• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.10
• /
• pp.1280-1285
• /
• 1995

In this paper the optimized overlap driving scheme for improving the reduction problem of the operating voltage range occured by the overlap driving scheme proposed precedently and increasing the contrast ratio of screen image in the simple matrix LCDs is proposed. The characteristic estimation of the proposed method was performed in a condition that the number of scan electrodes was 120 and the threshold voltage of LC pixel was 2V and the overlap rate of scan signal was varied from 0% to 40% . As a result of estimation compared with the overlap driving scheme proposed precedently, this new method was certified as a method which it could increase the operating voltage range of the LC pixel by 16% in 20% overlap condition and it's operating voltage range was also increased very much with the increase of the overlap rate. Consequently this newly proposed method was certified as a method which it could maintain the improvement effect of the operating characteristics obtained by the overlap driving scheme proposed precedently with the big improvement in the contrast ratio of screen image.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.759-762
• /
• 2012

Carrier aggregation is an essential feature in the Long Term Evolution-Advanced (LTE-A) system, which allows the scalable expansion of the effective bandwidth to be delivered to user equipment (UE) through the concurrent use of radio resources across multiple component carriers (CCs). This system's optimal radio-resource use has received much attention under simultaneous access (SA) scenarios for multiple CCs (m-CCs). This letter establishes how many CCs a UE should simultaneously connect to maintain maximum uplink capacity. Under the m-CC LTE-A system, the spectral efficiency of the m-CC SA scheme ($m{\geq}2$) is compared with that of CC selection (CCS). Numerical results reveal that the 2-CC SA scheme outperforms CCS and performs almost equally to the m-CC SA scheme ($m{\geq}3$).

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.256-264
• /
• 2015

Energy harvesting devices have been proposed for sensor networking applications where batteries cannot be replaced, and cooperative communication schemes have been used to increase energy efficiency for wireless systems. Here, we develop transmission scheduling schemes for multi-terminal cooperative energy harvesting networks that maximize the packet delivery ratio, i.e., the probability that an event is reported successfully. We see that the proposed scheme provides virtually the same performance as the state-of-the-art threshold-based scheme, but does not require auxiliary parameter optimization. The proposed scheme also permits extensions to multiple cooperating nodes and sources, and it can be modified to accommodate fairness constraints.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.453-458
• /
• 2010

In the paper, we propose an energy efficient sensor network management scheme. In the proposed scheme, the modified game theory and ${\varepsilon}$-constraint techniques are sophisticatedly combined to establish energy efficient routing paths. Simulation results indicate that the proposed scheme can strike an appropriate performance balance between conflicting requirements while other existing schemes cannot offer such an attractive performance.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.454-458
• /
• 2008

This article describes an interference reduction scheme for Mobile WiMAX in an indoor environment. The feasibility of user deployed femtocells in the same frequency channel as an existing macro cell network is investigated. One of the important requirements for co-channel operation of femtocells such as auto-configuration and self optimization are discussed. In femtocell deployments, leakage of the pilot signal to the outside of a house can result of the higher number of mobility events caused by passing user of macrocell. This interference effect can be minimized by reducing the pilot power using proper scheme. This paper introduces existing auto-configuration method of power control and proposed interference reduction scheme using power control for Mobile WiMAX in an indoor environment.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.335-340
• /
• 2021

A constant envelope multiplexing via constellation tailoring scheme is proposed for flexible power allocation of Global Navigation Satellite System (GNSS) signals. The proposed scheme is compared with the coherent adaptive subcarrier modulation (CASM) adopted in the L1 band signals of the Global Positioning System (GPS) in terms of power difference and power loss. Analysis of the constellation optimization results on the power difference and power loss show that the proposed scheme outperforms the CASM of the GPS signals in the allowable power difference of less than 0.1 dB.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1513-1519
• /
• 2013

A genetic algorithm (GA) is an optimization technique based on natural evolution theory to find the global optimal solution. Unlike the gradient-based method, it can design nanoscale structures in the electric field because it does not require sensitivity calculation. This research intends to design a nanoaperture with an unprecedented shape by the topology optimization scheme based on the GA and ON/OFF method in the visible frequency range. This research mainly aims to maximize the transmission rate at a measuring area located 10nm under the exit plane and to minimize the electric distribution at other locations. The finite element analysis (FEA) and optimization process are performed by using the commercial package COMSOL combined with the Matlab programming. The final results of the optimized model are analyzed by a comparison of the electric field intensity and the spot size of near field with those of the initial model.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1108-1121
• /
• 2019

The non-inverting buck-boost converter (NIBB) is a step-up and step-down DC-DC converter suitable for wide-input-voltage-range applications. However, when the input voltage is close to the output voltage, the NIBB needs to operate in the buck-boost mode, causing a significant efficiency reduction since all four switches operates in the PWM mode. Considering both the current stress limitation and the efficiency optimization, a novel design methodology for the optimal phase-shift modulation of a NIBB in the buck-boost mode is proposed in this paper. Since the four switches in the NIBB form two bridges, the shifted phase between the two bridges can serve as an extra degree of freedom for performance optimization. With general phase-shift modulation, the analytic current expressions for every duty ratio, shifted phase and input voltage are derived. Then with the two key factors in the NIBB, the converter efficiency and the switch current stress, taken into account, an objective function with constraints is derived. By optimizing the derived objective function over the full input voltage range, an offline design methodology for the optimal modulation scheme is proposed for efficiency optimization on the premise of current stress limitation. Finally, the designed optimal modulation scheme is implemented on a DSPs and the design methodology is verified with experimental results on a 300V-1.5kW NIBB prototype.

• Smart Structures and Systems
• /
• v.31 no.3
• /
• pp.247-257
• /
• 2023

In structural health monitoring of large-scale structures, optimal sensor placement plays an important role because of the high cost of sensors and their supporting instruments, as well as the burden of data transmission and storage. In this study, a vibration sensor placement algorithm based on deep reinforcement learning (DRL) is proposed, which can effectively solve non-convex, high-dimensional, and discrete combinatorial sensor placement optimization problems. An objective function is constructed to estimate the quality of a specific vibration sensor placement scheme according to the modal assurance criterion (MAC). Using this objective function, a DRL-based algorithm is presented to determine the optimal vibration sensor placement scheme. Subsequently, we transform the sensor optimal placement process into a Markov decision process and employ a DRL-based optimization algorithm to maximize the objective function for optimal sensor placement. To illustrate the applicability of the proposed method, two examples are presented: a 10-story braced frame and a sea-crossing bridge model. A comparison study is also performed with a genetic algorithm and particle swarm algorithm. The proposed DRL-based algorithm can effectively solve the discrete combinatorial optimization problem for vibration sensor placements and can produce superior performance compared with the other two existing methods.

• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.1031-1043
• /
• 2016

Optimization of the construction scheme of the cable-strut tensile structure based on error sensitivity analysis is studied in this paper. First, the element length was extracted as a fundamental variable, and the relationship between element length change and element internal force was established. By setting all pre-stresses in active cables to zero, the equation between the pre-stress deviation in the passive cables and the element length error was obtained to analyze and evaluate the error effects under different construction schemes. Afterwards, based on the probability statistics theory, the mathematical model of element length error is set up. The statistical features of the pre-stress deviation were achieved. Finally, a cable-strut tensile structure model with a diameter of 5.0 m was fabricated. The element length errors are simulated by adjusting the element length, and each member in one symmetrical unit was elongated by 3 mm to explore the error sensitivity of each type of element. The numerical analysis of error sensitivity was also carried out by the FEA model in ANSYS software, where the element length change was simulated by implementing appropriate temperature changes. The theoretical analysis and experimental results both indicated that different elements had different error sensitivities. Likewise, different construction schemes had different construction precisions, and the optimal construction scheme should be chosen for the real construction projects to achieve lower error effects, lower cost and greater convenience.