• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.332-341
• /
• 1992

한반도 주변의 정규적인 해양관측 효시는 1910년대로부터 시작된다. 1915년 6월부 터 원산, 부산 등 12개 항구의 중앙부에서 10일 간격으로 해양관측이 시작되었으며, 1916년 7월부터는 거문도 해야 어청도 등 10개 등대관측소에서 연안정지관측을 역일로 시작했고, 1917년 5월부터 정선해양관측이 이루어 졌는데 이들은 총독부 수산과에서 수산시험조사사업의 일환으로 수행되었고 1921년부터 총독부수산 시험장에서 이들을 더욱 발전다. 1930년대에는 정선해양관측이 매월 초순 각 도별로 수항되어 가장 훌륭 한 관측결과가 생산되었다. 1961년부터는 항구관측을 폐지하고 연안정지관측과 정선해 양관측만 이루어 지고 있으며 해양조사선을 20여개로 수정하여 2개월마다 조사에 임하 고 있다. 이들은 기본적으로 해양생물자원의 경제적 획득에 목적을 두고 있으나 자료 를 널리 공개하여 전세계의 어느 해양연구자들도 이용할 수 있도록 하고 있다. 1960년 부터는 우리 나라 연안의 조석관측도 연속적으로 수행되고 있다. 1990년 현재 21개 정 선해양관측자료와 42개의 연안정지관측자료, 매일의 표면수온분포도 21개의 평균해면 자료가 공개적으로 이용가능하다. 앞으로 유명한 연구소일수록 해양관측자료를 공개하 여 공동이용할 수 있어야 하며 해양관측의 활성화를 위해 첫째 해양관측기구를 소모품 으로 취급할 것이 요구되고, 둘째 관측선 요원의 정당한 처우가 이루어져야 하며, 셋 째 세계적인 해양조사 사업은 국가기관에서 더욱 성실히 수행될 수 있도록 여건을 조 성할 필요가 있다. 과거에는 어업활동을 위해 해양조사가 현재에는 기후변동연구에 중 요한 자료로도 이용되고 있으므로 우리는 우리주변의 해양관측을 미래학문의 기초자료 로 끊임없이 수행해야 할 중차대한 임무를 지니고 있다.는 대체로 Weddell Sea쪽에서 남동쪽으로 가면서 증가하며, 영 양염 농도가 낮은 얼음 녹은 물의 유입이 얼룩소 a의 농도를 감소시키는 것으로 사료 된다.되어, 경기만에서 출현하는 식물플랑크톤이 서해 중동부 연안수역에서 출현하는 식물 플랑크톤보다 상대적으로 낮은 광에 적응되어 있었다. the most important in the global optimum analysis because small variation of it results in the large change of the objective function, the sum of squares of deviations of the observed and computed groundwater levels. 본 논문에서는 가파른 산사면에서 산사태의 발생을 예측하기 위한 수문학적 인 지하수 흐름 모델을 개발하였다. 이 모델은 물리적인 개념에 기본하였으며, Lumped-parameter를 이용하였다. 개발된 지하수 흐름 모델은 두 모델을 조합하여 구성되어 있으며, 비포화대 흐름을 위해서는 수정된 abcd 모델을, 포화대 흐름에 대해서는 시간 지체 효과를 고려할 수 있는 선형 저수지 모델을 이용하였다. 지하수 흐름 모델은 토층의 두께, 산사면의 경사각, 포화투수계수, 잠재 증발산 량과 같은 불확실한 상수들과 a, b, c, 그리고 K와 같은 자유모델변수들을 가진다. 자유모델변수들은 유입-유출 자료들로부터 평가할 수 있으며, 이를 위해서 본 논문에서는 Gauss-Newton 방법을 이용한 Bard 알고리즘을 사용하였다. 서울 구로구 시흥동 산사태 발생 지역의 산사면에 대하여 개발된 모델을 적용하여 예제 해석을 수행함으로써, 지하수 흐름 모델이 산사태 발생 예측을 위하여 이용할 수 있음을 입증하였다.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.289-294
• /
• 2011

The aim of this study is to evaluate the differences of ejection fraction of left ventricle through the quantitative analysis of diastolic and systolic volumes according to slices selected using cardiac MR imaging. A total of 12 volunteers (7 normal, 1 myocardium bridge, and 4 arrhythmia) underwent cardiac MRI on a MR scanner(Magnetom Trio, Siemens, Germany). Ejection fractions for quantitative analysis were calculated at single slice of center of left ventricle, 3, 5, and 6-7 slices extending from the center of left ventricle. Average values were analyzed for evaluating differences of ejection fraction according to the number of slices selected. Mean value of normal person of ejection fraction were 67.14% at single slice of center of left ventricle, 66.24% at 3 slices, 65.63% at 5 slices, and 65.29% at 6-7 slices. While ejection fraction obtained from a patient with 61.74% at single slice of center of left ventricle, 60.92% at 3 slices, 60.89% at 5 slices, and 61.89% at 6-7 slices. There was no significant differences by the number of slices selected. This study demonstrates that ejection fraction obtained from single slice of center of left ventricle may represent a optimum parameter for cardiac function, instead of the value calculated on the variable slices selected.

• Korean Journal of Poultry Science
• /
• v.45 no.3
• /
• pp.193-200
• /
• 2018

The purpose of this study was to evaluate the influence and safety of spraying Farm Clean-S (FC-S) containing 70% Chamaecyparis obtusa essential oil on the elimination of red mite in laying hens. In total, 300 laying hens (ISA brown) aged 72 weeks and infected with red mite were assigned to individual cages for five treatments with five replicates for 18 days. Treatments consisted of distilled water (negative control; NC), commercial spray product (positive control; PC), FC-S 0 (original concentration), FC-S 50 (50 times diluted) and FC-S 100 (100 times diluted). The number of red mites, egg production and weight of each group were evaluated daily throughout the whole experimental period. Egg quality and blood biochemical parameters were measured at the end of the experiment. Safety tests were confirmed by feed intake, respiration, lethargy, diarrhea and mortality symptoms after the feeding trial. As the result, more than 80% of red mites were eliminated by the FC-S 0 spray treatment, and FC-S 50 also showed a higher elimination percentage than did PC (P<0.01). However, the elimination effect of the FC-S 100 spray was lower than that of the PC, but higher than that of the NC (P<0.01). These results confirmed that the optimum FC-S dilution rate ranged from 0~50 times with distilled water to eliminate the red mite effectively. The performance, egg quality, blood parameter and safety tests were not significantly different among treatments. Thus, FC-S 0 and FC-S 50 spray treatments can effectively and sustainably control red mite infestations without detrimental effects on the performance, egg quality and plasma biochemical properties of laying hens.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.777-783
• /
• 1997

$TiO_2$ powders were synthesized via hydrolysis reaction of titanium n-propoxide in n-propanol solvent and the reaction rates were studied by use of UV-vis spectroscopic method. Concentration of water, reaction temperature, reaction time and acid-base effects of the solution were investigated to determine the optimum conditions for $TiO_2$ powder synthesis. The reaction were controlled to proceed to pseudo-first orders reaction in the presence of excess water in n-propanol solvent. The rate constants which varied with temperature and concentration of water were calculated by Guggenheim method. Reaction using $D_2O$ was also carried out to determine the catalytic character of water. $TiO_2$ powders were synthesized only in the neutral and basic solution and those were almost spheric forms having average particle size of $0.4-0.7{\mu}m$ diameter. Particle size decreased with increasing concentration of water and reaction temperature, however, increased with increasing reaction time. Associative $S_N2$ mechanism for the hydrolysis was proposed from the data of n-value in the transition state and thermodynamic parameter. $D_2O$ solvent isotope effect showed that $H_2O$ molecules reacted as nucleophilic catalysis.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.139-149
• /
• 2004

As the expansion of road capacity has become impractical in many urban areas, congestion pricing has been widely considered as an effective method to reduce urban traffic congestion in recent years. The principal reason is that the congestion pricing may lead the user equilibrium (UE) flow pattern to system optimum (SO) pattern in road network. In the context of network equilibrium, the link tolls according to the marginal cost pricing principle can user an UE flow to a SO pattern. Thus, the pricing method offers an efficient tool for moving toward system optimal traffic conditions on the network. This paper proposes a continuous network design program (CNDP) in network equilibrium condition, in order to find optimal congestion toll for maximizing net economic benefit (NEB). The model could be formulated as a bi-level program with continuous variable(congestion toll) such that the upper level problem is for maximizing the NEB in elastic demand, while the lower level is for describing route choice of road users. The bi-level CNDP is intrinsically nonlinear, non-convex, and hence it might be difficult to solve. So, we suggest a heuristic solution algorithm, which adopt derivative information of link flow with respect to design parameter, or congestion toll. Two example networks are used for test of the model proposed in the paper.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.96-106
• /
• 2004

Response surface methodology (RSM) was applied in roasting processes of perilla leaves to develop a high quality perilla leaf tea. The Hunter color parameters and electron donating ability were monitored to optimize organoleptic properties of perilla leaf tea. The roasting processes were based on the central composite design with primary variables-roasting temperature $(140{\sim}220^{\circ}C)$, time $(5{\sim}25)$, and reaction variables-sensory test, electron donating ability. From the variables, the roasting condition was optimized using statistical analysis system (SAS) program as developing the functional tea using perilla leaf. Hunter color L and b values of the powdered samples increased with the roasting processes, but Hunter color a value decreased. Electron donating ability was influenced by roasting temperature (p<0.01) and time (p<0.01), and optimum condition selected was at $220^{\circ}C$ for 15 min with coefficient of determinations $(R^2)$ above 0.98. After preference test of perilla leaf tea using parameter of taste, color, and flavor, we can estimate that the optimal roasting condition of preilla leaf for function tea manufacturing are $210{\sim}220^{\circ}C$ for $10{\sim}20$ min by response surface methodology (RSM). Tyrosinase, xanthine oxidase and electron donating ability were 10.14, 14.37 and 59.19% of perilla leaf tea.

• Ecology and Resilient Infrastructure
• /
• v.3 no.1
• /
• pp.35-45
• /
• 2016

The correlation relationships and their corresponding equations between the geomorphological parameters and the Soil Water Assessment Tool (SWAT) model parameters by Sequential Uncertainty Fitting - version 2 (SUFI-2) algorithm of SWAT Calibration and Uncertainty Programs (SWAT-CUP) were developed at the Seom-river experimental watershed. The parameters of the SWAT model at the Soksa-river experimental watershed were estimated by the developed equations. The SWAT model parameters were estimated by SUFI-2 algorithm of SWAT-CUP with rainfall-runoff data from the Soksa-river experimental watershed from 2000 to 2007. Rainfall-runoff simulation of the SWAT model was carried out at the Soksa-river experimental watershed from 2000 to 2007 for the applicability of the estimated parameters by the developed equations. The root mean square errors (RMSE) between the observed and the simulated rainfall-runoffs using the estimated parameters by developed equations of correlation analysis and the optimum parameters by SUFI-2 of SWAT-CUP were $1.09m^3/s$ and $0.93m^3/s$ respectively at the Soksa-river experimental watershed from 2000 to 2007. Therefore, it is considered that the parameter estimation of the SWAT model by the geomorphological characteristics parameters has applicability.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.111-114
• /
• 2011

As a growth-template of ZnO nanorods (NR), a hexagonal $\beta-Ni(OH)_2$ nanosheet (NS) was synthesized with the low temperature hydrothermal process and its microstructure was investigated using a high resolution scanning electron microscope and transmission electron microscope. Zinc nitrate hexahydrate was hydrolyzed by hexamethylenetetramine with the same mole ratio and various temperatures, growth times and total concentrations. The optimum hydrothermal processing condition for the best crystallinity of hexagonal $\beta-Ni(OH)_2$ NS was determined to be with 3.5 mM at $95^{\circ}C$ for 2 h. The prepared $Ni(OH)_2$ NSs were two dimensionally arrayed on a substrate using an air-water interface tapping method, and the quality of the array was evaluated using an X-ray diffractometer. Because of the similarity of the lattice parameter of the (0001) plane between ZnO (wurzite a = 0.325 nm, c = 0.521 nm) and hexagonal $\beta-Ni(OH)_2$ (brucite a = 0.313 nm, c = 0.461 nm) on the synthesized hexagonal $\beta-Ni(OH)_2$ NS, ZnO NRs were successfully grown without seeds. At 35 mM of divalent Zn ion, the entire hexagonal $\beta-Ni(OH)_2$ NSs were covered with ZnO NRs, and this result implies the possibility that ZnO NR can be grown epitaxially on hexagonal $\beta-Ni(OH)_2$ NS by a soluble process. After the thermal annealing process, $\beta-Ni(OH)_2$ changed into NiO, which has the property of a p-type semiconductor, and then ZnO and NiO formed a p-n junction for a large area light emitting diode.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.624-627
• /
• 2004

본 연구는 동일한 병렬기계에서의 총 납기지연의 합을 최소화하는 일정계획 문제에 대해 다룬다. 이 문제는 Lenstra et al. (1977)에 의해 NP-hard로 알려져 있으며, 작업의 수와 기계의 수가 큰 현실적 문제에 대해 적절한 시간 내에 최적해를 찾는다는 것은 사실상 불가능하다. 따라서 본 연구에서는 이 문제를 해결하기 위하여 혼합형 유전 알고리즘(hybrid genetic algorithm)을 제안한다. 혼합형 유전 알고리즘에서는 임의로 발생시킨 모집단에 대해 먼저 유전 알고리즘(genetic algorithm)이 세대를 진행하며 해를 개선한다. 유전 알고리즘이 일정기간동안 더 이상 해를 개선하지 못하면, 부분탐색 알고리즘(local-search algorithm))이 유전 알고리즘의 모집단의 개체들에 대해 해의 개선을 시도한다. 즉, 부분 탐색 알고리즘은 모집단 속의 각각의 개체를 초기해로 하여 모집단 내의 개체 수만큼의 부분 최적해(local optimum)들을 구한다. 이렇게 구한 부분 최적해들로 새로운 모집단을 구성하면 다시 유전 알고리즘이 진행된다. 이 과정을 종료조건에 이를 때까지 번갈아가며 반복 수행한다. 본 연구에서 제안한 유전 알고리즘에서는 Bean(1994)이 제안한 Random key 방법으로 개체를 표현하였으며 Park(2000)이 제안한 3가지 교차 연산자들을 채용하였다. 부분탐색 알고리즘을 위해서는 쌍대교환(pair-wise interchange) 방법을 통해 이웃해를 생성하였다. 선행실험을 통하여 제안한 혼합형 유전알고리즘에서 사용하는 다양한 모수(parameter)값들을 최적화하였으며 알고리즘의 성능을 비교하기 위하여 기존의 알고리즘과도 비교실험을 수행하였다.복적인 지표가 채택되는 경우를 포함하고 있다. 셋째는 추상적이며 측정이 어려운 지표를 채택하고 있는 경우이다. 여기에는 지표에 대한 정확한 정의가 이루어져 있지 않아 피 평가자가 불필요하거나 과다한 평가 자료를 준비해야 하거나 평가자로 하여금 평가 시 혼돈을 유발할 가능성이 있거나, 또는 상위개념의 평가항목과 하위개념의 평가항목이 혼재되어 구분이 모호한 경우를 포함하고 있다. 바탕으로 '생태적 합리성'이라는 체계적인 지식교육을 거쳐서, '환경정의' 의식의 제고로 이어가고, 굵직한 '환경갈등'의 상황에서 뚜렷한 정치적 태도와 실천을 할 수 있는 '생태적 인간상'의 육성으로 나아갈 수 있어야 한다는 것이 필자의 생각이다. 이를 위해서는 어찌되었건 체험학습 영역에서는 환경현안에 대한 사회적 실천을 '교육 소재'로 삼을 수 있어야 하며, 교과학습 영역에서는 한국사회의 환경현안에 대한 정치경제적 접근을 외면하지 말고 교과서 저작의 소재로 삼을 수 있어야 하며, 이는 '환경관리주의'와 '녹색소비'에 머물러 있는 '환경 지식교육'과 실천을 한단계 진전시키는 작업으로 이어질 것이다. 이후 10년의 환경교육은 바로 '생태적 합리성'과 '환경정의'라는 두 '화두'에 터하여 세워져야 한다.배액에서 약해를 보였으나, 25% 야자지방산의 경우 50 ${\sim}$ 100배액 어디에서도 액해를 보이지 않았다. 별도로 적용한 시험에서, 토마토의 경우에도 25% 야자지방산 비누 50 ${\sim}$ 100배액 모두 약해를 발생하지 않았으나, 오이에서는 25% 야자지방산 비누 100배액에도 약해를 나타내었다. 12. 이상의 결과, 천연지방산을 이용하여 유기농업에 허용되는 각종의 살충비누를 제조할 수 있었으