• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.88-93
• /
• 2012

In this study, Machining fine shaft was examined by Lathe. method is proposed to control the thrust force to 0. through relationship between the cutting depth and the thrust force in turning, fine-shaft of less than 0.1mm diameter in turning is confirmed experimentally. also we propose practical expression to control thrust force in turning Through to change the approach angle, optimal tool design would be possible in turning.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.166-170
• /
• 2012

Most of Cudriania tricuspidata Bureau saplings in Korea have been produced by crown division. But the production of Cudriania tricuspidata B. saplings by this method is very low in efficiency and in uniformity. Therefore, to develop Cudriania tricuspidata B. saplings production system by cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to temperature on the bed, length, thickness of the hard wood cutting and rooting agent application. Of different concentration of rooting agent, the 5,000 ppm of 1-naphthalenacetic acid(NAA) and Indole butyric acid(IBA) were found to be the highest in rooting of hardwood cuttings; other concentration were in order as follows; 2,500, 1,000 and 10,000 ppm in concentration of rooting agents. The shading ratio of polyethylene film showed the highest rooting ratio of the softwood cuttings at 55%.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.46-53
• /
• 1996

Micro drilling is one of the most important machining types and its necessity becomes more and more increasing in the whole field of industry. Micro drilling, however, has few the case of practical application, because it requests high techniques : manufacturing micro drill, treating chip, producting precise hole shape and progressing machining effeciency. Micro drilling has a technical problem: drill breakage from the lack of drill rigdity and the interuption of chip. It is, therefore, essential to select the proper cutting conditions and the step fed for the method solving the lack of rigidity and the interruption of chip. Especially, step feed is very efficient to avoid the breakage of drill, but bring about reducing of cutting efficiency. The study on step feed must be requested more than the present in the near future. The purpose of this paper is to investigate experimentally about cutting conditions which affect on tools and round errors and to estimate about the effect of step feed as well as optimal step feed size to solve the breakage of drill.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.190-195
• /
• 2006

The purpose of this study was to figure out the best condition in growth and sod quality of Mentha spp. according to cutting methods and soil depth. Applemint (M. suaveolens), Peppermint (M. piperita), and Spearmint (M. spicata) were used. Regardless of cultivar and soil depth condition, the growth rate in top cutting was higher than layering method. The difference between layering and layering without apical meristem was not significant. Optimal condition for growth was 5cm depth of soil. However, the shallower the depth of the soil, the better quality of sod. Among three Mentha species, M suavelens showed plant height and node number and M. piperita had shoot number were higher than other variety. The best condition of sod was top cutting and 1cm depth of soil regardless of cultivar.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.221-227
• /
• 1998

A study to analyze and solve problems of rotor metal cutting experiment has presented in this paper. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.1898-1909
• /
• 1993

In this paper, a convenient scheme for solving multi-objective optimization problems including fuzzy information in both objective functions and constraints is presented. At first, a multi-objective problem is converted into single objective problem based on the norm method, and a merbership function is constructed by selecting its type and providing the parameters defined by the norm method. Finally, this fuzzy programming problem is converted into an ordinary optimization problem which can be solved by usual nonlinear programming techniques. With this scheme, a designer can conveniently obtain pareto optimal solutions of a fuzzy system only by providing some parameters corresponding to the importance of the objectiv functions. Proposed scheme is simple and efficient in treating multi-objective fuzzy systems compared with and method by with membership function value is provided interactively. To show the validity of the scheme, a simple 3-bar truss example and optimal cutting problem are solved, and the results show that the scheme is very useful and easy to treat multi-objective fuzzy systems.

• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.195-203
• /
• 2011

Forest in the our country is in the age that needs positive operation in order to foster economical forest. Multiple operations for making valuable forest should be conducted steadily and timely from afforestation to harvesting. In order to execute these kinds of forest operations, the construction of skid trail network that can be effectively used as a pathway for forestry machine and working space is necessary. To investigate facility effect of skid trail network, we executed the location of skid trail network through centroid method by GIS for 50ha of harvesting workplace in mechanized model forest located in Hongcheon, Gangwon Province. As a result of this research, skid trail density in this area changed from 79m/ha with current method to 42m/ha with improved method. It appeared that skid trail density with improved method is nearly half of current method even though the cutting area is the same as the current cutting area. Also, skidding distance changed from 117m with current method to 57m with improved method. It appears that skidding distance with improved method is nearly half of current method even though cutting area was enlarged in adjacent tending cutting area.

• The Journal of Korean Medicine
• /
• v.43 no.1
• /
• pp.1-5
• /
• 2022

Objectives: Using algometer, measure the pressure pain threshold (PPT) of the epigastric pain(心下痞硬) and calculate the cut-off value, and this can serve as the basis for prognostic diagnosis of functional dyspepsia so we would like to evaluate its diagnostic value. Methods: We investigated 353 patients with functional dyspepsia symptoms who admitted Gangnam Weedahm Oriental Hospital from February 1, 2021 to February 27, 2021. At the time of the patient's visit, an oriental medical doctor measured the pressure at the first pain point on the Algometer of (CV14), twice each, at 1minute intervals. The ROC (receiver operating characteristic) curve and the optimal cut-off value derived through the diagnosis of the (CV14) PPT value for epigastric pain(心下痞硬) and the gold standard of oriental medical doctor, it was evaluated through. Results: In 353 patients, the area under the ROC curve (AUC) was 0.909 (p=0). In addition, the optimal cutting value was 10.05 (kg/cm2), which was statistically significant. Additionally, the sensitivity of the Algometer's PPT measurement was 0.704 and the specificity was 0.884. As a result, if the PPT value of the Algometer exceeds 10.05 (kg/cm²) in terms of the optimal cutting value, it can be seen that epigastric pain(心下痞硬) is lost. Conclusion: Algometer's PPT value measurement can be a reliable test method for quantification of epigastric pain(心下痞硬) diagnosis and can be useful as an objective indicator.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.398-406
• /
• 2010

The purpose of this study was to determine the optimal mixing ratios for three different concentrations of maltodextrin, dehydration time, and cutting thickness to prepare gingers using molecular press dehydration (MPD) through response surface methodology (RSM) based on the dehydration rate, rehydration rate, and a sensory evaluation. As maltodextrin concentration increased, dehydration rate, rehydration rate, external, flavor, texture, overall acceptability of the gingers tended to be high, and the color tended to be low. As the dehydration time and cutting thickness increased, dehydration rate, rehydration rate and the sensory evaluation of the gingers tended to be high. The maltodextrin concentrations were 70-82%, dehydration time was 5.2-9.2 hr, and cutting thickness levels were 1.0-1.2 mm. The optimal mixing ratios, maltodextrin concentration, dehydration time, and cutting thickness for manufacturing the best quality of gingers using molecular press dehydration were 76%, 7.2 hr, and 1.1 mm, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.45-50
• /
• 2007

The aspheric lens has become the most popular optical component used in various optical devices such as digital cameras, pick-up lenses, printers, copiers etc. Using aspheric lenses not only miniaturizes and reduces the weight of products, but also lower prices and higher field angles can be realized. Additionally, plastic lenses are being changed to glass lenses more recently because of low accuracy, low acid-resistance and low thermal-resistance in the plastic lenses. Currently, one fabrication method of glass lenses is using a glass-mold method with a high precision mold core for mass production. In this paper, DOE (Design Of Experiments) and compensation machining were adopted to improve the surface roughness and the form accuracy of the mold core. The DOE has been done in order to discover the optimal grinding conditions which minimize the surface roughness with factors such as work spindle revolution, turbine spindle revolution, federate and cutting depth. And the compensation machining is used to generate high form accuracy of the mold core. From various experiments and analyses, we could obtain the best surface roughness 5 nm in Ra, form accuracy $0.167\;{\mu}m$ in PV.