• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.6-10
• /
• 2015

RF energy harvesting technology is a promising technology for generating the electrical power from ambient RF signal to operate low-power consumption devices(eg. sensor) in wireless communication networks. This paper, motivated by this and building upon existing CR(Cognitive Radio) network model, proposes a optimal control policy for RF energy harvesting CR networks model where secondary users that have low power consumption harvest ambient RF energy from transmission by nearby active primary users, while periodically sensing and opportunistically accessing the licensed spectrum to the primary user's network. We consider that primary users and secondary users are distributed as Poisson point processes and contact with their intended receivers at fixed distances. Finally we can derive the optimal frame duration, transmission power and density of secondary user from the proposed model that can maximize the secondary users's throughput under the given several conditions and suggest future directions of research.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.1-5
• /
• 2015

Recently, RF energy harvesting technology is a promising technology for small-size IoT(Internet of Things) devices such as sensor to resolve battery scarcity problem. When applied to existing cognitive radio networks, this technology can be expected to increase network throughput through the increase of cognitive user's operating time. This paper proposes a optimal channel-selection policy for RF energy harvesting CR networks model where cognitive users in harvesting zone harvest ambient RF energy from transmission by nearby active primary users and the others in non-harvesting zone choose the channel and communicate with their receiver. We consider that primary users and secondary users are distributed as Poisson point processes and contact with their intended receivers at fixed distances. Finally we can derive the optimal frame duration, transmission power and density of secondary user from the proposed model that can maximize the secondary users's throughput under the given several conditions and suggest future directions of research.

• Journal of Korean Society on Water Environment
• /
• v.34 no.2
• /
• pp.210-215
• /
• 2018

It is difficult to count colonial cyanobacteria Microcystis cells since the thickness of colonies is constrained by amorphous mucilage, making it impossible to estimate the number of cells. Disaggregation of Microcystis colonies into single cell is needed to improve the accuracy and precision of cell density estimation of naturally collected samples. Uultrasonic treatment method is commonly used owing to the simplicity and immediacy of the procedure. However, amplitude, frequency, and duration of ultrasonic treatment also cause cell loss during the experiment. Optimal ultrasonic treatment has not been standardized yet. Therefore, the objective of this study was to investigate optimal ultrasonic treatment by analyzing cell density and colony numbers. We collected colonial Microcystis from Changnyeong-Haman weir area in Nakdong River during harmful algal boom period from September to October in 2017. Ultrasonic treatment method was applied to disrupt colonies into single cells to enumerate cell density. Among treatment conditions, results from continuously treated for 100 seconds were found to be the optimum to reduce colonies to a suspension of single cell without cell losses under high and low density of Microcystis cells. Lugol iodine fixed cells followed by sonication showed less negative impact of cell damage within the optimal treatment time (100 seconds). Furthermore, disaggregated cells treated by sonication enables microscopic observation more easily since gas vacuoles were collapsed to facilitate sedimentation of cells under the counting chamber for quantitative enumeration of buoyant Microcystis cells.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.539-544
• /
• 2013

The effects of culture depth (2-10 cm) and cell density on the growth rate and biomass productivity of Chlorella sp. XQ-200419 were investigated through the use of a self-designed open circular pond photobioreactor-imitation system. With increases in culture depths from 2 to 10 cm, the growth rate decreased significantly from 1.08 /d to 0.39 /d. However, the biomass productivity only increased slightly from 8.41 to 11.22 $g/m^2/d$. The biomass productivity (11.08 $g/m^2/d$) achieved in 4 cm culture with an initial $OD_{540}$ of 0.95 was similar to that achieved in 10 cm culture with an initial $OD_{540}$ of 0.5. In addition, the duration of maximal areal productivity at a 4 cm depth was prolonged from 1 to 4 days, a finding that was also similar to that of the culture at a 10 cm depth. In both cases, the initial areal biomass densities were identical. Based on these results and previous studies, it can be concluded that the influence of culture depth and cell density on areal biomass productivity is actually due to different areal biomass densities. Under suitable conditions, there are a range of optimal biomass densities, and areal biomass productivity reaches its maximum when the biomass density is within these optimal ranges. Otherwise, biomass productivity will decrease. Therefore, a key factor for high biomass productivity is to maintain an optimal biomass density.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.9 no.2
• /
• pp.110-122
• /
• 2005

Background: The basic concept of thermographic interpretation is the thermologic equality of both side in normal person. But both sides diseases were limited diagnostic values by thermographic interpretation, and this interpretation does not apply to the case in thermal temperature of each part of body. Nevertheless, the measurement conditions are not standardized. So, for its clinical applications are extended, we think that the measurement conditions are considered the individual variations. Objectives: The purpose of this study is to examine the optimum conditions thermal temperature of the time period and region are not effected by internal and external variables. Methods: After the subjects took off their clothes, the filming were repeatedly five times made on duration of 5minutes during 20minutes. We selected nine regions around acupoints including Yin dang[印堂, HN1], Sugu[水溝, GV26], Ch’ondol[天突, CV22], Chonjung[CV17], Chung-wan[中脘, CV12], Ch’onch'u[天樞 S25], No-gung[勞宮, P8], and calculated based on the utility of R.O.I.(Region of Integer) in our system these points temperature. We measured the optimal time period and region that has little variation of thermal temperature. Results: The results shows that the optimal time period is 20minutes after undressed, and the optimal region is the region around acupoints including Sugu[水溝, GV26]. Conclusions: we obtained the measurement conditions were considered the individual variations. And also, this study offers basic sources for that the measurement conditions would be standardized. Furthermore, based on this results, we expect that clinical applications using thermography would be extended.

• The Korean Journal of Physiology and Pharmacology
• /
• v.19 no.2
• /
• pp.167-175
• /
• 2015

A retinal prosthesis is being developed for the restoration of vision in patients with retinitis pigmentosa (RP) and age-related macular degeneration (AMD). Determining optimal electrical stimulation parameters for the prosthesis is one of the most important elements for the development of a viable retinal prosthesis. Here, we investigated the effects of different charge-balanced biphasic pulses with regard to their effectiveness in evoking retinal ganglion cell (RGC) responses. Retinal degeneration (rd1) mice were used (n=17). From the ex-vivo retinal preparation, retinal patches were placed ganglion cell layer down onto an $8{\times}8$ multielectrode array (MEA) and RGC responses were recorded while applying electrical stimuli. For asymmetric pulses, 1st phase of the pulse is the same with symmetric pulse but the amplitude of 2nd phase of the pulse is less than $10{\mu}A$ and charge balanced condition is satisfied by lengthening the duration of the pulse. For intensities (or duration) modulation, duration (or amplitude) of the pulse was fixed to $500{\mu}s$($30{\mu}A$), changing the intensities (or duration) from 2 to $60{\mu}A$(60 to $1000{\mu}s$). RGCs were classified as response-positive when PSTH showed multiple (3~4) peaks within 400 ms post stimulus and the number of spikes was at least 30% more than that for the immediate pre-stimulus 400 ms period. RGC responses were well modulated both with anodic and cathodic phase-1st biphasic pulses. Cathodic phase-1st pulses produced significantly better modulation of RGC activity than anodic phase-1st pulses regardless of symmetry of the pulse.

• Journal of Embryo Transfer
• /
• v.21 no.2
• /
• pp.109-119
• /
• 2006

This study was conducted to examine relationship between vaginal cytology and reproductive hormones during the estrous cycle and to provide basic data to estimate for ovulation time and optimal mating time in 6 beagle dogs The duration of proestrus, estrus and diestrus were $8.5{\pm}1.4,\;10.0{\pm}1.4\;and\;54.0{\pm}2.8$ days at pregnant respectively, and $7.9{\pm}2.1,\;9.5{\pm}0.7\;and\;62.0{\pm}11.3$ days at non-pregnant respectively. The duration of interestrous intervals were $246.2{\pm}24.5$ days at pregnancy, and $175.3{\pm}34.5$ days at non-pregnancy. The duration of interestrous intervals at pregnancy was longer than that of non-pregnancy. A characteristic features of vaginal cytology during the estrous cycle were the high proportion of superficial cell, anuclear cell and erythrocyte in proestrus and estrus, parabasal cell, small intermediate cell and leukocyte in diestrus, and parabasal cell and small intermediate cell in anestrus, respectively. Cornification index (CI) in proestrus and estrus were significantly higher than that of CI in diestrus and anestrus. Plasma progesterone concentration was below 1.0 ng/ml at the first day of vulval bleeding at pregnancy and non-pregnancy, and then it was above 2.0 ng/ml at Day -2 in all bitches. When plasma progesterone concentration was first increased above 4.0 ng/ml, it was the second day after the first day of male acceptance. Plasma progesterone concentration showed above 40 ng/ml on Day $20{\sim}22$ in all bitches, and then it was gradually decreased until Day 35. Plasma progesterone concentration at pregnancy was higher than that of non-pregnancy from Day 35 to Day 63. Plasma estradiol-$17\;{\beta}$ concentration was above 9.0 pg/ml at the first day of vulval bleeding, and it showed 26.4 pg/ml on Day -2. When it was timed from the first day of male acceptance (Day 0), plasma estradiol-$17{\beta}$ concentration showed a peak on Day 0 and plasma progesterone concentration was first increased above 4.0 ng/ml on Day 2 which was the third day after plasma estradiol-$17{\beta}$ peak. CI was first increased above 80 and 90% on Day -1 and Day 1, respectively. CI was maintained above 80% from Day -1 to Day 8 (10 days) and above 90% from Day 1 to Day 6 (6 days), respectively. CI was maintained above 80% from Day 0 to Day 8 (9 days) and above 90% from Day 1 to Day 6 (6 days), respectively. Plasma progesterone concentration was first increased above 4.0 ng/ml on the second day after the day which CI was first increased above 90%. In conclusion, beagle bitches ovulated on the second day after the day which CI was first increased above 90% and on the day which plasma progesterone concentration was first increased 4.0 ng/ml, and it was estimated that the optimal mating time was the day which the second day after CI was first increased above 90% and plasma concentration was between $2{\sim}25ng/ml$. The measurement of plasma progesterone was used to determine of and accurate ovulation time and the optimal mating time, but vaginal cytology is low-priced and simple method to estimate estrous cycle, optimal mating time and ovulation time.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.33-43
• /
• 2007

The pickup and delivery problem with time windows generally involves the construction of optimal routeswhich satisfy a set of transportation requests under pairing, precedence, time window, vehicle capacity, andavailability constraints. In this paper, we added some constraints to the problem and adopted an objectivefunction based on number of used vehicles, total travel distance and total schedule duration to consider morerealistic problems. A branch and price algohthm for the problem is proposed and an enumeration method is usedfor the subproblems. The algorithm was tested on randomly generated instances and computational results werereported.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.473-481
• /
• 2000

Civil structures are becoming more flexible and lightly damped. When subjected to dynamic loads such as wind, earthquake and wave, vibration may be easily induced and lasted for lond duration. To suppress the wind-induced and earthquake-induced vibration of high-rise buildings, study on the development of a tuned mass damper has been carried out. Based on optimal design on passive tuned mass damper which is considered for a building subject to random excitations, a biaxial tuned mass damper was designed and developed. It is confirmed that the vibration levels of the test structure are reduced using the developed tuned mass damper.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1109-1112
• /
• 2005

The software reliability is defined, and not only the relations between testing time and reliability, but also the relation between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through evaluating the cost for each condition. Also, the release time is determined depending on the conditions of the first reliability, considering the specified reliability. The optimum release time is determined by simultaneously studying two optimum release time issues that determine both the cost related time and the specified reliability related time. And, each condition and limitation are studied. The trend of the optimum time is also examined.