• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.275-281
• /
• 2013

This study was conducted to increase the amount of bio-hydrogen production from microalgae(Chlorella vulgaris) in batch reactors by thermal pre-treatment. The optimization of thermal pre-treatment was conducted using statistic experimental design of response surface methodology. Two experimental parameters of temperature and reaction time were considered. The optimization condition was founded at the coded variables of <0.52, -0.07> corresponding to the experimental of heating temperature of $95.6^{\circ}C$ and reaction time of 57.9 min, respectively. Under the optimal condition, the maximum hydrogen production was predicted to 25.3mL $H_2/g$ dry cell weight (dcw), which was 9.1 times higher value of control(2.8mL $H_2/g$ dcw).

• KSBB Journal
• /
• 제14권4호
• /
• pp.495-502
• /
• 1999

The optimization of fed-batch yeast fermentation process has been performed using genetic algorithm(GA). Three strategies were designed and applied to obtain the optimal feed rate profiles. Genes in the chromosome (input variables for optimization) included feed rates on fixed time intervals (strategy I), or swiching times $t_s1\;and\;t_s2$, and feed rates on singular arc (strategy II), or feed rates and the length of time interval (strategy III). Strategy III showed the best results for all initial conditions due to efficient utilization of genetic information. Simulation results using GA showed similar or better performance compared with previous results by variational caculus and singular control approach.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권4호
• /
• pp.537-543
• /
• 1999

Whole horse beans (Vicia faba cv. Alfred) (WHB) were pressure toasted at different temperatures of 100, 118 and $136^{\circ}C$ for 3, 7, 15 and 30 minutes in order to determine an optimal heating conditions to increase bypass starch (BPSt) as glucose source which is usually limiting nutrient in highly producing dairy cows in the Netherlands. Starch (St) Ruminal Degradative Kinetics and Fermentation Characteristics of (SRDC) of WHB were determined using in sacco technique in 4 lactating dairy cows fed 47% hay and 53% concentrate according to Dutch dairy cow requirements. Measured characteristics of St were soluble fraction (S), potentially degradable fraction (D) and rate of degradation (Kd) of insoluble but degradable fraction. Based on measured characteristics, percentage bypass starch (BPSt) was calculated according to the Dutch new feed evaluation system: the DVE/OEB system. Pressure toasting temperatures significantly affected starch gelatinization (p<0.01). Degradability of Starch in the rumen was highly reduced by pressure toasting (p<0.01). S varied from 58.2% in the raw WHB (RWHB as a control) to 19.6% in $136^{\circ}C/15min$. S was reduced rapidly with increasing time and temperature (p<0.01). D varied from 41.8% in RWHB to 80.5% in $136^{\circ}C/15min$. D fraction was enormously increased with increasing time and temperature (p<0.01). Kd varied from 4.9%h in RWHB to 3.4%/h in $136^{\circ}C/15min$. All these effects resulted in increasing %BPSt from 29.0% in RWHB to 53.1% in $136^{\circ}C/15min$. Therefore BPSt increased from 93.5 g/kg in RWHB to 173.5 g/kg in $136^{\circ}C/15min$. The effects of pressure toasting on %BPSt and BPSt seemed to be linear up to the highest values tested. Therefore no optimal pressure toasting conditions could be determined at this stage. But among 10 treatments, The treatment of $136^{\circ}C/15min$was the best with the highest BPSt content. It was concluded that pressure toasting was effective in shifting starch degradation from rumen to small intestine to increase bypass starch.

• 산업기술연구
• /
• 제3권
• /
• pp.87-94
• /
• 1983

Heating characteristics of red pepper paste packed in report pouches of various thicknesses and their storage stability were investigated to determine the adequate processing conditions that good bacteriological safty and minimal quality changes could be obtained, when sterilized by using a steam-air system retort. A heat penetration into pouch-packed red pepper paste was carried out through by a conductive heat transfer, indicating a simple logarithmic heating curve, and the smaller thickness revealed the higher heat penetration rate, suggesting the possibility of high temperature-short time sterilization of red pepper paste. The processing conditions with Fo-value of 4.5 or higher were sufficient for keeping up bacterial safty, but based on C-value, better quality retention was obtained at pouch thickness of 15mm under the processing temperature of $120^{\circ}C$. Subsequent storage study revealed that the red pepper paste packed in 15mm and processed at $120^{\circ}C$ with Fo=4.5 could be held without any spoilage and overall acceptance change, when stored for 6 months at room temperature under the relative humidity of 70%. After 3 months storage in $38^{\circ}C$ under saturation humidity, overall acceptance of red pepper paste were judged not to be maintainable on the acceptable level, but it may be suggested that above the results could be kept up a desirable quality without any remarkable deterioration.

• KSBB Journal
• /
• 제26권1호
• /
• pp.13-18
• /
• 2011

본 연구에서는 $Ca(LA)_2$의 침전조건을 최적화하고 침전된 $Ca(LA)_2$ 용액에 황산을 처리하여 고순도, 고수율의 lactic acid를 회수할 수 있는 방법을 개발하고자 하였다. 특히 $Ca(LA)_2$의 용해도를 낮추기 위하여 여러 종류의 유기용매 첨가에 따른 영향을 평가하였다. 모델용액의 경우 침전을 위한 최적의 석회종류, 석회량, 교반속도, 시간, 온도, 유기용매 첨가량은 각각 CaO, 0.0175 g/mL, 220 rpm, 24 h, $5^{\circ}C$, ethanol 25% (v/v)이었으며 최적 조건 하에서 가장 높은 순도 (98%)와 수율(69%)을 얻을 수 있었다. 발효배양액 (lactic acid 순도: 69%, pH: 7.3)의 경우, 모델용액으로부터 얻은 최적의 조건 하에서 $Ca(LA)_2$ 회수 과정에서 64%, 회수된 $Ca(LA)_2$에 황산을 첨가 ($Ca(LA)_2/H_2SO_4$ molar ratio = 1:1)하여 lactic acid를 회수하는 과정에서 86%의 회수율을 각각 얻어 발효배양액으로부터 총괄 수율 55%로 lactic acid (순도: 88.6%)를 얻을 수 있었다.

• KSBB Journal
• /
• 제25권2호
• /
• pp.179-186
• /
• 2010

응집성 효모인 S. cerevisiae ATCC 96581를 이용한 최적의 에탄올 생산 공정 전략에 대하여 연구하였다. 효모의 특성을 고려하여, 효모 응집공정이 있는 반복 유가식 공정을 설계하였고, 이때 비멸균 포도당 분말을 매 12시간 마다 첨가하였고, 새로운 feeding medium을 24시간 혹은 36시간마다 세포 응집 후 교체 하였다. 이때 효모 응집이 없는 반복 유가식 공정과 비교 검토하였다. 최종적으로 24시간마다 세포를 응집시키고 상층배지를 제거하고 새로운 배지를 넣으면서 반복 유가식 에탄올 생산을 하는 것이 최적의 조건임을 알 수 있었고, 이때 120시간 동안 825 g의 에탄올을 생산 할 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제23권12호
• /
• pp.1757-1764
• /
• 2013

Trichoderma harzianum ZF-2 producing laccase was isolated from decaying samples from Shandong, China, and showed dye decolorization activities. The objective of this study was to optimize its culture conditions using a statistical analysis of its laccase production. The interactions between different fermentation parameters for laccase production were characterized using a Plackett-Burman design and the response surface methodology. The different media components were initially optimized using the conventional one-factor-at-a-time method and an orthogonal test design, and a Plackett-Burman experiment was then performed to evaluate the effects on laccase production. Wheat straw powder, soybean meal, and $CuSO_4$ were all found to have a significant influence on laccase production, and the optimal concentrations of these three factors were then sequentially investigated using the response surface methodology with a central composite design. The resulting optimal medium components for laccase production were determined as follows: wheat straw powder 7.63 g/l, soybean meal 23.07 g/l, $(NH_4)_2SO_4$ 1 g/l, $CuSO_4$ 0.51 g/l, Tween-20 1 g/l, $MgSO_4$ 1 g/l, and $KH_2PO_4$ 0.6 g/l. Using this optimized fermentation method, the yield of laccase was increased 59.68 times to 67.258 U/ml compared with the laccase production with an unoptimized medium. This is the first report on the statistical optimization of laccase production by Trichoderma harzianum ZF-2.

• 한국식품과학회지
• /
• 제45권5호
• /
• pp.571-577
• /
• 2013

본 연구에서는 김치나 젓갈 등 각종 발효식품으로부터 단백질 가수분해 활성이 있는 총 108주의 분리된 유산균 중 일정 수준이상의 protease 활성을 지니는 29주를 선정하였다. 그 중 두유단백질 분해능이 가장 높은 균주 MK1을 본 연구의 발효균주로 최종 선정하였고, 생리학적 특성 및 16S rRNA 유전자 염기서열등과 같은 분자유전학적 분석을 통해 Lactobacillus paracasei MK1로 동정 및 명명하였다. L. paracasei MK1을 이용하여 두유의 최적 발효산물을 제조하기 위하여 pH, 적정 산도, 생균수 및 단백질 분해 양상에 따른 최적화 연구를 실시하였다. L. paracasei MK1의 종배양액을 멸균한 두유에 2%(v/v)접종하여 발효시켰을 경우, 발효의 최적온도는 $30^{\circ}C$이었으며, 이 때의 적정산도와 pH는 발효 초기 0.15%와 pH 7.31에서 24시간 발효 후 0.98%과 pH 4.56으로 변화하였다. 생균수는 초기 6.94 log CFU/mL에서 발효 후 9.03 log CFU/mL로 증가하였다. 두유의 최적 희석배수는 50%로서 적정산도는 배양 24시간 후 0.08%에서 0.45%로 증가하였다. 최적 초기 pH는 6.0이었으며 탄소원으로 2%(w/v) glucose를 50%로 희석한 두유에 첨가하고, $30^{\circ}C$에서 두유 발효를 실시하였을 때 가장 적합한 발효 경향을 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제27권1호
• /
• pp.101-111
• /
• 2017

The task of improving a fungal strain is highly time-consuming due to the requirement of a large number of flasks in order to obtain a library with enough diversity. In addition, fermentations (particularly those for fungal cells) are typically performed in high-volume (100-250 ml) shake-flasks. In this study, for large and rapid screening of itaconic acid (IA) high-yielding mutants of Aspergillus terreus, a miniaturized culture method was developed using 12-well and 24-well microtiter plates (MTPs, working volume = 1-2 ml). These miniaturized MTP fermentations were successful, only when highly filamentous forms were induced in the growth cultures. Under these conditions, loose-pelleted morphologies of optimum sizes (less than 0.5 mm in diameter) were casually induced in the MTP production cultures, which turned out to be the prerequisite for the active IA biosynthesis by the mutated strains in the miniaturized fermentations. Another crucial factor for successful MTP fermentation was to supply an optimal amount of dissolved oxygen into the fermentation broth through increasing the agitation speed (240 rpm) and reducing the working volume (1 ml) of each 24-well microtiter plate. Notably, almost identical fermentation physiologies resulted in the 250 ml shake-flasks, as well as in the 12-well and 24-well MTP cultures conducted under the respective optimum conditions, as expressed in terms of the distribution of IA productivity of each mutant. These results reveal that MTP cultures could be considered as viable alternatives for the labor-intensive shake-flask fermentations even for filamentous fungal cells, leading to the rapid development of IA high-yield mutant strains.

• KSBB Journal
• /
• 제29권3호
• /
• pp.165-178
• /
• 2014

Statistical medium optimization has been carried out for the production of succinic acid in anaerobic fermentations of Actinobacillus succinogenes. Succinic acid utilized as a precursor of many industrially important chemicals is a fourcarbon dicarboxylic acid, biosynthesized as one of the fermentation products of anaerobic metabolism by A. succinogenes. Through OFAT (one factor at a time) experiments, corn steep liquor (CSL), a very cheap agricultural byproduct, was found to have significant effects on enhanced production of succinic acid, when supplemented along with yeast extract. Hence, using these factors including glucose as a carbon/energy source, interactive effects were investigated through $2^n$ full factorial design (FFD) experiments, showing that the concentration of each component (i.e., glucose, yeast extract and CSL) should be higher. Further statistical experiments were conducted along the steepest ascent path, followed by response surface method (RSM) in order to find out optimal concentrations of each constituent. Consequently, optimized concentrations of glucose, yeast extract and CSL were observed to be 180 g/L, 15.08 g/L and 20.75 g/L respectively (10 g/L of $NaHCO_3$ and 100 g/L of $MgCO_3$ to be supplemented as bicarbonate suppliers), with the estimated production level of succinic acid to be 92.9 g/L (about 3.5 fold higher productivity as compared to the initial medium). Notably, the RSM-estimated production level was almost similar to the amount of succinic acid (92.9 g/L vs. 89.1 g/L) produced through the actual fermentation process performed using the statistically optimized production medium.