• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.19-21
• /
• 2007

In recent, a great number of electric motor units (EMUs) have been disused in Korea according as its legal duration is 25 years. Generally, the disused EMUs are disposed by selling original form or scrapping for junk. Until now, any efficient disposal system for disused EMUs has not existed. The purpose of this study was to develop the recycling process for the FRP used as an interior panel of EMU. This process was to manufacture a product mixing binders, fillers and the powdered FRP. The characteristics of a product were changed with the mixing ratio of the powdered FRP. The optimal ratio of the powdered FRP was from 10 % to 15 % (w/w). In the future, the application of this process can enhance the efficiency of resource recycling and decrease the cost of waste treatment in the EMU industry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.98-106
• /
• 1999

In this study cold rolling process for the irregular cross-sectional shape has been investigated. The product analyzed in present study is the steel cutter, which is frequently used to cut the desired shape on leather. Because steel cutter always has a irregular cross-section, after rolling process the workpiece is severely bended to every direction. The bending of the workpiece affects the processed performed after rolling such as heat treatment and grinding, then that of the workpiece becomes more severe. In this study, therefore, to prevent the bending of the workpiece to the left and right sides. rigid-plastic finite element method has been utilized and in order to find optimal roll geometry rapidly, one dimensional equal interval search technique has been also introduced. By using both rigid plastic finite element method and optimum technique, cold rolling process for the irregular cross-sectional shape has been successfully investigated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.258-263
• /
• 2000

Under the optimal cutting conditions, determined the machinability difference of cutting tools are by two major factors. One is the geometric shape of the cutting tool, and the other is the tool materials or heat treatment or coating of the cutting tool. In this research, we evaluated the machinability of cutting tools with conventional HSS and P/M(powder metallurgy) which was made from the different of materials and manufacture processes. Tool wear, surface roughness, cutting force and squareness of machined workpiece were evaluated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.311-315
• /
• 2002

The coupled finite/boundary element method is used in numerical analysis for acoustic radiation from the vibration of rectangular composite plate which is simply supported. This analysis is validated using the Wallace equation for an isotropic plate. Active control of sound fields has been carried out using 3 pairs of piezoelectric sensor/actuator and a pair of viscoelastic material by passive constrained layer damping treatment. The results show that the optimal placement of piezoelectric sensor/actuator and VE patch is required to control the sound fields from a vibrating composite plate.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.566-568
• /
• 1998

In this paper, we suggest a optimal design method of Fuzzy-Neural Networks model for complex and nonlinear systems. FNNs have the stucture of fusion of both fuzzy inference with linguistic variables and Neural Networks. The network structure uses the simpified inference as fuzzy inference system and the BP algorithm as learning procedure. And we use a clustering algorithm to find initial parameters of membership function. The parameters such as membership functions, learning rates and momentum coefficients are easily adjusted using the genetic algorithms. Also, the performance index with weighted value is introduced to achieve a meaningful balance between approximation and generalization abilities of the model. To evaluate the performance index, we use the time series data for gas furnace and the sewage treatment process.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.267-270
• /
• 1997

In this paper, we proposed an optimazation method using Genetic Algorithm for nonlinear system modeling. Fuzzy Neural Network(FNNs) was used as basic model of nonlinear system. FNNs was fused of Fuzzy Inference which has linguistic property and Neural Network which has learning ability and high tolerence level. This paper, We used FNNs which was proposed by Yamakawa. The FNNs was composed Simple Inference and Error Back Propagation Algorithm. To obtain optimal model, parameter of membership function, learning rate and momentum coefficient of FNNs are tuned using genetic algorithm. And we used simplex algorithm additionaly to overcome limit of genetic algorithm. For the purpose of evaluation of proposed method, we applied proposed method to traffic choice process and waste water treatment process, and then obtained more precise model than other previous optimization methods and objective model.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.235-240
• /
• 2005

Recently urban utility plants in urban areas of Korea, such as energy supply systems, municipal waste incineration systems, sewage treatment systems and so on, have caused some critical troubles, for instance the insensitive response to the seasonal or daily variation of loads, the low system efficiency and inefficient use of energy because of the large-scale system located a great distance. Therefor the design method of optimal integrated system model of various urban utility plants proposed in this study suitably to the present situation of Korea. Also, the effect analysis for the introduction of compound utility plants was studied for a new town model on a 60,000 persons scale. As the results we found that the complex plant was superior to individual urban utility plant in side of the initial investment expenses, the operating cost and other reasons.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.431-432
• /
• 2012

상수도관의 노후화에 따라 빈번히 발생하는 상수관망의 용수공급 중단의 피해를 저감하고 관망내에서 발생하는 용수의 수질저하를 방지하기 위하여 용수공급 블록단위에 소규모의 수직형 정수처리 시설을 설치하는 방안이 연구되고 있다. 이와 같이 설치되는 수직형 정수처리 시설을 기존 관망내에 적절한 위치에 설치하여야 최대의 효과를 가져올 수 있다. 이를 위하여 EPANET을 활용하여 수직형 정수처리 시설을 다양한 지점에 설치한다고 가정한 후 개별 설치지점별 수리학적 안정성을 절점의 압력변동폭으로 정량화하여 최적위치를 결정할 수 있는 방법을 제안하였다. 제안된 방법을 국내 A 관망에 적용하여 적용성을 검증하였다.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2000.10a
• /
• pp.85-91
• /
• 2000

Aspergillus oryzae is a filamentous fungus classified in the group Aspergillaceae Ascomycetes. It is an important microorganism for industrial production of enzymes and fermented food productions. It secrets large quantities of proteins or enzymes into the culture medium which makes this organism appealing for the production of heterologous proteins. Recently Electric field-mediated transformation method, electroporation, has been applied to fungal transformation. In this study, fungal transformation was carried out by bypassing the protoplast isolation step, decreasing the culturing time and non-protoplast transformation for the increment of transformation efficiency. Transformants were obtained with electroporation in optimal condition 2,500 voltage, 1,540 ohm and 0.50 capacitance. More than 1,000 transform ants were obtained with 6-10 hrs cultured mycelia without enzyme treatment, called non-protoplast transformation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.29-36
• /
• 2000

This investigation has been studied about friction and wear properties which were important problem, when carbon fiber reinforced plastic(CFRP) was used practically. Unidirection carbon fiber reinforced composites was fabricated with epoxy resin matrix and carbon fiber as a reinforced, and its surface was modified by the ion-assisted reaction. And then we tested the their friction and wear properties according to the ion-irradiation. when the amount of ion-irradiation was 1${\times}$10l6$\^$16/ ions/$\textrm{cm}^2$, the friction coefficient values were about 0.1, where as, the friction coefficient values of non-treatment composites were about 0.16. The former was the stablest in wear mode. We know that ion-irradiation was not proportioned to the friction coefficient, so we found the optimal conditions of the friction and wear according to the ion-irradiation.