• 한국수산과학회지
• /
• 제54권6호
• /
• pp.869-879
• /
• 2021

Methods for the development of home meal replacement seafood tailored to consumer needs for the advanced use of Broughton's ribbed ark Scapharca broughtonii (BRA) in Korea are required. In this study, we developed a cheese-topped, semi-dried, and seasoned Broughton's ribbed ark (S-BRA) tailored for the younger generation with an improved texture and fish odor. The optimization of conditions to improve the texture and fish odor was performed using RSM. The design of the model was appropriate because there was no significant difference (P>0.05) between the predicted and actual values of moisture content, hardness, and overall acceptance, and the optimal preparation conditions were a vinegar content of 2.68%, a soaking time of 62 min, a drying temperature of 60℃, and a time of 162 min. The S-BRA manufactured under these optimal conditions exhibited a lower odor intensity compared to the unsoaked and undried control, suggesting that the fish odor of S-BRA has been improved. The moisture content related to the texture of the S-BRA was lower than that of the control, and the hardness was higher. Therefore, the S-BRA developed in this study will appeal to people of all ages, especially the younger generation; their consumption is expected to increase.

• Advances in concrete construction
• /
• 제10권4호
• /
• pp.301-310
• /
• 2020

The following paper concentrates on the objective of studying the influences of extent of duration and temperature on the Pozzolanic properties as well as reactivity of locally existing natural clay of Nai Gaj, district Dadu, Sindh Pakistan. The activation of the clay only occurs through heating when temperature in a furnace chamber reaches 600, 700 and 800oC for 1, 2 and 3 hours and at 900 and 1000℃ for 1 and 2 hours. Furthermore, the strength activity index (SAI) of advanced pozzolanic material happens to be identified through 20% cement replacement for different samples of calcined clay as per ASTM C-618. The compressive strength test of samples had been operated for 7 and 28-days curing afterwards. The maximum compressive strength had been seen in mix E in which cement was replaced with clay calcined at 700℃ for 1 hour that is 27.05 MPa that is 24.31% more than that of control mix. The results gathered from the SAI verdicts the optimal activation temperature is 700℃ within a one-hour time period. The SAI at a temperature of 700℃ with a one-hour duration at 28 days is 124.31% which happens to satisfy the requirements of the new Pozzolanic material, in order to be applied in mortar/concrete (i.e., 75%). The Energy- dispersive spectrometry (EDS) along with the X-ray diffraction (XRD) have been carried out in means of verifying whether there is silica content or amorphous silica present in metakaolin that has been developed. The findings gathered from the SAI were validated, as the analysis of XRD verified that there is in fact Pozzolanic activity of developed metakaolin. Additionally, based on observation, the activated metakaolin holds a significant influence on the increase in mortar's compressive strength.

• Journal of Chest Surgery
• /
• 제37권6호
• /
• pp.492-498
• /
• 2004

목적: 저자들은 본 연구에서 제I형 심실중격결손 환자에서 대동맥판막 병변 발생의 위험인자와 수술후 대동맥판막병변의 진행 양상과 수술 결과를 분석하여 제I형 심실중격결손의 수술시기와 치료전략을 확립하고자 하였다. 대상 및 방법 1991년 1월부터 2000년 12월까지 제I형 심실중격결손 또는 이에 동반된 대동맥판막병변에 대한 수술을 시행한 310예의 환자군을 대상으로 하였다. 환자의 평균연령은 73.7$\pm$114.7 (1∼737)개월이었으며 평균체중은 20.5$\pm$18.8 (3∼95) kg이었다. 진단 당시 대동맥 병변이 없는 경우가 186예(60%)였고 경도의 대동맥판폐쇄부전이 동반된 경우가 83예(27%), 중등도의 대동맥판폐쇄부전이 동반된 경우가 25예(8%), 중증 대동맥판폐쇄부전이 동반된 경우가 16예(5%)였다. 295예의 환자는 일차수술에서 동맥하심실중격결손만을 폐쇄하거나 (279예) 동시에 대동맥판막성 형술을 시행하거나 (5예), 대동맥판막치환술을 시행하였다(11예). 15예의 환자는 일차로 심실중격결손에 대해 수술을 받았던 환자 중 이차로 대동맥판막성형술을 시행하거나(4예), 대동맥판막치환술을 시행하였다(11예). 대동맥판폐쇄부전의 발생에 영향을 주는 위험인자를 분석하기 위하여 수술 당시 환자의 나이, 대동맥판막탈출증의 동반 여부, Qp/Qs, 수축기폐동맥압, 심실중격결손의 크기, 수축기 폐동맥압/체동맥압비 등을 분석대상 위험인자로 포함시켰다. 수술 당시 나이가 대동맥판폐쇄부전 발생에 미치는 영향을 보기 위해 환자군을 0∼1세(Group A: 102예), 1∼6 세(Group B: 136예), 6∼20세(Group C: 31예)로 나누었다. 대동맥판막의 수술방법에 따른 만기 수술 성적의 비교를 위해 대동맥판막성형술을 시행받은 9예와 대동맥판막치환술을 시행받은 22예의 술후 대동맥판막 기능을 비교하였다. 결과: 제I형 심실중격결손 환자에서 수술 당시 고연령, 대동맥판막탈출증 동반, 높은 Qp/Qs, 수축 기고폐동맥압 등이 대동맥판폐쇄부전 발생의 위험인자로 밝혀졌다(p<0.05, Table 2). 특히 수술 당시 연령이 높을수록 술 전 대동맥판폐쇄부전의 빈도가 높았으며 술 후 대동맥판폐쇄부전이 새로 발생하거나 진행하는 빈도가 높았다(p<0.05, Table 1, Fig. 1). 수술 당시 연령이 높은 환자에 대하여 판막대치술이 아닌 판막성형술을 한 경우 잔존 대동맥판폐쇄부전이 남는 경우가 의미있게 높았다 (p<0.05, Fig. 2). 결론: 결론적으로 대동맥판막의 병변 진행이나 발생을 억제하기 위하여 제I형 심실중격결손증에 대해서는 조기 수술이 권장되며 조기수술이 안 되어 병변의 진행이 심해지면 대동맥판막성형술의 완벽한 결과를 기대하기 어려운 경우가 적지 않으므로 병변이 심한 경우 대동맥판막대치술도 수술방법의 선택목록에 포함시켜야 한다.

• 한국수정란이식학회지
• /
• 제30권4호
• /
• pp.265-270
• /
• 2015

Growth rate during rearing, which varies depending on provided nutrition, has been related with age at $1^{st}$ calving (AFC). This study investigated the effect of upgrowth parameters during the rearing period on the reproduction of nulliparous Holstein heifers. The study comprised 77 successively born heifers from the same herd. Growth rate and fertility traits were measured during rearing and fertility parameters were recorded in lactations 1. Growth parameters (body weight, height, heart girth and body length) were measured at the approximate birth time, 270 and 450 d of age. Reproduction data collected included age at $1^{st}$ breeding, number of services per conception (S/C), pregnancy rate to $1^{st}$ artificial insemination, AFC. Animals were subsequently divided into 4 AFC groups for analysis: <23 mo, 23~25 mo, 26~30 mo and >30 mo. The AFC reflected both upgrowth rate and heifer reproduction, with later calving heifers smaller. Increased skeletal growth (at 270 and 450 d) was related with a reduced AFC (p<0.05). Early calving animals (<23 mo) had the best reproduction as nulliparous heifers, with most conceiving at first service (87.5%). Fertility in the first lactation was the worst in the oldest AFC group (>30 mo). In the 1st lactation period, a number of services per conception ($3.1{\pm}0.3$) increased with increasing AFC (>30 mo). Sub-optimal upgrowth related with an increased AFC could be mitigated by improved monitoring of replacement heifers during the rearing period.

• Fisheries and Aquatic Sciences
• /
• 제10권3호
• /
• pp.103-112
• /
• 2007

High prices, overfishing, and contamination have limited the availability of natural caviar as a food product. We attempted to apply encapsulation by calcium-alginate gel membranes to caviar analog preparation in an effort to produce a high-quality replacement for natural caviar. Physical conditions of stirring speed $(X_1,\;rpm)$ and gelation time $(X_2,\;min)$ as the independent variables for gelation were optimized by response surface methodology. Sphericity $(Y_1,\;%)$, diameter $(Y_2,\;mm)$, membrane thickness $(Y_3,\;mm)$, rupture strength $(Y_4,\;g)$, and rupturing deformation $(Y_5,\;mm)$ were used as the dependent variables to compare characteristics of the capsules for caviar analogs with natural caviar. The values of the independent variables as evaluated by multiple response optimization were $X_1=-0.1271 (278 rpm) and $X_2=0.4436$ (12.2 min), respectively. Predicted values of the four dependent variables were $Y_1=97.7%,\;Y_2=2.97mm,\;Y_4=1,465g,\;and\;Y_5=1.15mm$. Membrane thickness $(Y_3)$ was eliminated from the dependent variables for multiple response optimization because it could not be measured with an image analyzer. The experimental values prepared under the optimal conditions for verification nearly coincided with the predicted values and satisfied the conditions of natural caviar.

• Journal of Microbiology and Biotechnology
• /
• 제22권1호
• /
• pp.107-113
• /
• 2012

To develop a practical and cost-effective medium for bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, we investigated the feasibility and performance of bioethanol production in CSL (corn-steep liquor)-containing medium, where yeast Pichia stipitis was used and the repeated batch was carried out in a surface-aerated fermentor. The optimal medium replacement time during the repeated operation was determined to be 36 h, and the surface aeration rates were 30 and 100 ml/min. Under these conditions, the repeated-batch operation was successfully carried out for 6 runs (216 h), in which the maximum bioethanol concentrations reached about 11-12 g/l at each batch operation. These results demonstrated that bioethanol production could be carried out repeatedly and steadily for 216 h. In these experiments, the total cumulative bioethanol production was 57.9 g and 58.0 g when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. In addition, the bioethanol yields were 0.43 (about 84% of theoretical value) and 0.44 (about 86% of theoretical value) when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. CSL was successfully used as a medium ingredient for the bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, indicating that this medium may be practical and cost-effective for bioethanol production.

• 한국지진공학회논문집
• /
• 제24권5호
• /
• pp.211-217
• /
• 2020

Earthquake preparedness has become more important with recent increase in the number of earthquakes in Korea, but many existing structures are not prepared for earthquakes. There are various types of liquefaction prevention method that can be applied, such as compaction, replacement, dewatering, and inhibition of shear strain. However, most of the liquefaction prevention methods are applied before construction, and it is important to find optimal methods that can be applied to existing structures and that have few effects on the environment, such as noise, vibration, and changes in underground water level. The purpose of this study is to estimate the correlation between the displacement of a structure and variations of pore water pressure on the ground in accordance with the depth of the sheet file when liquidation occurs. To achieve this, a shaking table test was performed for Joo-Mun-Jin standard sand and an earth pressure, accelerometer, pore water pressure transducer, and LVDT were installed in both the non-liquefiable layer and the liquefiable layer to measure the subsidence and excess pore water pressure in accordance with the time of each embedded depth. Then the results were analyzed. A comparison of the pore water pressure in accordance with Hsp/Hsl was shown to prevent lateral water flow at 1, 0.85 and confirmed that the pore water pressure increased. In addition, the relationship between Hsp/Hsl and subsidence was expressed as a trend line to calculate the expected settlement rate formula for the embedded depth ratio.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.16-25
• /
• 2018

콘크리트는 장기수명이 요구되는 구조물에 적합한 건설재료로 내구성이 우수하지만 장기간 지하수에 노출되어 발생하는 칼슘용출 현상에 대한 이해 및 이에 따른 RC 부재의 휨 거동 특성을 평가할 필요가 있다. 실험결과에 따르면, 광물질 혼화재는 RC 부재의 장기강도 개선에 효과적이지만, 칼슘용출이 발생하면 RC 부재의 항복하중 및 휨 강성이 감소하고 중립축깊이와 처짐량이 증가하는 것으로 나타났다. 따라서 칼슘용출에 의한 열화는 RC 부재의 성능 저하를 유발하므로 칼슘용출 환경에 노출되는 지하구조물에 광물질 혼화재가 적용될 경우에는, 광물질 혼화재 종류에 따른 최적 혼입 비율이 마련되어야할 것으로 사료된다.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.271-279
• /
• 2016

본 연구의 목적은 고강도 콘크리트에 광물성 혼화재로서 동제련 슬래그를 혼입하였을 때 유동특성을 파악하기 위한 것이다. 이를 위해 동제련 슬래그를 고강도 콘크리트의 결합재로 사용하여 10 %, 20 %, 30 %, 40 %, 50 %를 시멘트로 대체하여 사용하였다. 그리고 굳지않은 콘크리트에서 슬럼프플로, 500mm도달시간, V-Funnel과 U-Boxt시험을 실시하여 유동성 및 충전성을 알아보았고, 굳은 콘크리트에서는 재령 3, 7, 14, 28일의 콘크리트 압축강도를 측정하였다. 상기의 실험결과, 동제련 슬래그를 광물설 혼화재료로 혼입한 콘크리트의 굳지 않은 콘크리트 특성을 살펴보면 동제련 슬래그의 치환율이 30%까지는 유동성이 증가하였으며, 충전성이 우수한 것을 알 수 있었다. 그리고 굳은 콘크리트의 특성을 살펴보면 동제련 슬래그의 치환율이 30 %일때까지 모든 재령에서 압축강도가 증가하는 것을 확인할 수 있었다. 그러나 동제련 슬래그의 치환율이 30%를 초과하였을 때는 유동성, 충전성 및 압축강도가 감소하는 것을 확인할 수 있어 동제련 슬래그의 최적 치환율은 30 %이내가 적정할 것으로 판단된다.

• 한국축산식품학회지
• /
• 제43권3호
• /
• pp.428-440
• /
• 2023

Global meat consumption is increasing worldwide, however, supply remains lacking. Several alternative protein sources, such as cultured meat, plant-based protein production, and edible insects, have been proposed to overcome this shortage. Interestingly, edible insects are characterized by superior digestive and absorptive qualities that make them the ideal replacement for traditional protein production. This study aims to further the processing ability of insect protein by investigating the effects of various pre-treatment methods, such as blanching (HB), roasting (HR), and superheated steam (HS), on the nutritional properties and physicochemical characteristics of proteins extracted from Hermetia illucens larvae. The drying rate, pH value, color analysis, amino and fatty acid profile, as well as bulk density, shear force, and rehydration ratios of the above pre-treatment methods, were explored. HS was found to have the highest drying rate and pH value analysis showed that HB and HS samples have significantly higher values compared to the other modalities. Raw edible insects had the highest value in the sum of essential amino acid (EAA) and EAA index when compared to EAAs. HB and HS showed significantly lower bulk density results, and HS showed the highest shear force and the highest value in rehydration ratio, regardless of immersion time. Therefore, taking the above results together, it was found that blanching and superheated steam blanching pre-treatment were the most effective methods to improve the processing properties of H. illucens after hot-air drying.