References
- Atlantia Offshore Limited, (2009). www.atlantia.com/seastar/.
- Belegundu, A.D. and Chandrupatla, T.R. (1999). Optimization Concept and Applications in Engineering. Prentice-Hall, New Jersey.
- Choung, J.M., Joung, J.H., Choo, M.H. and Yoon, K.Y. (2007). "Development of Fully Stochastic Fatigue Analysis Program for Offshore Floaters", Journal of the Society of Naval Architects of Korea, Vol 44, No 4, pp 425-438. https://doi.org/10.3744/SNAK.2007.44.4.425
- De Souza, M.J., Jacob, B.P. and Ellwanger, G.B. (1998). "Structural Design of Process Decks for Floating Production, Storage and Offloading Units", Marine Structures, Vol 11, No 10, pp 403-412. https://doi.org/10.1016/S0951-8339(98)00020-3
- Haftka, R.T. (2006). Using Bootstrap Methods for Conservative Estimations of Probability of Failure, Proceedings of 2006 NSF Design, Service, and Manufacturing Grantees and Research Conference, St. Louis, MO.
- Kim, C. and Choi, K.K. (2008). "Reliability-Based Design Optimization Using Response Surface Method with Prediction Interval Estimation", Journal of Mechanical Design, Vol 130, No 12, pp 121401-12. https://doi.org/10.1115/1.2988476
- Kim, S.I. (2003). "A Study on the Analysis of Welding Distortion for Moon Pool Structure of FPSO Vessel," Journal of Ocean Engineering and Technology, Vol 17, No 3, pp 27-32.
- Lancaster, P. and Salkauskas, K. (1986). Curve and Surface Fitting: An Introduction, Academic Press, New York.
- Lee, J. and Kang, S. (2007). "GA based Meta-Modeling of BPN Architecture for Constrained Approximate Optimization", International Journal of Solids and Structures, Vol 44, No 18-19, pp 5980-5993. https://doi.org/10.1016/j.ijsolstr.2007.02.008
- Lee, J., Jeong, H. and Kang, S. (2008). "Derivative and GA Based Methods in Meta-Modeling of Back-Propagation Neural Networks for Constraint Approximate Optimization", Structural and Multidisciplinary Optimization, Vol 35, No 1, pp 29-40.
- Lee, J., Jeong, H., Choi, D.H., Volovoi, V. and Mavris D. (2007). "An Enhancement of Constraint Feasibility in BPN Based Approximate Optimization", Computer Methods in Applied Mechanics and Engineering, Vol 196, No 17-20, pp 2147-2160. https://doi.org/10.1016/j.cma.2006.11.005
- Lotsberg, I. and Landet, E. (2005). "Fatigue Capacity of Side Longitudinals in Floating Structures", Marine Structures, Vol 18, No 1, pp 25-42. https://doi.org/10.1016/j.marstruc.2005.08.002
- Mangasarian, O.L. (1969). Nonlinear Programming. McGraw-Hill, New York.
- MSC Software (2008). MSC.NASTRAN User's Manual Version 2008.
- Picheny, V., Kim, N.H. and Haftka, R.T. (2008). Conservative Predictions Using Surrogate Modeling, Proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA-2008-1716, IL.
- Ryu, S. and Kim, M.H. (2003). "Coupled Dynamic Analysis of Thruster-Assisted Turret-Moored FPSO", Oceans 2003 MTS/IEEE, San Diego, CA, Vol 3, No 22-26, pp 1613-1620.
- Ryu, S.S., Heyl, C. and Duggal, A. (2009). "Mooring Cost Sensitivity Study Based on Cost-Optimum Mooring Design", Journal of Ocean Engineering and Technology, Vol 23, No 1, pp 1-6.
- Song, C.Y. and Lee, J. (2009). "Strength Design of Knuckle Component using Moving Least Squares Response Surface Based Approximate Optimization Methods", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol 223, No 8, pp 1019-1032.
- Sparks, C.P. (2007). Fundamentals of Marine Riser Mechanics: Basic Principles and Simplified Analysis, PennWell, Oklahoma.
- Wolfe, P. (1961). "A Duality Theorem for Nonlinear Programming", Quarterly of Applied Mathematics, Vol 19, pp 239-244.
- Xu, L., Barltrop, N. and Okan, B. (2008). "Bow Impact Loading on FPSOs 1-Experimental Investigation", Ocean Engineering, Vol 35, No 11-12, pp 1148-1157. https://doi.org/10.1016/j.oceaneng.2008.04.013
- Xu, L. and Barltrop, N. (2008). "Bow Impact Loading on FPSOs 2-Theoretical Investigation", Ocean Engineering, Vol 35, No 11-12, pp 1158-1165. https://doi.org/10.1016/j.oceaneng.2008.04.012
- Zou, T., Mourelatos, Z.P., Mahadevan, S. and Tu, J. (2008). "An Indicator Response Surface Method for Simulation-Based Reliability Analysis," Journal of Mechanical Design, Vol 130, No 7, pp 071401-1-11. https://doi.org/10.1115/1.2918901