• Journal of Trauma and Injury
• /
• v.35 no.3
• /
• pp.215-218
• /
• 2022

The rectum is the least frequently injured organ in trauma, with an incidence of about 1% to 3% in trauma cases involving civilians. Most rectal injuries are caused by gunshot wounds, blunt force trauma, and stab wounds. A 46-year-old male patient was crushed between two vehicles while he was working. He was hemodynamically unstable, and the Focused Assessment with Sonography for Trauma showed hemoperitoneum and hemoretroperitoneum; therefore, damage control surgery with pelvic packing was performed. A subsequent whole-body computed tomography scan showed a displaced pelvic bone and sacrum fracture. There was evidence of an anorectal full-thickness laceration and urethral laceration. In second-look surgery performed 48 hours later, the pelvis was stabilized with external fixators, and it was decided to proceed with loop sigmoid colostomy. A tractioned rectal probe with an internal balloon was positioned in order to approach the flaps of the rectal wall laceration. On postoperative day 13, a radiological examination with endoluminal contrast injected from the stoma after removal of the balloon was performed and showed no evidence of extraluminal leak. Rectosigmoidoscopy, rectal manometry, anal sphincter electromyography, and trans-stomic transit examinations showed normal findings, indicating that it was appropriate to proceed with the closure of the colostomy. The postoperative course was uneventful. The optimal management for extraperitoneal penetrating rectal injuries continues to evolve. Primary repair with fecal diversion is the mainstay of treatment, and a conservative approach to rectal lacerations with an internal balloon in a rectal probe could provide a possibility for healing with a lower risk of complications.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.116-121
• /
• 2012

Cordyceps and its allies fungi has been described as a secret medicine that gives eternal youth and a long life. Some species of Cordyceps are sources of biochemicals, such ascordycepin, with interesting biological and pharmacological properties. Hence, it has been studied to uncover its pharmacological effect. We attempted to study the formation of fruiting bodies and to develop means of mass production Korean isolate of Paecilomyces tenuipes has been inoculated into silkworms, where it reproduced using culture container, mini-kit successfully. Culture container, mini-kit is composed of a cylinder-shaped body and lid. The container is made of translucent polyethylene terephthalate. The size of the container is $82{\times}75mm$, reduced by 10 times as compared with the conventional culture kit. The mini kit has many advantages - high culture amount, ability of maintaining optimal humidity, parasite-free cultivation and high-end appearance. With the kit, the optimal cultivation condition is under $22^{\circ}C$, culture period of 53 days. And synnemata of P. tenuipes could be kept fresh for 14 days at the temperature of under $10^{\circ}C$. Therefore, the Min-kit can be used in both ways as a culture container and a packing kit for end-user customers.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.150-155
• /
• 2011

The aim of this study was investigated long distance export condition of paprika from Korea to Canada, and evaluated the effect of non-perforated breathable films on the storability of paprika during MA storage in the simulated long distance export condition. The long distance export condition of paprika from Korea to Canada was $7{\pm}1^{\circ}C$ and RH 90% during shipping for 20 days, and then the temperature of that was increased to $13^{\circ}C$ for 3 hours during transferring from refrigerated container to storage room in Canada, and decreased $3{\sim}4^{\circ}C$ for 3 days before distributing to local markets. The temperature and relative humidity of local markets was $16^{\circ}C$ and 60%, respectively. The packing material treatments were non-packing, as control, perforated film (6 mm diameter hole, $18holes/m^2$), and 3 kind of laser treated non-perforated films (oxygen transmission rate was 5,000, 20,000 and 100,000 $cc/m^2{\cdot}day{\cdot}atm$). Under the simulated long distance export condition; $7^{\circ}C$ and RH 90% for 15 days and then $20^{\circ}C$ and RH 55% for 7 days, the fresh weight loss of paprika was less than 1% in 3 kind of laser treated non-perforated film treatments but was more than 4% in control and perforated film treatment that showed severe deterioration of visual quality after 20 days of storage. The atmosphere of paprika packages was changed 5% oxygen and 15% carbon dioxide in 5,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment, and 16% oxygen and 4~5% carbon dioxide in 20,000 $cc/m^2{\cdot}day{\cdot}atm$ treatment during room temperature storage after cold storage for 15 days. A carbon dioxide concentration of these 2 treatments was exceeded the optimal MA and CA condition. There was no significant difference in ethylene concentration among 3 kind of laser treated non-perforated film treatments. A paprika packed with 100,000 $cc/m^2{\cdot}day{\cdot}atm$ non-perforated film showed the highest visual quality under the simulated long distance export condition. However, the firmness and soluble solids did not show any significant difference among 3 kind of laser treated non-perforated film treatments. Therefore, we may suggest that 100,000 $cc/m^2{\cdot}day{\cdot}atm$ laser treated non-perforated film was the proper film for MAP of paprika under long distance export condition that was $7{\pm}1^{\circ}C$ and RH 90% for 15 days, and then $20^{\circ}C$ and RH 55% for 7 days.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.115-125
• /
• 2022

The purpose of this study was to examine the effect of packaging on quality maintenance of paprika (Capsicum annuum L. cv. Nagano RZ) stored at three different temperatures. In Korea, paprika is stored and distributed under ambient conditions. To ensure the freshness maintenance, determining optimal storage temperature is necessary. Paprika were unpacked (control) or packed with polyamide film and stored at 5℃, 10℃ and 20℃ for 35 days. Quality characteristics such as weight loss and appearance were examined. Paprika packed with polyamide film showed less quality changes compared to unpacked paprika under all the storage temperatures. The commercial properties tended to decrease rapidly during storage at 20℃ regardless of packing. The degree of weight loss was significantly lower in packed paprika compared to unpacked paprika. It was found that soluble solids, pigments, hardness, etc. were complexly affected by storage temperature and film packaging. For paprika, the storage temperature of 5℃ or 10℃ was effective in maintaining freshness; paprika packed in polyamide film packing maintained greater freshness than unpacked paprika. Our results showed that, packaging is required to preserve the freshness and to improve the marketability of paprika in the domestic market. It seems that it is necessary to continuously search for an effective packaging method.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.617-621
• /
• 2016

On-site survey on glue-laminated board (GLB) manufacturers of Malaysia, Indonesia, and China was conducted to identify the cause of interception of regulated pest from imported GLBs from those countries, and to suggest optimal manufacturing processes of GLB for preventing quarantine risk associated with imported GLBs. The cause of pest interception was improper manufacturing processes, such as air drying or inadequate kiln drying of green laminae, improper storage of dried laminae before finger jointing and edge gluing, and/or incomplete packing of GLBs. In particular, Paulownia GLB manufacturing processes used in China, including air drying of laminae, were mostly poor in terms of preventing quarantine risk associated with imported GLBs. From now on, for preventing quarantine risk associated with imported GLBs, importers have to ask foreign manufacturers spontaneously to use proper manufacturing processes (adequate kiln drying of green laminae, proper storage of dried laminae, and complete packaging of final GLBs).

• Journal of Life Science
• /
• v.28 no.8
• /
• pp.977-984
• /
• 2018

This study aimed to enhance rutin contents by controlling germination condition for manufacturing buckwheat sprouts. Two kinds of buckwheat, a common buckwheat (Fagopyrum esculentum Moench) and a tartary buckwheat (Fagopyrum tataricum Gaertner) were used. By comparing the rutin content of two buckwheats, tartary buckwheat was 487 ppm, about 36 times higher than common buckwheat. Both common buckwheat and tartary buckwheat which germinated and grew under the light had higher rutin content relatively. In case of tartary buckwheat, rutin content of over 10 cm sprout was 4,579 ppm (without the light), and 5,160 ppm (with the light). Furthermore, tartary buckwheat was germinated and grew under different light strengths from 2,000 to 22,000 Lux. The rutin contents of tartary buckwheat sprout that was grown under the 22,000 Lux light was the highest. The rutin content was increased dramatically at 14,000 Lux of light. From 14,000 to 22,000 Lux, there was a little change on rutin content. Therefore, the condition of 14,000 Lux light was determined optimal for manufacturing tartary buckwheat sprouts. Also, rutin contents of extracts treated with 60, 70, 80 and $90^{\circ}C$ during different time had no significant difference. Therefore, rutin of tartary buckwheat sprout extract had thermostability up to $90^{\circ}C$.

• Biomedical Science Letters
• /
• v.11 no.1
• /
• pp.63-69
• /
• 2005

We investigated the changes of fibrinolytic and antioxidative activities of wild or cultivated Codonopsis lanceolata, which were packed in woven polypropylene (WP) film or low density polyethylene (LDPE) film and stored for 0, 15, and 30 days at refrigerated $(2\~4^{\circ}C)$ or room $(l8\~20^{\circ}C)$ temperature (So we have 16 samples, and wrote them as the abbreviated words such as W-WP-RE-15, W-WP-RO-15, W-LDPE-RE-15, W-LDPE-RO-15, W-WP-RE-30, W-WP-RO-30, W-LDPE-RE-30, W-LDPE-RO-30, C-WP-RE-15, C-WP-RO-15, C-LDPE-RE-15, C-LDPE-RO-15, C-WP-RE-30, C-WP-RO-30, C-LDPE-RE-30, C-LDPE-RO-30). Fibrinolytic activity of fresh Codonopsis lanceolata cultivated in the mountain or field were 0.8 unit (plasmin unit/ml) or 7.3 units, respectively. In descending order, the activities of wild Codonopsis lanceolata stored for 15 days were as followed; LDPE-RE (0.70 unit), WP-RO (0.52 unit), WP-RE (0.45 unit), and LDPE-RO (0.30 unit). After 30 days, fibrinolytic activities of them decreased to 0.47 unit (LDPE-RE), 0.28 unit (WP-RO), 0.21 unit (WP-RE), and 0.30 unit (LDPE-RO). Considering from the point of fibrinolytic activity, the optimal storage condition of wild Codonopsis lanceolata was packing with LDPE film and storing at $4^{\circ}C$. The change of fibrinolytic activities of Codonopsis lanceolata cultivated in the field revealed the similar trend as wild samples, but the fibrinolytic activities of 30 days-stored samples were maintained better than the wild Codonopsis lanceolata. Fibinolytic activity of wild Codonopsis lancealata was increased by heating for 5 min at $100^{\circ}C$ and decreased by addition of NaCl. Antioxidative activities of Codonopsis lanceolata were also compared from the electron donating activity. Fresh Codonopsis lanceolata had about $70\%$ of electron donating activity. Independent of cultivation area, electron donating activity dropped to $19\~74\%$ (wild Codonopsis lanceolata) and $27\~59\%$ (cultivated Codonopsis lanceolata) during 15 days storage. But after 30 days storage, we obtained the unexpected results, which meant that the activities were higher activities than 15 days-stored samples or even though the fresh samples. In general, Codonopsis lanceolata could maintain antioxidative activities most strongly with LDPE film and chilled condition.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.325-335
• /
• 2008

In this study, we used multi-channels ceramic membrane having larger permeate volume per unit time rather than tubular membrane. The hybrid process for advanced drinking water treatment was composed of granular activated carbons (GAC) packing between module inside and outside of multi-channels microfiltration membrane. Instead of natural organic matters (NOM) and fine inorganic particles in natural water source, modified solution was prepared with humic acid and kaolin. Kaolin concentration was fixed at 30mg/L and humic acid was changed as $2{\sim}10\;mg/L$ to inspect effect of organic matters. As a result, both resistance of membrane fouling ($R_f$) and permeate flux (J) were highly influenced by concentration of humic acid. Also, in result of water-back-flushing period (FT) effect, the shorter FT was the more effective to reduce membrane fouling and to enhance permeate flux because of frequent water-back-flushing. However, the optimal FT condition was 8 min when operating costs were considered. Then, the hybrid process using multi-channels ceramic membrane and GAC was applied to lake water treatment. As a result, average treatment efficiencies in our experiment using the hybrid process were 98.02% for turbidity, 75.64% for $UV_{254}$ absorbance, 7.18% for TDS and 84.73% for $COD_{Mn}$.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.225-233
• /
• 2003

The goal of a radiation treatment plan is to deliver a homogeneous dose to a target with minimal irradiation of the adjacent normal tissues. Dose uniformity is especially important for stereotactic radiosurgery using a linear accelerator. The dose uniformity and high dose delivery of a single spherical dose distribution exceed 70％. This also results with a similar stereotactic radiosurgical plan using a Gamma Knife. The dose distribution produced in a stereotactic radiosurgical plan using a Gamma Knife and Linear accelerator is spherical, and the application of the sphere packing arrangement in a real radiosurgical plan requires much time and skill. In this study, we found a characteristic of dose distribution with transformation of beam parameters that must be considered in a radiosurgical plan for effective radiosurgery. First, we assumed a cylinder type tumor model and a cube type tumor model. Secondly, the results of the tumor models were compared and analyzed with dose profiles and DVH_(Dose Volume Histogram) representative dose distribution. We found the optimal composition of beam parameters_(i.e. collimator size, number of isocenter, gap of isocenters etc.), which allowed the tumor models to be involved in the isodose curve at a high level. In conclusion, the characteristics found in this study are helpful for improving the effectiveness and speed of a radiosurgical plan for stereotactic radiosurgery.

• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.75-91
• /
• 2023

As the business-to-customer (B2C) online market expands after the COVID-19 pandemic, the logistics industry has been constructing automated warehouses to handle multi-product, low-volume logistics. When constructing a logistics automation warehouse, it is crucial to validate that the facility's performance and operational logic are designed to meet the required throughput of the automated warehouse from the system design phase. This study proposes simulation-based validation and optimal alternatives for an H logistics automation warehouse in Iksan, Jeollabuk-do. Firstly, we focused on the box supply and packing processes, which are related to the release process, among the entire logistic processes. Then, we analyzed the potential bottlenecks in the target process and designed and implemented a discrete-event simulation model based on the analysis results. The simulation experiments showed that the facility parameters and operational logic identified in the system design phase did not satisfy the performance requirements of the entire automated warehouse. Additional experiments were conducted to suggest alternatives to meet the system performance requirements by changing the facility parameters and operational logic. We expect that the proposed study will be utilized in the future, not only in the system design phase but also in the system construction phase, for verification purposes to ensure that the construction proceeds according to the design.