Declining research competitiveness and inefficiency are constantly being raised in the National Assembly and the media for the Government-funded Research Institutes(GFRIs), which are highly dependent on government funding. These external stakeholders point to the workforce aging of the GFRIs as one of the main causes of inefficiency. They insist that the aging leads to an increase in labor costs, a discontinuity in research, a decrease in employment of new researchers, and a decrease in research competitiveness. However, the GFRIs argue that the aging is a natural phenomenon due to an increase in the age of recruitment, and even if there is an side effect, it is extremely small or even vice versa. It is interesting that there is no empirical study identifying the correlation between the workforce aging and the research performance of the GFRIs, despite the discussion. This study tracked and analyzed the changes of the research performance and the workforce for the five years from 2011 to 2015, and tried to demonstrate the correlation between the workforce aging and the research performance. As a result, we confirmed that there is an inverted U-type correlation between the aging and the papers, one of the research performance, and that the optimal age is 44.96 years. Also, we could not find any correlation between the aging and the patents.
${\beta}-Lactamase$, secreted from Bacillus sp. J105 strain was purified to a single band on SDS-PAGE by ammonium sulfate precipitation, ion exchange column chromatography and gel-filtration. The molecular weight of the purified enzyme was 31 kDa on SDS-PAGE and its isoelectric point was 7.35. Optimal pH and temperature for enzymatic reaction were 5 and $40^{\circ}C$, respectively. As a result of total amino acid composition analysis of the purified enzyme, Gly and Ala were occupied 14.1 and 13.3 mole %, respectively. Km and Vmax value of purified enzyme were 1.33 mM and 0.36 mM/ml using ampicillin as a substrate, respectively.
Purpose: Zygomaticomaxillary complex (ZMC) fracture is one of the most common facial injuries after facial trauma. As ZMC composes major facial buttress, it is a key element of the facial contour. So, when we treat these fractures, the operator should have a concern with the symmetry to restore normal appearance and function. But sometimes, unfavorable results may occur. The aim of this study is to analyze the unsatisfied midfacial contour after ZMC fractures reduction retrospectively and to point out the notandum. Methods: 369 patients, treated for fractures of the ZMC were included in the study. After the operation, such as open reduction and internal fixation (ORIF with titanium or absorbable materials), open reduction, and closed reduction, midfacial contour was evaluated with plain films and 3-dimensional computed tomography. And unfavorable asymmetric midfacial contours were correcterd by secondary correction and re-evaluated. Gross photographs were obtained at outpatient clinic. Results: Total of 38 patients had got a facial asymmetry and among of them 24 patients were treated secondary revisional ORIF operations for correction of unfavorable result of after primary reduction. Two of them had received tertiary operations, three patients had got osteotomy more than after one year and six patients had got minor procedures. The etiology of asymmetry were lateral displaced simple fracture of arch (n=2), lateral displaced comminuted fracture of arch (n=6), comminuted arch fracture combined posterior root fracture (n=9), and communited arch and body fracture (n=12), severely contused soft tissue (n=9). After the manipulations outcomes were acceptable. Conclusion: To prevent the asymmetry in ZMC fracture reduction, complete analysis of fracture, choice of appropriate operation technique, consider soft tissue, and secure of zygoma position are important. Especially, we should be more careful about communited fracture of zygomatic body and lateral displacement, root fracture of zygomatic arch. Because they are commom causes that make facial asymmetry. To get optimal result, ensure the definite bony reduction.
Kim, Tae-Ho;Park, Je-Jin;Lee, Ki-Young;Park, Yong-Duk
International Journal of Highway Engineering
/
v.11
no.3
/
pp.13-21
/
2009
The traveler's travel pattern has significantly changed due to the social and economic changes. The travel time among the traveler's pattern is the limited resource. The travelers are trying to maximize the utility of travel with the least travel cost. So, the travelers travel with their own travel time budget in mind, which they can pay or choose to pay for the optimal maximization of the utility of the individuals. This research is to group and extract the specific factors which affect the travel time budget by utilizing the CART analysis method, which enables the analysis of traveler's characteristics and their interrelationship based on the data collected from "2002 Household Travel Practice Research" and then try to derive a model for estimating the traveler’s travel time budget. The result of CART analysis shows that the factors which affect the travel time budget include the traveler's age, size of house, type of house, type of employment, job and relation to the head of household. Considering the affecting factors derived, I developed an estimation model. From that model, we found that the age, size of house and type of house were positively (+) related to the travel time budget while the homeworking people who have less travel frequency as a type of employment were negatively (-) related to it. In particular, from the point of type of job, the housewives, children not yet old enough to attend schools and people who are working in the agricultural, or marine product industries were found to have the negative (-) value while the people who have the administrative, office, management jobs were found to have the positive (+) value.
A dynamic traffic assignment (DTA) has recently been implemented in many practical projects. The core of dynamic model is the inclusion of time scale. If excluding the time dimension from a DTA model, the framework of a DTA model is similar to that of static model. Similar to static model, with given exogenous travel demand, a DTA model loads vehicles on the network and finds an optimal solution satisfying a pre-defined route choice rule. In most DTA models, the departure pattern of given travel demand is predefined and assumed as a fixed pattern, although the departure pattern of driver is changeable depending on a network traffic condition. Especially, for morning peak commute where most drivers have their preferred arrival time, the departure time, therefore, should be modeled as an endogenous variable. In this paper, the authors point out some shortcomings of current DTA model and propose an alternative approach which could overcome the shortcomings of current DTA model. The authors substitute a traditional definition for time-dependent OD table by a new definition in which the time-dependent OD table is defined as arrival time-based one. In addition, the authors develop a new DTA model which is capable of finding an equilibrium departure pattern without the use of schedule delay functions. Three types of objective function for a new DTA framework are proposed, and the solution algorithms for the three objective functions are also explained.
In vitro culture of Toxoplasma gondii in HL-60 cells and cell-mediates immunity against Toxoplasma in dimethylsulfoxide(DMSO) -induced HL-60 cells, i.e., differentiation into granulocytes, were pursued. HL-60 calls were treated with various concentrations of DMSO, and 1.3%(v/v) for 3 day incubation was chosen as the optimal condition icy differentiation into granulocytes. The degree of differentiation was assayed in physiological and functional aspects in addition to morphological point. When treated with 1.3% DMSO for 3 days, HL-60 cells did not synthesiar DNA materials beyond background level, and showed active chemotactic response to chemotactic peptide, formal-methionyl-leucyl-phenylalanine(FMLP). Morphologically promyelocytes of high nuclearlcytoplasmic(NIC) ratio changed to granulocytes of relatively low WJC ratio. The relationships between HL-60 cells or DMSO-induced HL-60 cells and Toxoplasma were examined after stain with Giemsa and Buorescent dye (acridine orange). HL-60 cells did not show any sign of torso- plasmacidal activity but showed intracellular proliferation of Texoplasma to form rosette for 72 hr co-culture. In contrast, OMSO-induced HL-60 cells phagocytosed Toxoplasma within 1 hr, and performed a process of intracellular digestion of Toxoplasma thereafter. With the above results, it is suggested that phagosome-Iysosome fusion is one of the critical events for the parasitism by Toxoplasma or for susceptibility of host cells. The in vitro culture system of this study has offered a defined condition to study the protozoan parasite-host cell interactions.
Constructed wetlands are widely applied in urban and rural areas for various purposes such as pollutants reduction, acquisition of eco-spaces and habitats, flooding reduction, acquisition of water resources and environmental education. Since the design of constructed wetlands utilizes ecosystems, special consideration must be given to ecological mechanisms, environmental mechanisms and hydrological mechanisms. To ensure the sustainable functionality of constructed wetlands, it is necessary to achieve stable flow rate and velocity, and remove sediments to ensure sufficient space for detention. To enhance the efficiency of constructed wetland sedimentation basins, this study determined the optimal position for baffle installation, and applied Computational Fluid Dynamics (CFD) to the cross-sectional design of wetlands. CFD analysis revealed that the decrease in flow velocity with baffle installation enhanced the efficiency of sedimentation of particulate matters. Vertical baffles had higher sedimentation efficiency than those with an inclined angle. When vertical baffles were installed in the sedimentation basin of a hybrid constructed wetland to reduce non-point source pollutants in urban areas, the average flow velocity within the basin decreased by 10~30%, while the sedimentation efficiency improved by 1.3~1.5 times. The application of CFD to constructed wetlands is expected to improve the cost efficiency of designing hybrid constructed wetlands with high removal efficiency.
Microwave energy was applied to the extraction of functional catechins from grape seed. The solvent, absolute ethanol, reached the boiling point when exposed for less than 3 min microwave treatment at 100 W. The effects of independent variables in microwave-assisted extraction (MAE), including microwave power (0-160W, $X_1$), ethanol concentration (0-100%, $X_2$) and extraction time (1-5 min, $X_3$), were investigated on each response variable ($Y_n$), and the contents of catechin and its derivatives were determined via response surface methodology, thereby allowing us to predict their optimal extraction conditions. The predicted maximal values of (+)-catechin, procyanidin $B_2$, (-)-epicatechin, and (-)-epicatechin gallate were 137.99, 72.78, 222.38, and 9.59 mg%, respectively, under different MAE conditions. The predicted extraction conditions for maximum catechin responses were as follows: 104.10 W of microwave power, 45.35% of EtOH, and 4.89 min of extraction time for (+)-catechin (137.99 mg%), 133.16 W, 46.16% and 4.49 min for procyanidin $B_2$ (72.78 mg%), 136.00 W, 41.37% and 4.39 min for (-)-epicatechin (222.38 mg%), 143.20 W, 37.51% and 1.88 min for (-)-epicatechin gallate (9.59 mg%), respectively. The contents of (+)-catechin, procyanidin 1B2 and (-)-epicatechin in MAE were similarly influenced by three independent variables, whereas (-)-epicatechin gallate was influenced less profoundly by ethanol concentration and extraction time.
The purpose of this study was to determine the optimal mixing conditions for two different amounts of added mulberry powder and fresh cream to prepare functional chocolate with added mulberry powder. The experiment was designed according to the central composite response surface design, which showed 10 experimental points, and included two replicates for mulberry powder and fresh cream. The physiochemical, mechanical, and sensory properties of the test were measured, and these values were applied to the mathematical models. The results of the physiochemical and mechanical analyses of each sample, including pH, moisture content, total phenolic content, DPPH free radical scavenging activity, color L, color b, hardness, gumminess, and cohesiveness showed significant differences. The sensory characteristics of the samples tested were significantly different in flavor, texture, sourness, bitterness, and overall acceptability. The optimum formulation calculated by numerical and graphical methods was 25.76 g mulberry powder and 72.21 g fresh cream.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.4
/
pp.92-99
/
2016
A wind turbine is controlled for the purpose of obtaining the maximum power below its rated wind speed. Among the methods of obtaining the maximum power, TSR (Tip Speed Ratio) optimal control and P&O (Perturbation and Observation) control are widely used. The P&O control algorithm using the turbine power and rotational speed is simple, but its slow response is a weak point. Whereas TSR control's response is fast, it requires the precise wind speed. A method of measuring or estimating the wind speed is used to obtain a precise value. However, estimation methods are mostly used, because it is difficult to avoid the blade interference when measuring the wind speed near the blades. Neural networks and various numerical methods have been applied for estimating the wind speed, because it involves an inverse problem. However, estimating the wind speed is still a difficult problem, even with these methods. In this paper, a new method is introduced to estimate the wind speed in the wind-power graph by using the turbine power and rotational speed. Matlab/Simulink is used to confirm that the proposed method can estimate the wind speed properly to obtain the maximum power.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.