• 제목/요약/키워드: optimal growth condition

검색결과 538건 처리시간 0.034초

탄화붕소 소결 거동 연구를 위한 율속제어소결의 적용 (Application of rate-controlled sintering into the study of sintering behavior of boron carbide)

  • 이혁재
    • 한국결정성장학회지
    • /
    • 제25권1호
    • /
    • pp.6-12
    • /
    • 2015
  • 율속제어소결은 소결 공정 중 실시간으로 측정되는 시편의 팽창/수축거동을 이용해 일정한 수축거동을 하도록 로의 파워를 조정하는 소결방법으로, 온도를 조절하기 위해 로의 파워를 제어하는 일반적인 소결에 비해 시편의 소결 과정을 세밀히 제어할 수 있으며, 특히 소결공정의 최적화를 이룰 수 있는 장점이 있다. 본 연구에서는 탄화붕소의 소결에 율속 제어소결을 적용해 각 공정변수의 조절에 따른 소결온도 및 입자성장의 변화를 조사하여 그 상관관계를 규명하고 이를 기존의 이론에 맞추어 해석함으로써 율속제어소결을 어떻게 소결공정 최적화에 이용할 수 있는지 그 가능성을 알아보았으며 이를 통해 향후 미지 소재의 소결공정에 율속제어공정을 어떻게 적용할 수 있는지 고찰해 보았다.

Cordycepin 생성을 위한 배양조건 및 배지조성의 최적화 (Optimization of Culture Condition and Media Composition on the Production of Cordycepin by Cordyceps militaris.)

  • 조성준;이태희;채대훈;한영환
    • 미생물학회지
    • /
    • 제40권3호
    • /
    • pp.217-220
    • /
    • 2004
  • Cordyceps militaris의 액체 배양시 cordycepin(3'-deoxyadenosine) 생성에 영향을 주는 물리화학적 조건 및 배지 조성의 영향을 조사하였다. 사용된 17종 균주 중에서 C. militaris KCTC 6862, C. militaris KCTC 16932 및 C. militaris DGUM 32003이 우수한 cordycepin생산성을 보여주었다. Cordycepin생산에 적합한 최적 온도와 PH는 각각 $24^{\circ}C$와 pH 6.0-10범위이었다. YM배지에 탄소원으로 glucose를, 질소원으로 tryptone을 각 1% 첨가하였을 매 우수한 cordycepin 생산을 보여주었다. Tryptone을 질소원으로 하는 YMG 액체배지에서 5일간 배양하였을 경우, 39mg/l의 cordycepin의 농도가 측정되었다. 0.1%의 다양한 인산원을 각각 첨가한 결과, cordycepin생산을 저해하였다.

수직형 LPE장치를 이용한 InGaAsP/InP RWG(Ridge Waveguide) MQW-LD제작 (The fabrication of InGaAsP/InP RWG(ridge waveguide) MQW-LD by the vertical LPG system)

  • 박윤호;오수환;하홍춘;안세경;이석정;홍창희;조호성
    • 한국광학회지
    • /
    • 제7권2호
    • /
    • pp.150-156
    • /
    • 1996
  • 본 연구에서는 RWG MQW-LD가 weakly index-guided LD로 동작하기 위한 최적 걸게조건으로부터, 수직형 LPE장치를 사용하여 RWG MQW-LD를 제작하였다. 먼저 수회의 실험을 통해 MQW-DH웨이퍼를 photolithofraphy공정을 통해 폭이 4.mu.m인 ridge 패턴을 형성시켜 RWG MQW-LD를 제작하였으며 전기광학적 특성을 조사한 결과 I=2.7I$_{th}$ 이상에서도 측방향 단일모드 동작함을 알 수 있었다.

  • PDF

무살균 배지를 이용한 느타리버섯 재배 (Cultivation of Oyster Mushroom Using Non Sterilized Media)

  • 장현유;김혁
    • 한국자원식물학회지
    • /
    • 제14권3호
    • /
    • pp.196-205
    • /
    • 2001
  • NSM으로 무살균 재배를 여러 가지 배지를 혼합하여 균사생장과 밀도, 오염율을 실험한 결과는 다음과 같다. 첫째, 방울솜을 주재료로 하여 옥수수강과 비트, 미강을 각각 10, 20, 30, 40%를 혼합하였을 때 옥수수강, 미강, 비트 순으로 균사생장과 밀도가 양호한 결과를 보였으며 방울솜:옥수수강을 80 : 20(V/V)으로 혼합한 경우가 가장 양호하다. 특히 방울솜에 비트를 10% 이상 혼합하면 균사생장과 밀도가 현저히 불량한 특징이 있다. 둘째, 면자각을 주재료로 하여 옥수수강과 비트, 미강을 각각 10, 20, 30,40%를 혼합하였을 때 비트, 미강, 옥수수강 순으로 양호한 것으로 나타남에 따라 방울솜과 반대의 경향을 나타내었다. 특히 면자각에 미강을 20%이상 혼합하면 잡균오염도 높아질뿐만 아니라 균사생장과 밀도도 현저히 낮아지는 특징이 있다. 셋째, 방울솜을 주재료로 하여 옥수수강과 비트를 각각 혼합한 경 우 방울솜:옥수수강:비트를 70:20:10(V/V)로 혼합한 배지가 가장 양호 하였다. 넷째, 면자각을 주재료로 하여 옥수수강과 비트를 각각 혼합한 경우 면자각:옥수수강:비트를 70:20: 10(V/V)로 혼합한 배지가 가장 양호하였다. NSM의 적정 약제 농도별로는 500배가 가장 좋았으나 2,000배액에서도 균사생장은 비교적 좋은 결과를 나타내었으나 잡균오염율은 희석을 많이 하면 오염율이 높았다. NSM 배지의 적정수분함량은 77%가 적당하였으며, $25^{\circ}C$에서 배양하였을 때 균사밀도와균사속도가 양호하였다. NSM에 배지를 침지한 시간별로 조사한 결과 침지한 즉시 꺼내어 접종한 것이나 32시간 동안 침지한 것이나 동일한 효과가 있었으며 48시간 이상 침지하면 균사속도와 균사밀도가 약간 나빠지는 경향이 있었다. 따라서 NSM에 침지한 즉시 꺼내어 접종하면 균사생장과 균사밀도가 양호하였다. 즉 N.S.M을 이용하여 느타리버섯 폐면재배에 있어서 방울솜을 주재료로 하여 옥수수강, 비트, 미강을 혼합하여 균사생장, 균사밀도, 잡균오염도를 조사한 결과, 방울솜에 옥수수강을 20~30% 혼합하였을 때 균사생장이 76mm/10일 정도로 가장 양호하였고 균사밀도도 양호하였다.

  • PDF

Improvement of asymbiotic seed germination and seedling development of Cypripedium macranthos Sw. with organic additives

  • Huh, Yoon Sun;Lee, Joung Kwan;Nam, Sang Young;Paek, Kee Yoeup;Suh, Gang Uk
    • Journal of Plant Biotechnology
    • /
    • 제43권1호
    • /
    • pp.138-145
    • /
    • 2016
  • To find the optimal propagation condition for endangered Cypripedium macranthos Sw., also known as lady's slipper orchid, the effect of various organic additives on in vitro germination, protocorm formation and seedling growth was investigated during asymbiotic seed culture. When $100ml{\cdot}L^{-1}$ coconut water was added to the basal medium, the highest germination rate and protocorm formation rate were achieved, with 70.8% and 74.2% respectively. Supplementation of phloem sap from birch tree or maple tree also showed a facilitating effect to improve the germination and protocorm development. With $100ml{\cdot}L^{-1}$ birch sap or maple sap, both the germination and protocorm formation rates were roughly more than 65% and 68%. The roots and buds of the seedlings grew vigorously in the medium containing $100ml{\cdot}L^{-1}$ coconut water or phloem sap, in particular, their bud formation rates increased by more than 70%. Addition of banana powder and peptone could not create a more significantly favorable culture condition, and non-addition had the worst results. Our results demonstrated that proper organic amendments such as coconut water and phloem sap might be preferred to in vitro germination and the growth of seedlings developed from the protocorm of C. macranthos Sw. during asymbiotic seed culture.

옥상녹화 식물의 최적생육을 위한 토양수분 특성 연구 (Characteristics of Soil Moisture Rate for Optimal Growth Conditions on Greenroof Plants)

  • 김시만;한승원;장하경;김재순;정명일
    • 한국환경생태학회지
    • /
    • 제29권6호
    • /
    • pp.947-951
    • /
    • 2015
  • 본 연구는 옥상녹화를 비롯한 인공지반녹화에 활용 가능한 조경용 초화류의 원활한 생육을 위한 적정 관수 주기를 규명하고 옥상 조건에서 관수 필요 여부를 규명하고자 하였다. 옥상녹화에 적용 가능하며 관상가치가 있는 총 20종의 초본식물을 선정하여 녹화용 식물의 토양수분흡수특성을 알아보기 위한 시험과 관수주기에 따른 식물의 생육변화를 알아보기 위한 시험으로 나누어 시행하였다. 식물의 수분스트레스와 열스트레스를 최소화하기 위해서는 평균 4~5일 이전의 관수 주기가 요구되며 식물의 원활한 생장과 이에 따른 환경적 효과를 위해서는 반드시 관수 관리가 요구된다고 판단되었다. 이러한 결과는 건축물이나 인공지반 녹화 시 기초자료로 활용하여 지속가능한 식재계획 수립에 도움이 될 것으로 기대되며, 향후 좀 더 다양한 녹화식물들에 대한 연구가 필요할 것으로 생각된다.

응집 플록 성장률 측정기를 이용한 멤브레인 공정의 전처리 응집공정 평가 (Evaluations of Coagulation Process for Membrane Pre-treatment using Floc Growth Rate Analyzer)

  • 손희종;김상구;김도환;강소원;최영익
    • 한국환경과학회지
    • /
    • 제25권2호
    • /
    • pp.231-238
    • /
    • 2016
  • In this study, we have investigated to find optimal pre-treatment flocculation condition by analyzing the floc growth rate with mixing conditions and the membrane permeation flux for pre-treatment step of the membrane process. The higher mixing intensity showed a constant floc size index (FSI) values, and lower mixing intensity increased the degree of dispersion of the FSI values. Results of comparing the distribution characteristics of the FSI value and the permeation flux were more effective in increasing flux when the FSI values were 0.2 or higher. The degree of dispersion of FSI was relatively large in 40 rpm mixing condition compared to 120 rpm. In 40 rpm mixing condition, it decreased the permeation flux compared to 120 rpm because various sizes of flocs were distributed. Coagulation-UF membrane process enhanced 30%~40% of the flux rate compare to UF alone process, and the coagulation-MF process increased up to 5% of the flux rate compare to MF alone process. Pre-treatment, that is, coagulation process, has been found to be less effects on relatively larger pore size for MF membrane. For UF membrane, the flux was a little bit same when applying only the rapid mixing process or rapid mixing with slow mixing processes together. In case of MF membrane, the flux was improved when rapid mixing process applied with slow mixing process together.

다래(Actinidia arguta)의 절간절편체로부터 식물체 재분화 및 해부학적 관찰 (Plant Regeneration from Internode Explants of Actinidia arguta and its Histological Observation)

  • 김회경;김준철;진창덕
    • 식물조직배양학회지
    • /
    • 제24권5호
    • /
    • pp.263-268
    • /
    • 1997
  • 다래(A. arguta)의 절간조직을 절편체로하여 식물생장조절제의 종류와 광조건이 shoot 형성에 미치는 영향을 조사하였으며 아울러 기내발근을 통하여 다래로부터 완전한 식물체를 재분화시킬 수 있는 실험체제를 확립하였다. 절간절편체는 3.0 mg/L의 zeatin이 단독첨가된 배지에 암배양한 경우 62.5%로 높은 shoot 형성률을 나타내었다. 0.5mg/L NAA가 포함된 WPM 배지에 4주 동안 배양하여 발근시킨 식물체는 vermiculite와 perlite 가 1:1(v/v)로 혼합된 배양토에 1주간 순화시킨 후 일반토양에 이식한 결과, 완전한 식물체로 생장시킬 수 있었다. 다래의 절간절편체를 shoot 유도배지에 배양하여 shoot의 형성과정을 발달단계별로 조직학적인 측면에서 관찰한 결과, 배양초기에는 신장되거나 모양이 다양한 무정형의 세포가 대부분이었으나 배양이 진전됨에 따라 세포의 크기가 작고 세포질이 충만한 분열조직군이 형성되면서 이들로부터 장차 shoot로 발달될 shoot primordia가 형성되는 것을 관찰할 수 있었다.

  • PDF

Effect of High Temperature on Grain Characteristics and Quality during the Grain Filling Period

  • Chuloh Cho;Han-yong Jeong;Jinhee Park;Yurim Kim;Myoung-Goo Choi;Changhyun Choi;Chon-Sik Kang;Ki-Chang Jang;Jiyoung Shon
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2023년도 춘계학술대회
    • /
    • pp.51-51
    • /
    • 2023
  • Global warming has significant effects on the growth and development of wheat and can cause a reduction in grain yield and quality. Grain quality is a major factor determining the end-use quality of flour and a reduction in quality can result economic losses. Therefore, it is necessary to study the physiological characteristic of wheat to understand its response to temperature elevation, which can aid in the development of strategies to mitigate the negative effects of high temperature and sustain wheat production. This study investigated the effects of elevated temperature on grain characteristics and quality during the grain filling period of two Korean bread wheat cultivars Baekkang and Jokyoung. These two bread wheat cultivars were subjected to an increasing temperature conditions regime; T0 (control), T1 (T0+1℃), T2 (T0+2℃) and T3 (T0+3℃). The results showed that high temperature, particularly in T3 condition, caused a significant decrease in the number of grains per spike and grain yield compared to the T0 condition. The physical properties, such as grain weight and hardness, as well as chemical properties, such as starch, protein, gluten content and SDSS, which affect the quality of wheat, were changed by high temperature during the grain filling period. The grain weight and hardness increased, while the grain size not affected by high temperature. On the other hand, amylose content decreased, whereas protein, gluten content and SDSS increased in T3 condition. In this study, high temperature within 3℃ of the optimal growth temperature of wheat, quantity properties decreased while quality-related prosperities increased. To better understand the how this affects the grain's morphology and quality, further molecular and physiological studies are necessary.

  • PDF

Effect of suitable dietary glycine supplementation on growth production, meat quality, serum parameters, and stress alleviation of broiler under heat stress condition

  • Jiseon Son;Woo-Do Lee;Hyunsoo Kim;Eui-Chul Hong;Hee-Jin Kim;Yeon-Seo Yun;Hwan Ku Kang
    • 농업과학연구
    • /
    • 제50권4호
    • /
    • pp.603-616
    • /
    • 2023
  • This study was conducted to investigate the productivity, meat quality, blood variables, stress responses, and litter quality of broilers offered feed with different levels of Glycine (Gly) supplementation under heat stress condition. A total of 760 one-day-old Ross 308 broiler males were randomly assigned to one of the four dietary treatment groups: (1) basal diet (control; CON); (2) basal diet + Gly 0.1% (Gly 0.1%); (3) basal diet + Gly 0.2% (Gly 0.2%); and (4) basal diet + Gly 0.3% (Gly 0.3%). The environments for all the treatments groups were maintained according to broiler rearing guidelines from day 1 to day 21, and heat stress condition (32 ± 1℃, 60 ±5%) was created from day 22 to the end. The addition of Gly increased weight gain and affected feed intake (p < 0.05). Gly 0.1% group had higher pH and ferric reducing antioxidant power (FRAP) in the chicken meat and lower heterophil (HE)/lymphocyte (LY) ratio in the blood (p < 0.05). In particular, Gly 0.2% treatment group had lower serum corticosterone level (p < 0.05) than other groups. For jejunum morphology, the addition of Gly 0.2% significantly reduced the depth of the crypts (p < 0.05). However, the addition of Gly did not significantly affect litter quality (p > 0.05). In conclusion, the addition of glycine improved productivity and meat quality, alleviated heat stress, and improved intestinal function. Further studies are needed to determine the optimal level and mechanism of action of the additive when ingested.