• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.72-79
• /
• 2003

The impregnated activated carbons were prepared by the incipient wetness method with the contents of $KIO_3$ varied from 1.0${\sim}$10 wt% as the impregnation material. The specific surface area and micropore volume of the rice hulls activated carbon were $2,600{\sim}2,800$ $m^2$/g and 1.1${\sim}$1.4 cc/g, respectively. With increasing the contents of impregnation materials, the surface area and micropore volume decreased by 3${\sim}$21%. However, The amounts of hydrogen sulfide adsorbed increased by 2.1${\sim}$2.8 times depending on the impregnation content. The optimum contents of $KIO_3$ were 2.4 wt%. Although the breakthrough time and adsorption capacity of hydrogen sulfide decreased with increasing temperature in the case of the unimpregnated activated carbons, they increased by 1.2${\sim}$ 3.2 times for the case of the impregnated activated carbons. The optimum aspect ratio(L/D) was 1.0 and the adsorption amount of hydrogen sulfide enhanced with increasing the gas flow rate. The regeneration temperature was determined as 400$^{\circ}C$ from the TGA experiment. The adsorption capacity of hydrogen sulfide with the impregnated activated carbon decreased gradually as the regeneration continued. The hydrogen sulfide adsorption amount of the regenerated activated carbon up to 4 times was still higher than that of the unimpregnated activated carbon.

• 한국식품조리과학회지
• /
• 제21권4호
• /
• pp.514-527
• /
• 2005

The purposes of this study were firstly to optimize the recipe for iced cookies by cooking with five different ingredient levels of $Jinuni\;bean(X_1),\;butter(X_2)\;&\;sugar(X_3)$ and secondly to analyze the chemical and sensory test results by using RSM(Response Surface Methodology). As a result of this test, water activity decreased with increasing contents of butter or sugar, while hydrophilic browning decreased independently with increasing sugar content. There was a positive correlation(p<.001) between specific gravity and hardness, although the result was not uniform due to the interaction of each factor. There was a negative correlation(p<.001) between the spread ratio and gravity or hardness, and it tended to increase with increasing each content. Color value L and color value a had positive correlation (p<.001) and the value tended to decrease with increasing the quantity of Jinuni bean. Generally, the strength of the cookies showed a saddle point at the peak of the 3d graph. As a result of sensory evaluation, the color was sensitive to the contents of sugar and Jinuni bean, the texture was sensitive to the contents of butter and sugar, and the taste and overall quality were sensitive to all three factors. Color had a positive correlation(p<.05) with the taste, texture and overall quality. There were high positive correlations(p<.001) between the taste, texture and overall quality. The preference data showed an up-swollen, parabolic shape in the center of the 34 graph, which enabled the optimum value to be determined and the optimum mixture ratio which fulfilled all sensory items was Jinuni bean 93g, butter 188.5g and sugar 155g, indicating a substitution of flour by $44\%$.

• Fisheries and Aquatic Sciences
• /
• 제1권2호
• /
• pp.180-186
• /
• 1998

A 10-week feeding experiment was conducted to determine the phosphorus requirement of juvenile Korean rockfish (Sebastes schlegeli). Three replicate groups of fish initially averaging 4.2g were fed the semipurified experimental diets containing graded levels of $NaH_2PO_4\;\cdot\;2H_2O$ to provide from $0.1\%$ to $1.32\%$ total phosphorus level in a flow-through seawater system. Korean rockfish muscle and casein were used as the protein sources of the basal diet. Weight gain, feed efficiency and protein retention of fish fed the $0.35\%$ phosphorus were higher than those of fish fed the $0.1\%$ phosphorus, although no significant improvements $(P>0.01)$ were observed above the level. Determined phosphorus requirement using the broken line model was found to be $0.3\%$ for weight gain. Moisture, protein and lipid contents of whole body and muscle were not affected by dietary phosphorus levels $(P>0.01)$. Lipid contents of liver in fish fed the $0.1\%$ phosphorus were lower than those in fish fed the $0.35\%$ and $1.32\%$ phosphorus $(P<0.01)$. Dietary phosphorus increased ash and phosphorus contents of the whole body, while those of bone were not affected $(P>0.01)$. The data obtained in this study indicate that a $0.3\%$ dietaryphosphorus level could be recommended for the optimum growth and efficient nutrient utilization of juvenile Korean rockfish.

• 콘크리트학회지
• /
• 제5권4호
• /
• pp.145-155
• /
• 1993

본 연구는 섬유보강 플라이애쉬$\cdot$석회$\cdot$석고 복합체의 역학적 특성을 실험적으로 구명하고, 그 제조방법을 제시한 것이다. 플라이애쉬$\cdot$석회$\cdot$석고 복합체는 PAN계 및 Pitch계 탄소섬유, 내알카리성 유리섬유와 폴리머 분산제를 사용하여 제조하였고, 배합조건별로 그 특성을 검토하였다. 연구결과, 플라이애쉬$\cdot$석회$\cdot$석고 복합체의 제조를 위한 소요서의 컨시스턴시와 강도를 얻기 위한 최적배합을 제안하였다. 또한, 섬유보강 플라이애쉬 석회 석고 복합체의 휨강도 및 휨인성은 섬유의 종류에 관계없이 섬유혼입율의 증대에 따라 현저히 개선되었으며, 압축강고는 섬유혼입율보다는 점유의 종류에 따라 크게 영향을 받았다. 한편, 폴리머 분산제를 혼입한 PAN계 탄소섬유보강 플라이애쉬$\cdot$석회$\cdot$석고 복합체의 비중은 폴리머 분산제의 혼입에 의해 크게 감소하였고, 동복합체의 압축강도, 휨강도 및 휨인성은 폴리머에 의한 영향은 거의 없고 섬유혼입율은 증대에 따라 현저히 개선되는 것으로 나타났다.

• ALGAE
• /
• 제28권1호
• /
• pp.101-109
• /
• 2013

Some Chlorella species grow heterotrophically with organic substrate in dark condition. However, heterotrophic Chlorella species are limited and their optimum culture conditions are not fully known. In this study, three heterotrophic Chlorella species, two strains (C4-3 and C4-4) of C. vulgaris and one Chlorella sp. (C4-8) were examined on optimum culture conditions such as carbon source, temperature, and concentrations of nitrogen and phosphorus in Jaworski's medium (JM). And the growth and fatty acid composition of Chlorella were analyzed. For three heterotrophic Chlorella species, glucose (1-2%) as a carbon source only increased the growth and the range of optimum culture temperature was $26-28^{\circ}C$. Doubled concentrations of the nitrogen or phosphorus in JM medium also improved the growth of Chlorella. Chlorella cultured heterotrophically showed significantly higher growth rate and bigger cell size than those autotrophically did. C. vulgaris (C4-3) cultured heterotrophically showed the highest biomass in dry weight ($0.8g\;L^{-1}$) among three species. With respect to fatty acid composition, the contents of C16:0 and n-3 highly unsaturated fatty acid (HUFA) were significantly higher in autotrophic Chlorella than in heterotrophic one and those of total lipid were not different between different concentrations of nitrogen and phosphorus in JM medium. Among three Chlorella species in this study, C. vulgaris (C4-3) appeared to be the most ideal heterotrophic Chlorella species for industrial application since it had a high biomass and lipid content.

• The Korean Journal of Ecology
• /
• 제6권3호
• /
• pp.227-235
• /
• 1983

This research was made over drought resistance and optimum soil moisture needed with Plantago asiatica L. as the material by means of making out the process of its growth under different soil moisture contents. The soil used for the experiment was a mixture of vermiculite and c-layer soil, and the process of growth was compared with each other controlling its soil mositure as: 7%, 15%, 30%, 45%, and 60%. In 7% range of soil moisture which was of low content, the increase of growth was neither significantly indicated nor any permanent seeding done. In view of this phenomenon, Plantago asiatica L. appeared to be highly drought-resistant. It was found rising at 30% range and reaching the optimum state at 45% range and falling down at 60% range range. In viw of this fluctuation indicated above, the optimum soil moisture content needed for the growth of Plantago asiatica L. is thought to be between 30% and 60%. It is thought the number of seed per capsule is not affected by the soil moisture content. It is expected an ecotypic variation by the soil moisture content will bring forth upon Plantago asiatica L.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

• 상하수도학회지
• /
• 제24권5호
• /
• pp.581-593
• /
• 2010

The objectives of this study were to investigate the effects of raw water pH and basicity of coagulants on turbidity removal with several raw waters having different level of turbidity, alkalinity and pH. Raw waters were sampled from M, S and B water treatment plants(WTP) located at Miryang, Nakdong, Han river, respectively. Six coagulants which have different levels of basicity and aluminum contents were used for this evaluation. High basicity of the coagulant helped to properly control coagulation processes for treating turbid and low alkali raw water. It was difficult for operators to determine optimum coagulant dose for high basicity coagulants, since residual turbidity tended to decrease continuously as coagulant dose increased. Turbidity removal efficiencies with high basicity coagulants(E and F) were higher than the other coagulants at ambient pH for the M WTP. Turbidity removal efficiencies, however, at adjusted pH 7.0 showed similar among six coagulants. Residual turbidity kept low at excess dosages with high basicity coagulants. Optimum coagulant dosages at adjusted pH 7.0 showed higher than those at ambient pH in M WTP. On the contrary in B WTP, optimum coagulant dosage at ambient pH were higher than that at adjusted pH 7.0.

• 태양에너지
• /
• 제2권1호
• /
• pp.49-58
• /
• 1982

Aim of this study was to obtain the heating performance and the economic evaluation on solar heating system for greenhouse which area of floor was $90m^2$. For heating performance effective solar energy for the greenhouse was compared with overall heating loads including coefficient of heat transfer and conduction. And the economic evaluation solar heating system was evaluated by comparison its initial investiment costing with oil saving cost. Initial investiment costing included collector cost, storage cost, piping cost, control system cost and miscellaneous costs which included pumps, motors etc. The contents of this study included the survey of climate conditions for solar heating, long-term collector performance and optimum collector area of solar heating system in existing greenhouse. The results are follows: 1. Average horizontal radiation during winter was $2,434Kcal/m^2$ day which was the highest value in this country, so the climate conditions of Suwon was suitable for solar heating. 2. Resulting calculation of the optimum collector area was $30m^2$ and the solar energy accounted for 30% of the overall heating load. 3. The capacity of storage tank required 60 liter per unit area ($m^2$) of solar collector.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.75-83
• /
• 2011

As screen printing is changed by automation recently, could print more exactly. However, must suffer great many trial and error to have still gotten perfect result. By the way, at this step, fair time and money should be invested. Therefore, if search for optimum condition in early time visualizing screen printing process using simulator program before progress printing, is judged that may be correct and gets printing result efficiently. In this paper, searched optimum printing speed and ink viscosity using FLOW-3D program. Also, the result could confirm truth that is agreeing almost with experiment contents. Through this, is thought that may expect extension of screen printing wide application that vivify advantage of screen print if use simulation program.