentation time passed, the content of total vitamin C decreased to the range of 9.0mg% to 14.0mg% up to 24 days of fermentation, and at the optimum ripening period, it increased to the range of 14.0mg% to 22.0mg%, and at the fermentation period(until day 108), it decreased gradually.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.193-197
• /
• 2006

The optimum planting date, plant spacing, and harvest time for production of small-sized sweetpotato was evaluated in 2003 to 2004 at the Mokpo Experiment Station. Small-sized sweetpotato is important as snack food in Korea. Optimum planting date and plant spacing were with plastic mulch, and mid-April and $75{\times}15{\sim}20cm$ respectively, mid-June and $75{\times}15cm$ respectively without plastic mulch. Storage root yield decreased with early harvest, but the ratio of small-sized sweetpotato was higher in plots harvested after 100 days of planting (DAP) than that of 80 or 120 DAP. Considerable differences in storage root yield was noted with planting dates and plant spacings, but the use of plastic mulch resulted to smaller yield variations in plots, harvested in mid-April. Planting in mid-April and harvesting after 100 DAP increased income by about $32{\sim}61%$ compared with plantings mid-May.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.79-84
• /
• 1994

Sweet corn hybrid GCB 70 and super sweet corn hybrid NES were cultivated at vinyl tunnel in 1991 to determine the physiologically optimum harvest time for higher eating quality and sugar contnent of kernel by eat parts after silking and stored in refrigerator of 4$^{\circ}C$ and in the air. The development of ear increased continuously from silking to 30th day after silking, and sugar content was the hightest on 15th day after silking. The physiologically optimum harvest time for GCB 70 and NES was about 15~20th day and 20~25th day after silking, respectively. The sugar content of kernel by ear parts for two hybrids were high in order of basal, middle and top parts of the ear and showed significant differences among the parts of the ear. Changes of total sugar content during the storing period at 4$^{\circ}C$ for NES was almost the same by 9th day, but for GCB 70 rapidly decreased from 3rd day. The content of sucrose, glucose and fructose in super sweet corn NES were much higher than those of sweet corn GCB 70, but the maltose content of NES was lower than that of GCB 70.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.44-51
• /
• 1995

This investigation was conducted to determine the effect of the optimum planting date and place for good seed production on growth variation, grain yields, different of variety, infection of seed by fungi, and seed germination and vigor after room storage. Early maturity Korean soybean variety, Keunolkong, and introduced vegetable soybean variety, Fukura-edamame, were planted at field of YAES. and high cool land of Sajapyong in Milyang（altitude, 850m） on May 15 （early）, June 15 （mid.）, and July 15 （late） in 1991. The emergence and vegetative period gradually increased in the early planting date. The grain yield, seed weight, pod number, healthy grain yield also increased when Keunolkong was planted on early date. The healthy seed rate, Keunolkong increased in the early planting date, whereas that of Fukura also increased in the late planting date. Infection ratio of grain to phomopsis seed decay （Phomopsis spp. ' Diaporthe phaseolorum） in Fukura steadily increased in the early planting date. Infection ratio of grain to purple seed stain （Cercospora kikuchii） generally increased in the mid and late planting date. The seed germination and seedling vigor after room storage from five to six months gradually increased in the late planting date. And seed germination of Fukura rapidly decreased in the early planting date. Therefore, the optimum planting date for good seed production in early maturity vegetable soybean was June 15 in terms of harvesting time avoid a high temprature and humidity.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.413-418
• /
• 2002

The dough was frozen either before or after fermentation at the five different freezing and storage conditions. Although fermentation before freezing was effective for rapid freezing, it reduced bread volume of the dough frozen at both air freezer and liquid immersion freezer. Freezing at the air freezer set to $-70^{\circ}C$ took more time for freezing and resulted in lower bread volume than freezing at the immersion freezer set to $-20^{\circ}C$. Therefore, the freezing in the liquid immersion freezer was more effective to reduce the freezing time and increase the bread volume. At the liquid immersion freezer, the higher temperature was more effective than lower temperature. The doughs frozen in a liquid immersion freezer set to $-10^{\circ}C$ and fermented after de-frosting produced higher bread volume than control unfrozen dough. And also there was no significant difference in bread volume between the control unfrozen dough and the dough frozen in a liquid immersion freezer set to $-10^{\circ}C$, fermented before freezing and re-fermented after defrosting. The longer proof time and greater loaf volume obtained for the dough frozen and stored at the air freezer set to $-70^{\circ}C$. Therefore the optimum process for freezing the dough was freezing immediately after mixing, storing at $-10^{\circ}C$ in a liquid immersion freezer and fermented after defrosting.