• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.128-136
• /
• 2001

This paper presents an optimum deck and girder system design for minimizing the life-cycle cost (LU) of steel box girder bridges. The problem of optimum LCC design of steel box girder bridges is formulated as that of minimization of the expected total LCC that consists of initial cost, maintenance cost, expected retrofit costs for strength, deflection, and crack. To demonstrate the effect of LCC optimum design of steel box girder bridges, the LCC optimum design is compared with conventional design method for steel box girder bridges design. From the numerical investigations, it may be positively stated that the optimum design of steel box girder bridges based on LCC will lead to more rational, economical and safer design.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.3
• /
• pp.183-190
• /
• 1992

The Collins cryocooler is numerically analysed with the optimization technique, and the optimum operating and design conditions are searched. This paper shows that liquefied helium quantity has an external maximum w.r.t. the total mass flow rate, the mass flow rates through expander and the capacities of heat exchangers. The liquefied helium quantity increases as the compressor exit pressure of the cryocooler does. The maximum quantity of liquefied helium and the maximum coefficient of performance have been found to exist in extremum, depending on the ratios of each heat exchanger capicities to the total one. At the optimum condition, the capacity of heat exchanger in high temperature region is larger than that in low temperature region.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.1-8
• /
• 1999

This study was conducted to collect data concerning the preferred driving postures and adopted seat adjustment levels and to grasp relationships among drivers' body sizes, postural angles, and adopted seat positions and angles. Also optimum driving posture and seat adjustment level estimation models were constructed. An experiment was conducted to investigate observed optimum driving posture, and seat adjustment level. Thirty-six subjects (male=20, female=16) was selected to include a wide range of percentiles in the dimensions important for automotive driving workstation design and to be representative of the automotive driving population in Korea. New guidelines and estimation models for optimum postural comfort were developed. There were significant differences between male and female in postural angles but not in seat adjustment levels. Taller subjects preferred a more open and reclined posture. Estimation models enable us to estimate the quantitative optimum driving posture and seat adjustment level with some drivers' physical dimensions.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.227-232
• /
• 2006

This paper investigate the optimum thickness distribution of plate structure with different essential boundary conditions in the fundamental natural frequency maximization problem. In this study, the fundamental natural frequency is considered as the objective function to be maximized and the initial volume of structures is used as the constraint function. The computer-aided geometric design (CAGD) such as Coon's patch representation is used to represent the thickness distribution of plates. A reliable degenerated shell finite element is adopted calculate the accurate fundamental natural frequency of the plates. Robust optimization algorithms implemented in the optimizer DoT are adopted to search optimum thickness values during the optimization iteration. Finally, the optimum thickness distribution with respect to different boundary condition

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.151-156
• /
• 2008

It is necessary to perform the research works on the general structural designs and optimum structural designs of double hull tankers and bulk carriers due to the newly built Common Structural Rules(CSR). In this study, an optimum structural design of a mid-ship part of double hull oil tanker was carried out by using the CSR. An optimum structural design program was developed by using the Pareto optimal based multi-objective function method. The hull weight and fabrication cost obtained by the single and multi-objective function methods were compared with existing ship by the consideration of CSR and material cost which is recently increasing.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.690-695
• /
• 2002

Two plate girders bridge has an advantage for execution of works and quality control because of its simplicity of super-structure caused by decreasing in amount of members and also is distinguished as aesthetic bridge type. Recently this has been adopted for structure of highway as well railway and introduced into domestic. In order to plan or design two plate girders bridge more rationably, it is necessary to comprehend its structural behavior as well as to consider the critical resign factors. Thus, in this study the formulation of optimum design for two plate girders bridge is proposed and the critical resign variables ani restraints are considered and founded by caring out optimum design. The objective function of optimization is formulated as a minimum cost design problem. And the thickness and length of I-shaped section are decided as resign variables. The design constraints are formulated based on Design Criteria for Railroad(Bridges). By comparing the optimum results with those of the conventional resign, the effectiveness of proposed optimum design formulation is investigated. From the results, the way to do optimum design of two plate girders bridge is suggested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.374-378
• /
• 2003

The asymptotic performance of the two-sample locally optimum rank detector for random signals buried in signal-dependent noise and additive noise is consigered in this paper. It is shown that the locally optimum rank detector, a nonparametric detector, has reasonable asymptotic performance for a class of correlated random signals, compared with the locally optimum detector. It is noteworthy that the the two-sample locally optimum rank detector perform almost the same with the one-sample locally optimum rank detector.

• Journal of the Korean Society of Safety
• /
• v.6 no.1
• /
• pp.5-13
• /
• 1991

Fail-safe design of machine elements or structural members is very aim of the whole mankind. Fracture occurs generally from cracks that exist originally or produced from flaws. The most important job we have to do is to make stopping or decreasing the crack growth rate. For fail-safe design variable thickness plates have been used as structural members in practical engineering services. In this paper, optimum design of CT type plate with varlng thickness is studied with the theoritical analysis. The theoritical analysis was based on the stress concentration and nominal stress analysis. From the study, the optimum design curve was determined for use of designing of such structures using the computer analysis program of optimum design.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.1
• /
• pp.113-124
• /
• 1997

Based on the recent developments of the reliability-based structural analysis and design as well as the extending knowledge on the probabilistic characteristics of load and resistances, the probability based design criteria have been successfully developed for many standards. Since the probabilistic characteristics depend highly on the local load and resistances, it is recognized to develop the design criterion compatible with domestic requirements. The existing optimum design methods, which are generally based on the structural theory and certain engineering exprience, do not realistically consider the uncertainties of load and resistances and the basic reliability concepts. This study is directed to propose a optimum design based Expected Total Cost Minimization on two-way slab system which could possibly replace optimum design based traditional provisions of the current code, based on the AFOSM reliablity theory.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.1
• /
• pp.57-65
• /
• 2012

The purpose of this study was to determine the optimum amounts of vegetables to use for flavoring chicken head soup base. The effects of the amounts of ginger and onion on the sensory properties of chicken head soup base were examined, and the optimum amounts were determined using response surface methodology. Sensory properties that were evaluated were yellowness, turbidity, bloody flavor, chicken-brothiness, organ meat-like flavor, and sweet taste. The increased amounts of ginger and onion led to a decrease in bloody flavor and organ meat-like flavor. The optimum levels of ginger and onion were determined to be 40g and 50g, respectively. Chicken head soup base prepared with optimum amounts of vegetables contained more arginine, tryptophan, inosine monophosphate (IMP), and hypoxanthine than plain chicken head soup base. It also had less hexanal, which is related to fat rancidity.