• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.197-202
• /
• 2023

Calcium fluoride (CaF₂) single crystal is applied to numerous industrial applications, especially for optical uses. To have excellent optical transmission properties, however, CaF₂ crystals should be carefully fabricated through liquid-phase crystal growth techniques. In this study, as one of the early stage research activities to grow CaF₂ crystals with a good transmittance at the ultraviolet wavelength range, computational thermodynamic models were provided to deepen the understanding of the crystal growing processes of CaF₂ under various conditions. To remove point defects and oxygen impurities in the grown CaF₂ crystals, the system was thermodynamically evaluated to get optimal process conditions. From the reviews of previous experimental studies, computational thermodynamic approaches were found to be an effective and powerful tool to understand the meaning of the crystal growth processes and to obtain optimal process conditions.

• 한국지리정보학회지
• /
• 제25권4호
• /
• pp.210-221
• /
• 2022

재난·재해에 신속하게 대응하기 위하여 다양한 센서의 위성영상 활용이 가능한 뉴스페이스 시대가 열렸다. 국내·외 운용 중인 위성의 수가 늘어나고 위성 센서의 특성이 다양하므로, 재난유형에 최적화된 위성영상을 찾는 것이 필요하다. 재난 유형은 태풍, 호우, 가뭄, 산불 등으로 나누고 각 재난유형별로 위성의 궤도, 능동/수동 센서, 공간 해상도, 파장대, 재방문주기를 고려한 최적의 위성 영상을 선정하였다. 각 위성궤도 TLE(Two Line Element) 정보는 SGP4(Simplified General Perturbations version 4) 모델에 적용하여 위성궤도 시뮬레이션 알고리즘을 개발하였다. 개발된 알고리즘은 위성 궤도를 10초 간격으로 시뮬레이션하고 각 센서의 입사각을 고려하여 정확한 관측영역을 선정하였다. 위성궤도 시뮬레이션 알고리즘을 2019년 태풍 미탁 사례에 적용하여 실제 촬영된 위성 리스트와 비교 및 분석하였다. 분석된 결과를 통해 재난 발생 지역의 촬영된 영상과 촬영 예정인 영상의 시간 및 영역을 수 초 이내 분석하여 재난 유형에 따른 최적의 위성영상을 선정하였다. 향후, 재난이 발생했을 때 위성영상을 신속하게 요청하고 확보할 수 있는 체계 구축에 기반이 되고자 한다.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.399-404
• /
• 2008

Spray pyrolysis was applied to prepare $M_{3}MgSi_{2}O_{8}:Eu^{2+}$ (M=Ca, Sr, Ba) blue phosphor powder. The library of a Ca-Sr-Ba ternary system was obtained by a combinatorial method combined with the spray pyrolysis in order to optimize the luminescent property under vacuum ultraviolet (VUV) excitation. 10 potential compositions were chosen from the first screening. The emission shifted to longer wavelength as Ca became a dominant element and the emission intensity was greatly reduced in the composition region at which Ba is dominant element. On the base of the first screening result, the second fine tuning was carried out in order to optimize the luminescence intensity under VUV excitation. The optimal composition for the highest luminescence intensity was $(Ca_{1.7},\;Sr_{0.3},\;Ba_{1.0})Si_{2}O_{8}:Eu^{2+}$ which had the color coordinate of (0.152, 0.072) and about 64% emission intensity of $BaMgAl_{10}O_{17}$ (BAM) phosphor.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.8-16
• /
• 2006

The communication through optical fiber is taking an important role of the expansion of communication network with excellent transmitting rate and quality. As the optical communication is introduced to the backbone network at first and becomes a general communication method of network, the demand of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM(Wavelength Division Multiplexing) element increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the driving mechanism of ultra precision stage is studied with the aim of optimal design of stage. The travel and the resolution of stage are investigated. The hysteresis of the stage is generated because of PZT actuator. The hysteresis and the inverse hysteresis are modeled in X, Y, and Z-axis motion. The input data of desired displacement of the stage according to input voltage is obtained from the inverse hysteresis equation. In the result of experiments with the input data, the errors due to hysteresis are well compensated.

• 센서학회지
• /
• 제29권2호
• /
• pp.118-122
• /
• 2020

This paper proposes a specific sensor-design strategy and the possibility of improving the sensing performance, which can be obtained by replacing part of the existing plasmonic sensor based on the Kretschmann configuration method with an effective refractive-index layer. By replacing the metal layer with an effective refractive-index layer composed of gold and the material to be sensed, an improvement in the detection performance, accompanied by an increase in the sensed incident angle, is observed, and the gold-composition ratio that demonstrates the best result is presented. Subsequently, an increase in the sensed incident angle generated in the previous step can be suppressed by randomly etching a portion of the prism adjacent to the metal layer in a sub-wavelength scale. Finally, this study analyzes the optimization of the metal-layer thickness in a given sensor structure. An effective refractive thin-film surface plasmon resonance sensor design that can achieve optimal sensing performance is then proposed.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.560-568
• /
• 2000

The aims of this research were to investigate the preprocessing effect of spectrum data on prediction performance and to develop a robust model to predict SSC in intact apple. Spectrum data of 320 Fuji apples were measured with the on-line transmittance measurement system at the wavelength range of 550∼1100nm. Preprocess methods adopted for the tests were Savitzky Golay, MSC, SNV, first derivative and OSC. Several combinations of those methods were applied to the raw spectrum data set to investigate the relative effect of each method on the performance of the calibration model. PLS method was used to regress the preprocessed data set and the SSCs of samples, and the cross-validation was to select the optimal number of PLS factors. Smoothing and scattering corection were essential in increasing the prediction performance of PLS regression model and the OSC contributed to reduction of the number of PLS factors. The first derivative resulted in unfavorable effect on the prediction performance. MSC and SNV showed similar effect. A robust calibration model could be developed by the preprocessing combination of Savitzky Golay smoothing, MSC and OSC, which resulted in SEP= 0.507, bias=0.032 and R$^2$=0.8823.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1219-1222
• /
• 2005

As the optical communication is introduced to the backbone network at first and becomes a general communication method of network, the demand of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM(Wavelength Division Multiplexing) element increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the driving mechanism of ultra precision stage is studied with the aim of optimal design of stage. The travel and the resolution of stage are investigated. The hysteresis of the stage is generated because of PZT actuator. The hysteresis and the inverse hysteresis are modeled in X, Y, and Z-axis motion. The input data of desired displacement to the stage according to input voltage is obtained from the inverse hysteresis equation. In the result of experiments with the input data, the errors due to hysteresis are well compensated.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1400-1402
• /
• 2003

The objective of this paper is to determine the suitable spectral bands for monitoring growth status change during a long period. The long-term ground-level reflectance spectra as well as LAI and biomass were obtained in xiaotangshan area, Beijing, 2001. The narrow-band NDVI type spectral indices by all possible two bands were calculated their correlation coefficients R$^2$ with biomass and LAI. The best NDVIs must have higher R$^2$ with both biomass and LAI. The reasonable band centers and band widths were determined by a systematically increasing bandwidth centered over a wavelength. In addition, the first 19 bands of MODIS were simulated and investigated. Each developed spectral indices was then validated by the biomass and LAI time series using the generalized vector angle. It turned out that six new NDVI type indices within 750-1400nm were developed. NDVI(811_10,957_10) and NDVI(962_10,802_10) performed best. No satisfactory conventional NDVI formed by red and NIR bands were found effective. MODIS_NDVI(band19, band17) and MODIS_NDVI(band19, band2) were much better than MODIS_NDVI(band2,band1) for growth monitoring.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1070-1077
• /
• 2011

본 논문은 초음파 가공에 의한 용착성을 가공조건의 영향에 관하여 나타내었다. 한파장 혼의 최적화를 이용한 Ni-Cu 이종금속 박판의 용착성 평가는 초음파 가공 방법을 이용하여 확인된다. 초음파 가공변수 설정에 따른 인장시험을 통한 최적의 용착조건을 제시하였으며 SEM 사진과 EDX-ray 분석에 의한 용착성을 평가하였다. 실험적 연구는 초음파 가공 후 인장강도의 측정, SEM사진 분석으로 수행된다. 또한 가공시간, 가압력, 진폭의 가공변수들은 본 연구에 적용되었다.

• 한국항행학회논문지
• /
• 제17권1호
• /
• pp.16-23
• /
• 2013

단일 모드 광섬유의 그룹 속도 분산과 비선형 효과에 의해 왜곡되는 960 Gbps 파장 분할 다중 신호의 보상을 위해 분산 제어 기술이 적용된 광전송 링크에서 분산 보상 광섬유 (DCF; dispersion compensating fiber)의 분산 계수와 중계 구간 당 잉여 분산량 (RDPS; residual dispersion per span)이 왜곡 보상에 미치는 영향을 분석하였다. 우선 왜곡 보상에 큰 영향을 미치는 최적 전체 잉여 분산량 (NRD; net residual dispersion)은 고려한 모든 DCF의 분산 계수와 RDPS에 관계없이 큰 입사 전력에서 구해야 한다는 것을 확인하였다. 중계 구간의 RDPS는 매우 작게, 반면 DCF의 분산 계수는 크게 하여야 시스템 성능이 현저하게 개선되는 것을 확인하였다.