• Structural Engineering and Mechanics
• /
• 제7권1호
• /
• pp.19-33
• /
• 1999

The critical buckling loads of unsymmetrically laminated rectangular plates with a given material system and subjected to combined lateral and inplane loads are maximized with respect to fiber orientations by using a sequential linear programming method together with a simple move-limit strategy. Significant influence of plate aspect ratios, central circular cutouts, lateral loads and end conditions on the optimal fiber orientations and the associated optimal buckling loads of unsymmetrically laminated plates has been shown through this investigation.

• 한국콘텐츠학회논문지
• /
• 제8권1호
• /
• pp.290-299
• /
• 2008

본 논문에서는 하이브리드 공간 DBMS에서 질의 분류를 이용한 최적화 기법을 제안한다. 제안 기법은 질의에 이용되는 데이터의 위치에 따라 메모리 질의, 디스크 질의, 하이브리드 질의로 분류하여 처리한다. 특히, 하이브리드 질의의 경우에는 실체화 뷰의 사용률을 높이기 위해 실체화 뷰 생성 조건과 사용자 질의 조건을 비교하여 술어를 분할하는 메커니즘을 적용한다. 또한 질의를 최적화하기 위해 분류된 질의의 비용 계산 결과를 이용하여 최소 비용의 데이터 접근 경로를 선택할 수 있는 데이터 접근 경로 선택 알고리즘을 제안한다. 제안 기법은 대용량 데이터 관리와 빠른 응답 속도를 동시에 만족하는 하이브리드 공간 DBMS의 성능을 기존의 디스크 기반 공간 DBMS보다 최소 20%에서 최대 50%의 성능 향상을 보인다.

• Journal of Microbiology and Biotechnology
• /
• 제8권1호
• /
• pp.81-88
• /
• 1998

The determination of appropriate parameters and parameter conditions is very important for the optimization of production of target materials. Taguchi's method has been used widely as the basis for development trials and optimization during industrial process design. Reaction variables which influence product yield are easily determined and their effects are revealed by just a few reactions, negating the need for extensive experimental investigation. There are usually some factors that are responsible for variations in process characteristics, so called noise factors. Controlling noise factors is very costly and difficult or impossible. Taguchi's experimental design method was examined to determine the control factor's level that is less sensitive to the changes in environmental conditions and other noise factors without control of noise factors. In this study, optimization of lipase-catalyzed production of lysophosphatidic acid (LPA) which has various physiological functions was performed by Taguchi's method. We obtained LPA yields ($66.5\%$) with low variance (5.32) at 400 RPM, molar ratio of 40 : 3 (mol) (fatty acid: G-3-P), 48 h, and $50^{\circ}C$. Thus, bioactive LPA with a desired fatty acid moiety could be produced with high yields and low variance despite various environmental noise factors.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.20-33
• /
• 2010

The paper deals with strength design of a riser support installed on floating production storage and offloading (FPSO) vessel under various loading conditions - operation, extreme, damaged, one line failure case (OLFC) and installation. The design problem is formulated such that thickness sizing variables are determined by minimizing the weight of a riser support structure subject to stresses constraints. The initial design model is generated based on an actual FPSO riser support specification. The finite element analysis (FEA) is conducted using MSC/NASTRAN, and optimal solutions are obtained via moving least squares method (MLSM) in the context of response surface based approximate optimization. For the meta-modeling of inequality constraint functions of stresses, a constraint-feasible moving least squares method (CF-MLSM) is used in the present study. The method of CF-MLSM, compared to a conventional MLSM, has been shown to ensure the constraint feasibility in a case where the approximate optimization process is employed. The optimization results present improved design performances under various riser operating conditions.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.243-256
• /
• 2018

This study conducts an optimization and sensitivity analysis on rectangular reinforced concrete (RC) beam using Lagrangian Multiplier Method (LMM) as programming optimization computer soft ware. The analysis is conducted to obtain the minimum design cost for both singly and doubly RC beams according to the specifications of three regulations of American concrete institute (ACI), British regulation (BS), and Iranian concrete regulation (ICS). Moreover, a sensitivity analysis on cost is performed with respect to the effective parameters such as length, width, and depth of beam, and area of reinforcement. Accordingly, various curves are developed to be feasibly utilized in design of RC beams. Numerical examples are also represented to better illustrate the design steps. The results indicate that instead of complex optimization relationships, the LMM can be used to minimize the cost of singly and doubly reinforced beams with different boundary conditions. The results of the sensitivity analysis on LMM indicate that each regulation can provide the most optimal values at specific situations. Therefore, using the graphs proposed for different design conditions can effectively help the designer (without necessity of primary optimization knowledge) choose the best regulation and values of design parameters.

• 설비공학논문집
• /
• 제17권10호
• /
• pp.938-946
• /
• 2005

Shape optimization of internally finned circular tube has been peformed for periodically fully developed turbulent flow and heat transfer. The physical domain considered in this study is very complicated due to periodic boundary conditions both streamwise and circumferential directions. Therefore, Pareto frontier sets of a heat exchanger can be acquired by coupling the CFD and the multi-objective genetic algorithm, which is a global optimization technique. The optimal values of fin widths $(d_1,\;d_2)$ and fin height (H) are numerically obtained by minimizing the pressure loss and maximizing the heat transfer rate within ranges of $d_1=0.2\sim1.5\;mm,\;d_2=0.2\sun1.5\;mm,\;and\;H=0.2\sim1.5\;mm$. The optimal values of the design variables are acquired after the fifth generation and also compared to those of a local optimization algorithm for the same geometry and conditions.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.207-216
• /
• 2014

목 적 : 모나코 치료계획 시스템은 몬테카를로 알고리즘을 기반으로 선량을 구현하는 대표적인 시스템이다. 모나코 치료계획 시스템에서 치료계획 완성 후, 같은 조건으로 최적화를 재 실시하여 처음과는 다른 치료계획이 만들어질 때 본 연구는 이러한 차이를 줄이는 방법을 제시하고자 한다. 대상 및 방법 : 모나코 치료계획 시스템은 세기변조방사선치료나 용적변조방사선치료를 위한 역 선량계산을 실시할 때, 두 단계를 거쳐 최적화를 실시한다. 본 연구는 우선 최적화 두 단계를 모두 실시하여 선량으로 완성된 치료계획을, 최적화 조건을 바꾸지 않고 일반적인 1단계부터 2단계까지 순차적 최적화를 실시하였다. 이때 2단계에선 펜슬 빔과 몬테카를로 알고리즘을 각각 적용하여 실험을 실시하였다. 두 가지 알고리즘의 치료계획 모두 처음 완성된 치료계획과 최적화를 재 실시한 치료계획을 비교하고 선량 측정기를 이용하여 치료선량을 평가하였다. 두 번째는 초기 완성된 치료계획에 대하여 최적화를 재 실시할 때 단계적으로 실시하여 치료계획을 완성하고 선량을 측정하였다. 결 과 : 초기 완성된 치료계획에서 동일한 조건으로 일반적인 최적화를 다시 실시한 결과는 동일하지 않았다. 치료계획시스템의 비교에서 보면 유사한 선량-용적 히스토그람은 유사한 경향을 나타내지만 최고선량, 선량 균질도 및 제한 선량 등은 최적화 조건을 만족 시키지 못하는 다른 값을 보였다. 또한 선량측정비교에서도 20%이상 다르게 나타냈다. 또한 선량 알고리즘이 달라져도 다른 측정 값이 나왔다. 반면, 단계적 최적화를 실시 할 경우에는, 초기 치료계획과 비교하였을 때 종양 및 정상 장기의 선량 분포가 5% 이하의 차이를 보였다. 결 론 : 치료계획의 최적화 과정은 수 많은 시행 착오를 수행하며 궁극적인 해를 찾아가는 과정이다. 이때 초기 치료계획의 완성만을 신뢰하며 최적화를 실시하면 또 다른 치료계획이 만들어 질 수 있다. 유사한 경향을 보이긴 하지만, 반드시 최적화 조건을 만족한다고 볼 수 없기 때문에, 최적화 과정을 재 실시할 경우에는 반드시 단계적인 최적화 과정을 통하여 선량분포를 확인하면서 순차적으로 최적화 조건을 적용해야 할 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.377-382
• /
• 2004

This paper presents a novel optimization method for the air- and gas-supplying network comprised of several air compression systems and air and gas streams in an industrial chemical plant. The optimization is based on the hybrid model developed by Han and $Han^1$ for predicting the power consumption of a compression system. A constrained optimization problem was formulated to minimize the total electric power consumption of all the compression systems in the air- and gas-supplying network under various operating constraints and was solved using a successive quadratic optimization algorithm. The optimization approach was applied to an industrial terephthalic acid manufacturing plant to achieve about 10% reduction in the total electric power consumption under varying ambient conditions.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.112-121
• /
• 2009

This paper deals with supersonic air-breathing missile system. A supersonic air-breathing missile system has very complicated and incoherent thrust characteristics with respect to outer and inner environment during operation. For this reason, the missile system has many maneuver constraints and is allowed to operate within narrow flight envelope. In this paper, trajectory optimization of the missile is accomplished. The trajectory optimization problem is formulated as a discrete parameter optimization problem. For this formulation, Legendre Pseudo-Spectral method is introduced. This method is based on calculating the state and control variables on Legendre-Gauss-Lobatto (LGL) points. This approach helps to find approximated derivative and integration quantities simply. It is shown that, for this trajectory optimization, trend analysis is performed from thrust characteristics on various conditions so that the trajectory optimization is accomplished with fine initial guess with these results.

• 한국전산유체공학회지
• /
• 제11권1호
• /
• pp.21-28
• /
• 2006

Reliability Based Design Optimization(RBDO) is one of the optimization methods that minimize the product failure due to small changes of operating conditions or process errors. It searches the optimum that satisfies the safety margin of each constraint, and it gives stable and reliable designs. However, RBDO requires many times oj computational efforts compared with the conventional deterministic optimization(DO) to evaluate the probability of failure about each constraint, therefore it is hard to apply directly to large-scaled problems such as a flexible wing shape design optimization. For the efficient reliability analysis, the approximate reliability analysis method with the two-point approximation(TPA) is proposed In this study, the lift-to-drag ratio maximization designs are performed with 3-dimensional Navier-Stokes analysis and NASTRAN structural analysis, and the optimization results about the deterministic, FORM and SORM are compared.