• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.1100-1105
• /
• 2000

현대의 레이더 펄스 압축기술로 가장 널리 사용되고 있는 방식은 바커코드를 사용하여 matched filter로 레이더 신호를 처리하는 상관처리(correlation processing)이다. 그러나 이 방식의 경우 탐지 감도를 높여 주는 장점이 있지만, 환경에 따라서 range-sidelobe가 발생하여 레이더의 성능을 낮추게 된다. 본 논문에서는 상관처리방식에 추가적인 처리로 sidelobe를 제거하는 최적처리 방법을 제안하고 Doppler shift가 존재할 때의 성능을 평가한다. 그리고 제안된 알고리즘 환경에서 최적의 이진 코드를 개발하고 이를 Barker 코드를 사용한 전통적인 상관처리방식의 경우와 비교.분석한다. 도플러 변이가 존재할 때, 최적 코드를 사용하여 최적 처리하는 방식이 바커코드를 사용한 전통적인 처리방법보다 레이더의 성능을 향상시킴을 보여줄 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.358-358
• /
• 2000

An iterative learning control technique based on a linear quadratic optimal criterion is proposed for temperature uniformity control of a silicon wafer in rapid thermal processing.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권7호
• /
• pp.465-472
• /
• 2004

Analog CPPN-based optimal road boundary detection algorithm for autonomous vehicle is proposed. The CPPN is a massively connected analog parallel array processor. In the paper, the dynamic programming which is an efficient algorithm to find the optimal path is implemented with the CPPN algorithm. If the image of road-boundary information is utilized as an inter-cell distance, and goals and start lines are positioned at the top and the bottom of the image, respectively, the optimal path finding algorithm can be exploited for optimal road boundary detection. By virtue of the parallel and analog processing of the CPPN and the optimal solution of the dynamic programming, the proposed road boundary detection algorithm is expected to have very high speed and robust processing if it is implemented into circuits. The proposed road boundary algorithm is described and simulation results are reported.

• 한국경영과학회지
• /
• 제41권1호
• /
• pp.87-98
• /
• 2016

A single machine scheduling problem for jobs with stochastic processing time is considered in this study. Shortest processing time (SPT) sequencing according to the expected processing times of jobs is optimal for schedules with minimal expected mean flow time when all the jobs arrive to be scheduled and their expected processing times are known. However, SPT sequencing according to the expected processing time may not be optimal for the minimization of the mean flow time when the actual processing times of jobs are known. This study evaluates the complexity of SPT sequencing through a comparison of the mean flow times of schedules based on the expected processing times and actual processing times of randomly generated jobs. Evaluation results show that SPT sequencing according to the expected flow time exhibits chaotic variation to the optimal mean flow time. The relative deviation from the optimal mean flow time increases as the number of jobs, processing time, or coefficient of variation increases.

• 산업공학
• /
• 제9권1호
• /
• pp.13-24
• /
• 1996

Quality of injection molded parts is dependent on both mold design and processing conditions. From the mold design point of view, an optimal shrinkage should be used to compensate the shrinkage of molded parts. From the processing point of view, it is important to analyze the priority of processing conditions because a number processing conditions affect the quality of molded parts. Processing analysis employing the design of experiment was performed, and the shrinkage of molded part was considered as a characteristic parameter to improve the quality. As the result of the analysis of variance on SN ratio of a characteristic value, injection speed and bolding pressure were selected as two effective process parameters. Regression analysis on shrinkage and processing conditions was carried out, and an optimal processing condition was obtained by the response surface analysis. Shrinkage at the optimal condition could be used to reduce the number of try-cut at the step of mold making. The ranges of indirect control parameter, such as maximum cavity pressure or weight, measured at the optimal processing condition were used for monitoring the quality of molded parts in process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.737-740
• /
• 1999

This paper deals with a real time optimization algorithm within real time for DRGS(Dynamic Route Guidance System) and evaluate the algorithm. A pre-developed system offers the optimal route in using only static traffic information. In using real-time traffic information, Dynamic route guidance algorithm is needed. The serious problem in implementing it is processing time increase as nodes increase and then the real time processing is impossible. Thus, in this paper we propose the optimal route algorithm with window mechanism for the real-time processing and then evaluate the algorithms.

• 한국정보처리학회논문지
• /
• 제4권9호
• /
• pp.2173-2184
• /
• 1997

공간 데이타베이스 시스템에서 취급되는 여러 유형의 공간질의들 중 주어진 위치에서 가장 가까운 공간객체를 찾는 최근접질의는 매우 빈번히 발생한다. 최근접질의 성능을 높이기 위해서는 색인에서 검색되는 노드의 수를 최소화할 수 있어야 한다. 기존의 방법은 이차원 검색공간에서 최근접질의의 처리만을 고려하였으며, 검색되는 노드의 수를 정확히 줄이지 못하였다. 본 논문에서는 최적탐색거리를 제안하고 그 특성을 정리하였었다. 제안된 최적탐색거리는 최근접질의 처리시 검색될 노드들을 정확히 선정하기 위한 새로운 검색거리 측도이다. 우리는 최적탐색거리를 R-트리에 적용한 최근접질의 처리 알고리즘을 제안하고 기존의 방법에 비해 질의처리의 결과가 더 정확함을 증명하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.13-18
• /
• 2006

The purpose of this paper is to identify optimal designs of server port connections between two server system for 200-300 user group. Given 3 empirical models as user and port parallel server types under some conditions of 100 Mbps and optimal CPU temperature suggested by Lee and Kim(2005), our results are shown; port parallel model was optimal when traffic processing times measured, and 250 traffics was jumping point as a critical point in our cases.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1159-1164
• /
• 2004

There is an Overhead Hoist Transport(OHT) for delivering the wafer in semiconductor processing. The transfer system is consists of carrier vehicle. rail, and support. OHTCMS(OHT Control and Management System) has to take the feature, such as the optimal control and integration with several OHT. In this paper, ESRA(Efficiency of Shortest - Route Algorithms) is proposed which can be transported optimal route and be prevented collision using the Floyd-Warshall algorithms. The proposed algorithm is verified through consecutive simulation for a long time.

• 한국수산과학회지
• /
• 제48권1호
• /
• pp.36-43
• /
• 2015

We examined sensory characteristics to determine the optimal conditions for flounder Verasper moseri Jordan et Gilbert sikhe preparation, using response surface methodology. Our aim was to develop the optimum mixing rates and materials for producing highly palatable flounder sikhe. The optimal fermentation temperature, salt concentration, and fermentation period for preparing flounder sikhe of acceptable quality were $11.63^{\circ}C$, 4.66% and 9.12 days, respectively. The optimal percentages of red pepper powder, garlic, monosodium glutamate, ginger, radish and foxtail millet were 16.08%, 7.21%, 2.96%, 3.70%, 10.12% and 13.72% respectively.