• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.571-582
• /
• 1998

The PLS(Partial Least Square) and ANN(Artificial Neural Network) were introduced to develop the soluble solids content prediction model of apples which is followed by making a subsequent selection of photosensor. For the optimal PLS model, number of factors needed for spectrum analysis were increased until the convergence of prediction residual error sum of squares. Analysis has shown that even part of the overall wavelength with no pretreatment may turn out better performing. The best PLS model was found in the 800 to 1,100nm wavelength region without pretreatment of second derivation, having $R^2$=0.9236, bias= -0.0198bx, SEP=0.2527bx for unknown samples. On the other hand, for the ANN model the second derivation led to higher performance. On partial range of 800 to 1,100nm wavelengh region, prediction model with second derivation for unknown samples reached $R^2$=0.9177, SEP=0.2903bx in contrast to $R^2$=0.7507, SEP =0.4622bx without pretreatment.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.479-490
• /
• 1996

To utilize collagen as an implantable biomateriall the mcct widely used bovine skin origin Type I collagen was investigated Pepsin treated, Type I atelocollagen was extracted and crosslinked by the ultraviolet(W) ray with wavelength of 254nm or by various concentrations of glutaraldehyde to produce collagen membranes. The crosslink rates of the specimens were observed by a polarized light microscope, a scanning electron microscope, and a Fourier transform infrared (FT-lR) spectrometer. The followings are concluded 1. The collagen membranes produced by both 2.5% glutaraldehyde solution and 254nm UV ray irra- diation demonstrated similar morphologies on polarized light microscopic and scanning electron microscopic views. 2. The chemical structures of the crosslinked membranes by glutaraldehyde over 2.5% in concentrations revealed similar intensities to that of the UV ray irradiated one in FT-lR investigation. 3. To obtain optimal croulink in bovine stalin origin Type I atelocollagen, 2.5% glutaraldehyde solution or UV ray irradiation with 254nm wavelength is acceptable.

• 한국광학회지
• /
• 제22권3호
• /
• pp.122-128
• /
• 2011

하향신호를 위해서는 반사형 반도체 증폭기를 기반으로 한 광역선폭 광원 기술이 사용되었고 상향신호를 위해서는 파장 재사용 기술이 사용된 양방향 파장분할 다중화 수동 광네트워크 (WDM-PON)가 컴퓨터 시뮬레이션을 통해 구현되었다. 이 시스템에서 세가지 다른 종류의 광필터들이 비교되어 필터링의 영향이 분석되었고, 광 스펙트럼과 아이 다이어그램 (eye diagram)의 분석을 통해 파장 재변조 기술을 최적화 하였다. 최적화된 시스템 조건을 이용하여 양방향 신호의 전송 성능 곡선을 구하였고 이 시스템에서 반사에 의한 신호 왜곡의 영향을 분석하였다.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.16-21
• /
• 2019

We present a broad-bandwidth comb-spacing-swept source (CSWS) based on a differential polarization delay line (DPDL) for interferometric three-dimensional (3D) imaging. The comb spacing of the CSWS is repeatedly swept by the tunable DPDL in the multiwavelength source to provide depth-scanning optical coherence tomography (OCT). As the polarization differential delay of the DPDL is tuned from 5 to 15 ps, the comb spacing along the wavelength continuously varies from 1.6 to 0.53 nm, respectively. The wavelength range of various semiconductor optical amplifiers and the cavity feedback ratio of the tunable fiber coupler are experimentally selected to obtain optimal conditions for a broader 3-dB bandwidth of the multiwavelength spectrum and thus provide a higher axial resolution of $35{\mu}m$ in interferometric OCT imaging. The proposed CSWS-OCT has a simple imaging interferometer configuration without reference-path scanning and a simple imaging process without the complex Fourier transform. 3D surface images of a via-hole structure on a printed circuit board and the top surface of a coin were acquired.

• ETRI Journal
• /
• 제43권5호
• /
• pp.799-811
• /
• 2021

This paper considers a challenging problem: to simultaneously optimize the cost and the quality of service in opaque wavelength division multiplexing (WDM) networks. An optimization problem is proposed that takes the information including network topology, traffic between end nodes, and the target level of congestion at each link/ node in WDM networks. The outputs of this problem include routing, link channel capacities, and the optimum number of switch ports locally added/dropped at all switch nodes. The total network cost is reduced to maintain a minimum congestion level on all links, which provides an efficient trade-off solution for the network design problem. The optimal information is utilized for dynamic traffic in WDM networks, which is shown to achieve the desired performance with the guaranteed quality of service in different networks. It was found that for an average link blocking probability equal to 0.015, the proposed model achieves a net channel gain in terms of wavelength channels (𝛾_w) equal to 35.72 %, 39.09 %, and 36.93 % compared to shortest path first routing and 𝛾_w equal to 29.41 %, 37.35 %, and 27.47 % compared to alternate routing in three different networks.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.370-375
• /
• 2022

Cu-doped ZnSe quantum dots were successfully synthesized in an aqueous solution using an internal doping method. The effects of ligand type, CuSe synthesis temperature, and heating time on Cu-doped ZnSe synthesis were systematically investigated. Of MPA, GSH, TGA, and NAC used as ligands, MPA was the optimal ligand as determined by PL spectrum analysis. In addition, the emission wavelength was found to depend on the synthesis temperature of the internal doping core of CuSe. As the temperature increased, the doping of Cu²⁺ was enhanced, and the emission wavelength band was redshifted; accordingly, the emission peaks moved from blue to green (up to 550 nm). Thus, the synthesis of Cu:ZnSe using internal doping in aqueous solutions is a potential method for ecomanufacturing of color-tuned ZnSe quantum dots for display applications.

• 한국통신학회논문지
• /
• 제29권5A호
• /
• pp.473-483
• /
• 2004

8 채널 ${\times}$ 40 Gbps 파장 분할 다중 (WDM ： Wavelength Division Multiplexing) 시스템에서 색 분산과 자기 위상 변조에 의해 왜곡된 광 펄스를 최상으로 보상할 수 있는 광 위상 공액기 (OPC : Optical Phase Conjugator)의 최적 펌프 광 전력을 채널 입력 전력 변화에 따라 수치 해석적으로 살펴보았다. 또한 OPC의 펌프 전력 변화에 따른 수신단에서 허용 가능한 채널의 최대 입력 전력 크기를 변조 파형 형식, 광섬유 분산 계수에 따라 살펴보았다. 본 논문에서 고찰한 WDM 시스템은 전체 전송 링크 중간에 HNL-DSF (Highly- Nonlinear Dispersion Shifted fiber)를 비선형 매질로 이용한 OPC를 두어 보상하는 경로 평균 강도 근사 (PAIA ： Path-Averaged Intensity Approximation) MSSI (Mid-Span Spectral Inversion) 기법에 기초를 두고 있다. 우선 최소의 눈 열림 패널티를 만드는 HNL-DSF On의 특정 펌프 광 전력의 크기는 변조 파형 형식, 초기 채널 입력 전력, 총 전송 거리, 광섬유분산 등의 복합적인 영향에 따라 다소 변화될 수는 있지만 전력 변환비를 1 근처로 만드는 값에서 결정되어야 한다는 것을 알 수 있었다. 또한 HNL-DSP OPC의 펌프 광 전력이 최소의 EOP를 결과하는 최적의 값이 아닌 다른 값으로 설정되어 있는 경우 양호한 수신을 가능하게 하는 채널의 최대 입력 전력 크기는 광섬유의 분산 계수가 비교적 적은 WDM 시스템에서 변조 파형 형식으로 NRZ보다 RZ를 사통하면 더욱 증가되는 것을 확인할 수 있었다.

• 분석과학
• /
• 제15권5호
• /
• pp.393-398
• /
• 2002

수용액 중의 fluorene 과 anthracene을 동시화 형광분광법을 이용하여 동시에 정량하는 방법에 대하여 연구하였다. 두 화합물 용액에서의 형광특성을 조사하였고, 화합물 혼합용액을 이용하여 동시화 형광스펙트럼을 측정할 때에 파장차이 (${\Delta}{\lambda}$)가 봉우리의 분리에 미치는 영향을 조사한 결과 ${\Delta}{\lambda}$가 50 nm일 때 가장 좋은 봉우리의 분리가 일어났다. 혼합 수용액으로 최적 ${\Delta}{\lambda}$에서 동시화 형광스펙트럼을 측정하여 검정곡선을 작성하였을 때 fluorene의 경우에는 $5.0{\times}10^{-8}M$에서 $1.0{\times}10^{-3}M$, anthracene의 경우에는 $5.0{\times}10^{-8}M$에서 $1.0{\times}10^{-3}M$까지 직선범위 가 성립하였다. Fluorene과 anthracene의 검출한계는 각각 $3.0{\times}10^{-9}M$과 $7.0{\times}10^{-9}M$이었다.

• 대한원격탐사학회지
• /
• 제17권4호
• /
• pp.285-295
• /
• 2001

We developed a CASE-II water model that will enable the simulation of remote sensing reflectance($R_{rs}$) at the coastal waters for the retrieval of suspended sediments (SS) concentrations from satellite imagery. The model has six components which are: water, chlorophyll, dissolved organic matter (DOM), non-chlorophyllous particles (NC), heterotrophic microorganisms and an unknown component, possibly represented by bubbles or other particulates unrelated to the five first components. We measured $R_{rs}$, concentration of SS and chlorophyll, and absorption of DOM during our field campaigns in Korea. In addition, we generated $R_{rs}$ from different concentrations of SS and chlorophyll, and various absorptions of DOM by random number functions to create a large database to test the model. We assimilated both the computer generated parameters as well as the in-situ measurements in order to reconstruct the reflectance spectra. We validated the model by comparing model-reconstructed spectra with observed spectra. The estimated $R_{rs}$ spectra were used to (1) evaluate the performance of four wavelengths and wavelengths ratios for accurate retrieval of SS. 2) identify the optimum band for SS retrieval, and 3) assess the influence of the SS on the chlorophyll algorithm. The results indicate that single bands at longer wavelengths in visible better results than commonly used channel ratios. The wavelength of 625nm is suggested as a new and optimal wavelength for SS retrieval. Because this wavelength is not available from SeaWiFS, 555nm is offered as an alternative. The presence of SS in coastal areas can lead to overestimation chlorophyll concentrations greater than 20-500%.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.29-37
• /
• 2021

A 7 nm technology node using extreme ultraviolet lithography with a wavelength of 13.5 nm has been recently developed and applied to the semiconductor manufacturing process. Furthermore, the development of sub-3 nm technology nodes continues to be required. In this study, design factors of an electrostatic deflector for an ultra-miniaturized microcolumn system that can realize an electron wavelength of below 1.23 nm with an acceleration voltage of above 1 eV were investigated using a three-dimensional simulator. Particularly, the optimal design of the electrostatic octupole floating deflector was derived by optimizing the design elements and improving the driving method of the 1 keV low energy ultra-miniaturized microcolumn deflector. As a result, the entire wide field of view greater than 330 ㎛ at a working distance of 4 mm was realized with an ultra-high-resolution electron beam spot smaller than 10 nm. The results of this study are expected to be a basis technology for realizing a wafer-scale multi-array microcolumn system, which is expected to innovatively improve the throughput per unit time, which is the biggest drawback of electron beam lithography.