• Reproductive and Developmental Biology
• /
• 제31권1호
• /
• pp.15-20
• /
• 2007

가축의 번식과 수요를 조절할 수 있는 생물학적 자극 통제 수단으로 새로운 돼지 페르몬성 냄새 물질를 탐색하고자, 기질 분자로서 2-cyclohexyloxytetrahydrofurane (A), 2-phenoxytetrahydrofurane (B) 유도체들의 설명인자인 물리화학 파라미터와 돼지 페로몬의 수용체 (pOBP)에 대한 결합 친화력 상수($p[Od.]_{50}$) 간의 2D-QSAR 모델을 유도하고 검토하였다. 2D-QSAR 모델은 결합 친화력 상수를 약 96.4% 설명하는 매우 양호한 모델($r^{2}=0.964$)로서 분자내 치환기의 소수성 (SL) 상수에 관한 적정값이 $(SL)_{opt.}=1.418$일 때 가장 높은 결합 친화력을 나타냄을 알았다. 그러므로 분자내 치환기의 소수성 인자가 결합 친화력 상수에 가장 큰 영향을 미치는 중요한 요소이었다.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.548-554
• /
• 2010

In this paper, a 1.5 kW Interior Permanent Magnet Synchronous Generator (IPMSG) with a power conditioner for the grid integration of a variable-speed wind turbine is developed. The power-conditioning system consists of a series-type 12-pulse diode rectifier powered by a phase shifting transformer and then cascaded to a PWM voltage source inverter. The PWM inverter is utilized to supply sinusoidal currents to the utility line by controlling the active and reactive current components in the q-d rotating reference frame. While the q-axis active current of the PWM inverter is regulated to follow an optimized active current reference so as to track the maximum power of the wind turbine. The d-axis reactive current can be adjusted to control the reactive power and voltage. In order to track the maximum power of the wind turbine, the optimal active current reference is determined by using a simple MPPT algorithm which requires only three sensors. Moreover, the phase angle of the utility voltage is detected using a simple electronic circuit consisting of both a zero-crossing voltage detecting circuit and a counter circuit employed with a crystal oscillator. At the generator terminals, a passive filter is designed not only to decrease the harmonic voltages and currents observed at the terminals of the IPMSG but also to improve the generator efficiency. The laboratory results indicate that the losses in the IPMSG can be effectively reduced by setting a passive filter at the generator terminals.

• 품질경영학회지
• /
• 제44권2호
• /
• pp.389-408
• /
• 2016

Purpose: This study was designed to analyze the behavioral change of knowledge structures and the trends of research topics in the quality management field. Methods: The network structure and knowledge structure of the words were visualized in map form using co-word analysis, cluster analysis and strategic diagram. Results: Summarizing the research results obtained in this study are as follows. First, the word network derived from co-occurrence matrix had 106 nodes and 5,314 links and its density was analyzed to 0.95. Average betweenness centrality of word network was 2.37. In addition, average closeness centrality and average eigenvector centrality of word network were 0.01. Second, by applying optimal criteria of cluster decision and K-means algorithm to word co-occurrence matrix, 106 words were grouped into seven clusters such as standard & efficiency, product design, reliability, control chart, quality model, 6 sigma, and service quality. Conclusion: According to the results of strategic diagram analysis over time, the traditional research topics of quality management field related to reliability, 6 sigma, control chart topics in the third quadrant were revealed to be declined for their study importance. Research topics related to product design and customer satisfaction were found to be an important research topic over analysis periods. Research topic related to management innovation was emerging state and the scope of research topics related to process model was extended to research topics with system performance. Research topic related to service quality located in the first quadrant was analyzed as the key research topic.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.85-91
• /
• 2014

현재 능동적인 조명제어와 관리기술이 연구되어 상용화되고 있다. 아파트 단지 등 복합 지능공간에서 유비쿼터스 서비스 기술을 응용하여 다중 지능 공간을 관리하는 시스템을 구축하여 활용하면, 에너지 사용 관련 의사결정을 지원 하고, 에너지의 효율을 높이며 생활의 안락함을 최적의 상태로 유지할 수 있을 것이다. 이를 위해서 지그비 메쉬망을 통해 수집된 전력 데이터를 가공하고, 상황에 적합한 서비스를 검색하기 위한 기능을 제공하는 분산형 자율 제어 미들웨어 및 에너지 관리 시스템이 필요하다. 본 논문에서는 지능 공간에서 유비쿼터스 서비스 제공을 위한 홈 서버 등의 플랫폼에 기반한 소프트웨어로 탑재되어 양방향 통신이 가능하고 다양한 무선 센서노드와 제어 네트워크, 에너지 디스플레이 디바이스 등을 활용하여 에너지 사용 관련 의사결정을 지원하는 분산형 자율제어 미들웨어 및 실시간 스마트 에너지 정보시스템(DDLEMS)을 설계 한다.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4397-4402
• /
• 2011

The NF-${\kappa}B$ system of transcription factors plays a crucial role in inflammatory diseases, making it an important drug target. We combined quantitative structure activity relationships for predicting the activity of new compounds and quantitative dynamic models for the NF-${\kappa}B$ network with intracellular concentration models. GFA-MLR QSAR analysis was employed to determine the optimal QSAR equation. To validate the predictability of the $IKK{\beta}$ QSAR model for an external set of inhibitors, a set of ordinary differential equations and mass action kinetics were used for modeling the NF-${\kappa}B$ dynamic system. The reaction parameters were obtained from previously reported research. In the IKKb QSAR model, good cross-validated $q^2$ (0.782) and conventional $r^2$ (0.808) values demonstrated the correlation between the descriptors and each of their activities and reliably predicted the $IKK{\beta}$ activities. Using a developed simulation model of the NF-${\kappa}B$ signaling pathway, we demonstrated differences in $I{\kappa}B$ mRNA expression between normal and different inhibitory states. When the inhibition efficiency increased, inhibitor 1 (PS-1145) led to long-term oscillations. The combined computational modeling and NF-${\kappa}B$ dynamic simulations can be used to understand the inhibition mechanisms and thereby result in the design of mechanism-based inhibitors.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.272-275
• /
• 2014

An improved fuzzy Kalman filtering speed estimation scheme was proposed by means of measuring stator side voltage and current value based on vector control state equation of induction motor. The designed fuzzy adaptive controller conducted recursive online correction of measurement noise covariance matrix by monitoring the ratio of theory residuals and actual residuals to make it approach real noise level gradually, allowing the filter to perform optimal estimation to improve estimation accuracy of EKF. Meanwhile, co-simulation scheme based on MATLAB and Ansoft was proposed in order to improve simulation accuracy. Field-circuit coupling problems of induction motor under the action of vector control were solved and the parameter optimization accuracy was improved dramatically. The simulation and experimental results show that this algorithm has a strong ability to inhibit the random measurement noise. It is able to estimate motor speed accurately, and has superior static and dynamic characteristics.

• 제어로봇시스템학회논문지
• /
• 제3권4호
• /
• pp.381-388
• /
• 1997

This paper proposes a heuristic algorithm to efficiently perform line balancing in the PCB assembly line including multiple surface mounters efficiently. Generally, the problems in line balancing are classified into two kinds. Firstly, is the determining of the minimum number of machines required for achieving the desired production rate. Secondly, is the assign of jobs to multiple machines in order to minimize the cycle time which is defined as a maximum among the working times of machines when the number of machines is fixed. In this paper, we deal with the latter. We consider a PCB assembly line, including the multiple surface mounters arranged serially as a target system. Also, the conveyor is assumed to move at a constant speed and have no buffer. Considering that the minimum number of machines required for the desired production rate is a discrete nonincreasing function which is inversely proportional to the cycle time, we propose an optimization algorithm for line balancing by using the binary search method. The algorithm is validated through computer simulation, the results of which show that their shapes coincide nearly with those of optimal line balancing efficiency graphs regardless of the number of components, the performance of surface mounters, and the structure of assembly line.

• 대한전자공학회논문지TC
• /
• 제40권7호
• /
• pp.261-272
• /
• 2003

Ethernet PON(Passive Optical Network)은 최근 활발하게 연구되고 있는 경제적이고 효율적인 가입자망이다. 차세대 가입자망인 Ethernet PON의 MAC(Media Access Control) 프로토콜은 TDMA(Time Division Multiple Access)방식을 기본으로 하며, QoS(Qualify of Service)를 보장해야 하는 전용회선(Leased Line) 가입자에 적합한 고정 할당 방식과 LAN/MAN의 최선형(Best Effort) 방식에 적합한 동적 할당 방식으로 나눌 수 있다. 본 논문에서는 이들 프로토콜의 성능을 분석하기 위하여 OPNET 시뮬레이션 도구를 이용해 Ethernet PON 모델을 설계한다. 설계된 모델에 대한 단대단 Ethernet 지연(end-to-end Ethernet delay), 큐잉 지연(queuing delay), 처리(throughput)과 사용률(utilization) 분석을 통해서 MAC 프로토콜을 검증하고, 하나의 OLT(Optical Line Terminal)가 수용할 수 있는 최적의 ONU(Optical Network Unit) 개수를 산정한다. 또한, 적정한 ONU의 버퍼 크기를 제안하여 Ethernet PON의 망 효율을 극대화하는 방안을 제시한다.

• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.38-44
• /
• 2009

Recently, the research focused on fuel cell hybrid vehicles (FCHVs) is becoming an attractive solution due to environmental pollution generated by fossil fuel vehicles. The proper energy control strategy will result in extending the fuel cell lifetime, increasing of energy efficiency and an improvement of vehicle performance. Battery state of charge (SoC) is an important quantity and the estimation of the SoC is also the basis of the energy control strategy for hybrid electric vehicles. Estimating the battery's SoC is complicated by the fact that the SoC depends on many factors such as temperature, battery capacitance and internal resistance. In this paper, battery charging time estimated by SoC is studied by using the speed response and current response. Hybrid system is consist of a fuel cell unit and a battery in series connection. For experiment, speed response of vehicle and current response of battery were determined under different state of charge. As the results, the optimal battery charging time can be estimated. Current response time was faster than RPM response time at low speed and vice versa at high speed.

• 환경위생공학
• /
• 제23권3호
• /
• pp.59-71
• /
• 2008

In this study, we intend to present the uncontrolled landfill maintenance plans by diversely reviewing the operating conditions of landfill and environmental effects and economical issues resulted from the operation of landfill for the purpose of suggesting the optimal maintenance plans applicable to the uncontrolled landfill and unused landfill located in Korea. We perform the basic and precise surveys against three landfill sites showing the biggest problem out of 8 unsanitary landfills sites located in Y County. We compare and review the treatment plans prepared and operated by the N Landfill. The compared and reviewed results show that the local stabilization plan is more effective than the excavation and transfer treatment plan when considering the economic efficiency only. However, the excavation and transfer treatment plan is valid when considering the diverse elements. The G Landfill is operated with separated into living waste landfill section and construction waste landfill section. However, some landfill gas collection bores or holes are installed in its living waste landfill section, which has not been used for about 20 years, as a part of follow-up control. The element causing the environmental damage is considerably reduced in its living waste landfill section. However, the effort to keep the follow-up control through the local stabilization work is required. The landfill is under processing in the construction waste landfill section. However, most of buried wastes are the inorganic wastes such as waste materials and concrete, so the maintenance plan focused on the use of top land by installing the local stabilization facilities is considered as an effective plan. The landfill is under processing in the K Landfill. It seems to be difficult to maintain this landfill through the local stabilization. The excavation and transfer treatment plan to completely remove the potential environmental pollution source is considered as the valid plan.