• 수산해양기술연구
• /
• 제52권4호
• /
• pp.281-289
• /
• 2016

Spinyhead sculpin Dasycottus setiger, a species of cold water fish, is distributed along the eastern coastal waters of Korea. A series of fishing experiments was carried out in the waters near Uljin from June, 2002 to November, 2004, using the experimental monofilament gill nets of different mesh sizes (82.2, 89.4, 104.8, and 120.2 mm) to describe the selectivity of the gill net for the fish. The SELECT (Share Each Length's Catch Total) analysis with maximum likelihood method was applied to fit the different functional models (normal, lognormal, and bi-normal models) for selection curves to the catch data. The bi-normal model with the fixed relative fishing intensity was selected as the best-fit selection curve by AIC (Akaike's Information Criterion) comparison. For the best-fit selection curve, the optimum relative length (the ratio of fish total length to mesh size) with the maximum efficiency and the selection range ($R_{50%,large}-R_{50%,small}$) of 50% retention were obtained as 2.363 and 0.851, respectively. The ratios of body girth to mesh perimeter at 100% retention where the selection curve of each mesh size represented the optimum total length were calculated as the range of 0.86 ~ 0.87.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2001년도 추계정기 학술발표회 초록집
• /
• pp.43-48
• /
• 2001

남부지방에서 황금의 맥후작 직파 재배시 재식밀도가 생육과 수량에 미치는 영향을 구명하여 적정 재식밀도를 확립하고자 시험한 결과는 다음과 같다. 1. 경장은 20$\times$10cm의 밀식 일수록 크고, 30$\times$10cm, 40$\times$10cm의 소식일수록 짧아서 재식주수와 경장은 정의상관이 인정되었다. 2. 경직 경은 30$\times$10cm, 40x loom의 소식일수록 크고 20$\times$10cm의 밀식일수록 작았다. 3, 수량구성요소인 주근장과 수량인 건근중은 30$\times$10cm, 40$\times$10cm의 재식주수가 적을수록 높아서 재식주수와는 부의 상관이 인정되었다. 4.이상과 같은 결과로 보아 경직경이 크고 주근장이 길어서 10a당 건근중이 많은 30$\times$10cm(33주/$m^2$)가 알맞은 재식거리였다.

• 한국자원식물학회지
• /
• 제15권1호
• /
• pp.77-80
• /
• 2002

남부지방에서 황금의 맥후작 직파 재배시 재식밀도가 생육과 수량에 미치는 영향을 구명하여 적정재식 밀도를 확립 하고자 시험 한 결과는 다음과 같다. 1. 경장은 20$\times$10cm의 밀식일수록 크고, 30$\times$10cm, 40$\times$l0cm의 소식일수록 짧아서 재식주수와 경장은 정의 상관이 인정 되었다. 2. 경직경은 30$\times$l0cm, 40$\times$l0cm의 소식일수록 크고 20$\times$10cm의 밀식일수록 작았다. 3. 수량구성 요소인 주근장과 수량인 건근중은 30$\times$l0cm, 40$\times$10cm의 재식주수가 적을수록 높아서 재식주수와는 부의 상관이 인정되었다. 4. 이상과 같은 결과로 보아 경직경이 크고 주근장이 길어서 10a당 건근중이 많은 30$\times$10cm(33주/$m^2$)가 알맞은 재식거리였다.

• 대한화학회지
• /
• 제40권9호
• /
• pp.630-634
• /
• 1996

양배추 포스포리파제 D의 기질특이성을 조사하기 위해 아실 사슬길이가 틀린 코린 인지질을 사용하여 그 반응성을 검토하였다. 선택한 아실 사슬은 포화지방산 $C_8:0,\;C_{12}:0,\;C_{16}:0,\;C_{20}:0$이었다. 이들 인지질들의 반응성은 계면활성제 Sodium dodecyl sulfate의 농도에 따라 큰 영향을 받았으며, 아실 사슬길이가 길어짐에 따라 최적 PC : SDS의 농도비는 1:1.4, 1:2.2, 1:2.5, 1:3.6으로 나타났다. 이와 함께, 효소의 최적활성을 나타내는 온도도 길이가 길어짐에 따라 20$^{\circ}C$, 30$^{\circ}C$, 35$^{\circ}C$, 45$^{\circ}C$로 크게 변화하였다. 이와는 달리 최적 pH와 $Ca^{2+}$농도는 사슬길이에 따라 큰 영향을 받지 않았다. $V_{max}$ 값은 아실 사슬의 기질이 가장 커 가수분해가 잘 일어남을 보여주었으며 사슬길이가 길어질수록 반응속도는 감소하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.151-160
• /
• 2004

Genetic algorithm is the theory of grafting the principle of survival of the fittest in genetics on to the computer algorithm and it is used to solve the optimization problems, especially the shape and size optimization of the structure in Architectural problems. In the size optimization problem discrete variables are used, but series variables have to be used in the shape optimization problem because of the incongruenty. The purpose of this study is to obtain the optimum shape of cable domes by using the real coding genetic algorithm. Generally, the structural performance of the cable domes is influenced very sensitively by pre-stress, geometry and length of the mast because of its flexible characteristic. So, it is very important to decide the optimum shape to get maximum stiffness of cable domes. We use the model to verify the usefulness of this algorithm for shape optimization and analyze the roof system of Seoul Olympic Gymnastic Arena as analytical model of a practical structures. It is confirmed lastly that the optimum shape domes have more stiffness than initial shape ones.

• The Journal of the Acoustical Society of Korea
• /
• 제15권2E호
• /
• pp.33-38
• /
• 1996

This paper provides an approach for representing an optimum vector quantizer by a scalar nonlinear gain-plus-additive noise model. The validity and accuracy of this analytic model is confirmed by comparing the calcuated model quantization errors with actual simulation of the optimum Linde-Buzo-Gray(LBG) vector quantizer. Using this model we frm MSE measure of an M-band filter bank codec in terms of the equivalent scalar quantizatin model and find the optimum FIR filter coefficients for each channel in the M-band structure for a given bit rate, given filter length, and given input signal correlation model. Specific design examples are worked out for 4-tap filters in the two-band paraunitary case. These theoretical results are confirmed by extensive Monte Carlo simulation.

• 전기학회논문지P
• /
• 제58권2호
• /
• pp.227-230
• /
• 2009

In this paper, we performed the optimum design of reactors for matrix-type superconducting-fault current limiters (SFCLs), using electromagnetic analysis tools. We decided a optimun position within a reactor for superconducting elements of current-limiting parts and trigger parts from the calculation of magnetic flux internsity for reactor structures. Also we decided effective distance length between two reactors through the analysis of the distribution of magnetic field, according to distance lengths between them. We designed and characterized matrix-type SFCLs, based on our optimum design of a reactor. We confirmed uniform distribution of a fault current, resulted from the improvement of simultaneous quench characteristics within our matrix-type SFCL.

• 한국정밀공학회지
• /
• 제29권4호
• /
• pp.469-478
• /
• 2012

This study aims to discover the optimal pipe layout for a ship, which generally needs a lot of time, efforts and experiences. Genetic algorithm was utilized to search for the optimum. Here the optimum stands for the minimum pipe length between two given points. Genetic algorithm is applied to planar pipe layout problems to confirm plausible and efficiency. Sub-programs are written to find optimal layout for the problems. Obstacles are laid in between the starting point and the terminal point. Pipe is supposed to bypass those obstacles. Optimal layout between the specified two points can be found using the genetic algorithm. Each route was searched for three case models in two-dimensional plane. In consequence of this, it discovered the optimum route with the minimized distance in three case models. Through this study, it is possible to apply optimization of ship pipe route to an actual ship using genetic algorithm.

• Structural Engineering and Mechanics
• /
• 제13권1호
• /
• pp.1-16
• /
• 2002

This paper presents the findings of an investigation carried out to determine the most appropriate connections, in terms of rotational stiffness, to use for the optimum design of cold-formed Zed section sleeve joint purlin system. Experiments and parametric studies were conducted to investigate the effects of geometric variables on the behavior of the sleeve-purlin and cleat-purlin connections of the sleeve joint purlin system. The variables considered were purlin size and thickness, sleeve size, thickness, length and bolt position. The test results were used to verify the empirical expressions, developed herein, employed to determine the rotational stiffness of connections. With the predicted connection stiffness, the most suitable sleeve-purlin and cleat-purlin connections can be selected so as to produce an optimum condition for the sleeve joint purlin system.

• Journal of the Korean Statistical Society
• /
• 제18권2호
• /
• pp.125-134
• /
• 1989

This paper presents optimum simple step-stress accelerated life test plans for the case where the test process is observed periodically at intervals of the same length. Two types of failure data, periodically observed complete data and periodically observed censored data, are considered. An exponential life distribution with a mean that is a log-linear function of stress, and a cumulative exposure model for the effect of changing stress are assumed. For each type of data, the optimum test plan which minimizes the asymptotic variance of the maximum likelihood estimator of the mean life at a design stress is obtained and its behaviors are studied.