• 터널과지하공간
• /
• 제4권2호
• /
• pp.119-131
• /
• 1994

This is a Double-Track Railway tunnel in typical Tae-Gu black and gray shale forming part of the No.1 Line of the Tae-Gu Subway. The main fault zone at tunnel is a moderately to highly weathered and closely jointed zone, 0.5 m wide with associated paralled jointing which is slickensided and fractured. After excavation by blasting, the soft rocks should need to be reinforced with optimal supporting pattern which might be better redesigned through the consideration of the results of in-situ rock measurements at the field. Performances fo the field tests included Point Load Test, Schmidt Hammer Test, and field joint measurement gave the detail data for the optimum support design and safe excavation of the No.1 Line of Tae-Gu Subway at the No.1-7 consturction site adn the safety of this redesigned supports system was analysed by the FDM program FLAC.

• Bulletin of the Korean Chemical Society
• /
• 제18권8호
• /
• pp.814-818
• /
• 1997

The chemical waste treatment, APEG (alkali/polyethylene glycol) process has been shown to be effective for the dechlorination of PCBs in transformer oil. Considerable amount of PCBs, however, still remains in the waste exceeding the 25-50 ppm limit set by regulatory agency. A new thermal regeneration technology has been developed in our laboratory for disposal of hazardous organic wastes. Due to the limited oxidation of carbon surface through the reverse movement of flame front to oxidant flow, this technology was termed counterflow oxidative system (COS). Specially, the oxidant flow in the COS process is a principal parameter which determines the optimum conditions regarding acceptable removal and destruction efficiency of adsorbed organic wastes at minimal carbon loss. The COS process, under optimum conditions, was found to be very effective and the removal and destruction efficiency of 99.99% or better was obtained for residual PCBs in the waste while bulk (≥90%) of carbon was recovered. Any toxic formation of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzo furans (PCDFs) were not detected in the regenerated carbon and impinger traps. The results of surface area measurement showed that the adsorptive property of regenerated carbon is mostly reclaimed during the COS process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.146-147
• /
• 2009

$CuGaSe_2$ (CGS) layers were grown by the hot wall epitaxy method. The optimum temperatures of the substrate and source for growth turned out to be 450 and $610^{\circ}C$, respectively. Based on the absorption measurement, the band-gap variation of CGS was well interpreted by the Varshni's equation. By analyzing these emissions, a band diagram of the observed optical transitions was obtained. From the solar cell measurement, an 11.17 % efficiency on the n-CdS/p-CGS junction was achieved.

• Applied Biological Chemistry
• /
• 제33권3호
• /
• pp.257-260
• /
• 1990

김치 숙성도 판정을 위하여 $25^{\circ}C$에서 김치를 발효시키면서 생성되는 이산화탄소를 soda lime에 흡착시키면서 6시간 간격으로 무게 증가율을 측정하였다. 발효 36시간경에 무게 증가율이 최대값을 나타내었는데, 이는 pH, 적정 산도 및 관능 검사의 결과와 비교했을 때 김치의 숙성 적기와 비교적 잘 일치하였다. 따라서 이 방법은 김치의 숙성도를 판정하는 데 유효한 것으로 사료된다.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1358-1367
• /
• 2004

As a part II of theis research, new local inspection planning strategy is proposed in this paper based on the proposed inspection feature extraction method. In the local inspection planning stage, each feature is decomposed into its constituent geometric elements for more effective inspection planning. The local inspection planning for the decomposed features are performed to determine: (1) the suitable number of measuring points, (2) their locations, and (3) the optimum probing paths to minimize measuring errors and times. The fuzzy set theory, the Hammersley's algorithm and the TSP method are applied for the local inspection planning. Also, a new collision checking algorithm is proposed for the probe and/or probe holder based on the Z-map concept. Finally, the results are simulated and analyzed to verify the effectiveness of the proposed methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.194-197
• /
• 1997

The LB technique is one of the most powerful fabricating methods of organic ultra-thin film, which deposits a monolayer films in molecular level on the surface of the substrate. We have investigated the electrical characteristics of Myristic acid, Stearic acid and Arachidic acid LB films for horizontal direction to develop for the gas sensor. The optimum conditions for a film deposition were obtained by measurement of $\pi$-A isotherm. The status of the deposited film was confirmed by measurement of UV absorbance. We could distingished the difference of I-V characteristics for the fatty acid for the horizontal direction. The conductivity of fatty acid LB films for horizontal direction was 10$^{-7}$ ~ 10$^{-9}$ [S/cm] that mean like semiconductor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.297-302
• /
• 1997

Linear displacement accuracy is one of the most important factors that determine machine tool accuracy. The laser interferometer has been usually recommended for the measurement of linear displacement accuracy. In this paper, microcomputer aided measurement and compensation system has been developed forthe pitch error in a CNC machine tool. For accurate pitch error calculation, the analysis code for the pitch error has been also implemented according to the international standards(ISO). The PC based automatic compensation system for the pitch error is also implemented. A new algorithm for calculating optimum value for pitch error compensation is proposed, minimizing the deviation at each target points. The development system has been applied to a practical CNC maching center and the performance has been demonstrated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.264-270
• /
• 1996

In this paper, a computer automated system has been developed for measuring the focal length of camera lens using the MTF(Modurar Transfer Function) based on the signal processing around a line CCD and autocollimator. An optical Path for the focal length measurement system has been designed around thelight sourec, collimator, camera, mirror and the line CCD. The eyepiece of the collimator is replaced byline CCD, and the mirror is moved along the focal axis by a PC driven step motor. An efficient method has been designed for finding the optimum MTF value for the focal length based on the least squares approach. The developed system is fullycomputer automated: signal transmission to and from the camera, MTF evaluation based on the line CCD, step motor contorl, etc. The developed system has been applied to a practical camera manufacturing process and demonstrated its performance

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1235-1238
• /
• 2003

A rule-based CAPP(computer aided process planning) system is proposed in this research to develop integrated manufacturing process of machining and inspection using OMM(On-Machine Measurement) device. Generally workpiece composed of many primitive form features. This features are determined optimum inspection sequence by analyzing the feature information such as features-relationship, probe approach direction and etc. Proposed paper is more efficient method of CAIP(computer aided inspection planning) considered machining process

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1528-1534
• /
• 2004

The combination of ultrasound echo images with digital particle image velocimetry (DPIV) methods has resulted in a two-dimensional, two-component velocity field measurement technique appropriate for opaque flow conditions including blood flow in clinical applications. Advanced PIV processing algorithms including an iterative scheme and window offsetting were used to increase spatial resolution. The optimum concentration of the ultrasound contrast agent used for seeding was explored. Velocity validation tests in fully developed laminar pipe flow result of echo PIV showed good agreement with both optical PIV measurements and the known analytic solution based on a volume flow measurement.