• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.936-941
• /
• 2004

An Optimal Feedforward Integral Variable Structure or FIVSC approach for an electrohydraulic position servo control system is presented in this paper. The FIVSC algorithm combines feedforward strategy and integral in the conventional Variable Structure Control (VSC) and calculating the control function to guarantee the existence of a sliding mode. Furthermore, the chattering in the control signal is suppressed by replacing the sign function in the control function with a smoothing function. The simulation results illustrate that the purposed approach gives a significant improvement on the tracking performances when compared with some existing control methods, like the IVSC and MIVSC strategies. Simulation results illustrate that the purposed approach can achieve a zero steady state error for ramp input and has an optimal motion with respect to a quadratic performance index. Moreover, Its can achieve accurate servo tracking in the presence of plant parameter variation and external load disturbances.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.269-275
• /
• 2008

This study was conducted to design an impedance sensor that can measure soil water content of soils. Partial least square regression (PLSR) was applied to soil impedance data preprocessed with a smoothing method. An optimal sub-spectrum size and wavelength range were determined by comparing the coefficient of determination ($R^2$) and root mean square error (RMSE) of the PLSR models obtained using soil impedance data. various PLS analysis. Based on the PLSR analysis, it would be concluded that the optimal spectrum measurement range was $32.0{\sim}50.0\;MHz$ with the optimal sub-spectrum size of about 18.5 MHz.

• 소성∙가공
• /
• 제13권1호
• /
• pp.90-101
• /
• 2004

An inverse mosaic method has been proposed to generate an initial blank shape from the final product shape. Differently from the geometric mapping method, the method can handle triangular patches. However, the generated blank shape is strongly dependent on the order of determination of nodes. In order to compensate the dependency error smoothing technique has been also developed. Although the accuracy has been improved greatly compared with the geometrical mapping method, the method has limitation, due to the no incorporation of plasticity theory. Even though the accuracy of the radius vector method is already proved. the method requires initial guess to start the method. In order to compromise the limitation of the present method and the radius vector method, the method has been connected to the radius vector method. The efficiency of the present optimal blank design method has been verified with some chosen examples.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.418-418
• /
• 2000

This paper proposes a path planning algorithm for mobile robot. To generate an optimal path and minimum time path for a mobile robot, we use the Genetic Algorithm(GA) and Visibility Graph. After finding a minimum-distance between start and goal point, the path is revised to find the minimum time path by path-smoothing algorithm. Simulation results show that the proposed algorithms are more effective.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.560-568
• /
• 2000

The aims of this research were to investigate the preprocessing effect of spectrum data on prediction performance and to develop a robust model to predict SSC in intact apple. Spectrum data of 320 Fuji apples were measured with the on-line transmittance measurement system at the wavelength range of 550∼1100nm. Preprocess methods adopted for the tests were Savitzky Golay, MSC, SNV, first derivative and OSC. Several combinations of those methods were applied to the raw spectrum data set to investigate the relative effect of each method on the performance of the calibration model. PLS method was used to regress the preprocessed data set and the SSCs of samples, and the cross-validation was to select the optimal number of PLS factors. Smoothing and scattering corection were essential in increasing the prediction performance of PLS regression model and the OSC contributed to reduction of the number of PLS factors. The first derivative resulted in unfavorable effect on the prediction performance. MSC and SNV showed similar effect. A robust calibration model could be developed by the preprocessing combination of Savitzky Golay smoothing, MSC and OSC, which resulted in SEP= 0.507, bias=0.032 and R$^2$=0.8823.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.1018-1023
• /
• 2009

본 연구는 도시철도 시스템에서 동일시간에 동력운전하는 열차수를 최소화하여 전기에너지소모의 최대치를 최소화하고자 한다. 이를 위하여 열차동력운전 분산 열차 시각표 작성에 대한 문제를 정의하였다. 정의된 문제를 혼합정수계획(Mixed Integer Programming)모형으로 정식화하고 문제의 해법으로 상용소프트웨어를 활용한 해법과 휴리스틱 해법 두 가지를 제시하였다. 실제 열차시각표에 적용하여 동시 동력운전 열차수를 25% 감소시켰으며 본 연구결과의 유용성을 확인하였다. 이를 통하여 기존 시각표의 서비스품질을 악화시키지 않는 에너지 효율적 열차시각표를 작성하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제22권5호
• /
• pp.829-837
• /
• 2011

본 논문에서는 비관측요인모형을 이용하여 한국의 국내총생산 시계열 자료를 분석한다. 이 모형이 확률적 및 결정적 요인들을 모두 포괄할 수 있다는 점을 이용하여, 보다 다양한 형태로 시계열 자료의 모형화를 시도하였으며, 지수평활법 및 박스-젠킨스의 ARIMA모형과 예측력을 비교하였다. 국내 총생산 자료에 대한 2년간의 미래 예측에서 비관측요인모형이 보다 우수함을 보인다.

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.149-157
• /
• 2004

Implicit finite element analysis of the flat surface-straight edge hemming process is performed by using a commercial code ABAQUS/Standard. Methods of finite element modeling for springback simulation and contact pair definition are discussed. An optimal mesh system is chosen through the error analysis that is based on the smoothing of discontinuity in the state variables. This study has focused on the investigation of the influence of process parameters in flanging, pre-hemming and main hemming on final hem quality, which can be defined by turn-down, warp and roll-in. The parameters adopted in this parametric study are flange length, flange angle, flanging die corner radius, face angle and insertion angle of pre-hemming punch, and over-stroke of pre-hemming and main hemming punches.

• 한국항해항만학회지
• /
• 제40권5호
• /
• pp.241-247
• /
• 2016

The tracking filter plays a key role in the accurate estimation and prediction of maneuvering a vessel's position and velocity when attempting to enhance safety by avoiding collision. Therefore, in order to achieve accurate estimation and prediction, many oceangoing vessels are equipped with the Automatic Radar Plotting Aid (ARPA) system. However, the accuracy of prediction depends on the tracking filter's ability to reduce noise and maintain a stable transient response. The purpose of this paper is to derive the optimal values of the gain parameters used in tracking a High Dynamic Warship. The algorithm employs a ${\alpha}-{\beta}-{\gamma}$ filter to provide accurate estimates and updates of the state variables, that is, positions, velocity and acceleration of the high dynamic warship based on previously observed values. In this study, the filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from set values of the damping parameter, ${\xi}$. Optimization of the damping parameter, ${\xi}$, is achieved experimentally by plotting the residual error against different values of the damping parameter to determine the least value of the damping parameter that results in the optimum smoothing coefficients leading to a reduction in the noise corruption effect. Further investigation of the performance of the filter indicates that optimal smoothing coefficients depend on the initial and average velocity of the target.

• 품질경영학회지
• /
• 제12권2호
• /
• pp.25-32
• /
• 1984

The purpose of this paper is to compare several forecasting methods for the case of the cement product by the analysis of the forecasting data and by the study of major forecasting methods, which are the Trend Projection, Exponential Smoothing, and Multiple Regression Analysis. As a result, it is thought that the Multiple Regression Analysis is the optimal model for the case of the cement product. In addition, it is important to consider the future circumstances for forecasting, and to improve the level of the forecasting results through the precise analysis of the collected data.